Update translation templates for Cura

These are generated using 'make extract-messages'

Contributes to issue CURA-4113.

resources/i18n/fdmextruder.def.json.pot

@@ -5,9 +5,9 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 2.6\n"
+"Project-Id-Version: Cura 2.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2017-05-30 15:32+0000\n"
+"POT-Creation-Date: 2017-08-02 16:53+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: TEAM\n"
@@ -38,6 +38,16 @@ msgctxt "extruder_nr description"
 msgid "The extruder train used for printing. This is used in multi-extrusion."
 msgstr ""
 
+#: fdmextruder.def.json
+msgctxt "machine_nozzle_id label"
+msgid "Nozzle ID"
+msgstr ""
+
+#: fdmextruder.def.json
+msgctxt "machine_nozzle_id description"
+msgid "The nozzle ID for an extruder train, such as \"AA 0.4\" and \"BB 0.8\"."
+msgstr ""
+
 #: fdmextruder.def.json
 msgctxt "machine_nozzle_size label"
 msgid "Nozzle Diameter"

resources/i18n/fdmprinter.def.json.pot

@@ -5,9 +5,9 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 2.6\n"
+"Project-Id-Version: Cura 2.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2017-05-30 15:32+0000\n"
+"POT-Creation-Date: 2017-08-02 16:53+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: TEAM\n"
@@ -40,7 +40,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_show_variants label"
-msgid "Show machine variants"
+msgid "Show Machine Variants"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -86,7 +86,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_bed_temp_wait label"
-msgid "Wait for build plate heatup"
+msgid "Wait for Build Plate Heatup"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -98,7 +98,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_print_temp_wait label"
-msgid "Wait for nozzle heatup"
+msgid "Wait for Nozzle Heatup"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -108,7 +108,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_print_temp_prepend label"
-msgid "Include material temperatures"
+msgid "Include Material Temperatures"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -121,7 +121,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_bed_temp_prepend label"
-msgid "Include build plate temperature"
+msgid "Include Build Plate Temperature"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -134,7 +134,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_width label"
-msgid "Machine width"
+msgid "Machine Width"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -144,7 +144,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_depth label"
-msgid "Machine depth"
+msgid "Machine Depth"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -154,7 +154,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_shape label"
-msgid "Build plate shape"
+msgid "Build Plate Shape"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -175,7 +175,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_height label"
-msgid "Machine height"
+msgid "Machine Height"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -185,7 +185,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_heated_bed label"
-msgid "Has heated build plate"
+msgid "Has Heated Build Plate"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -195,7 +195,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_center_is_zero label"
-msgid "Is center origin"
+msgid "Is Center Origin"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -336,12 +336,17 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_gcode_flavor option RepRap (Marlin/Sprinter)"
-msgid "RepRap (Marlin/Sprinter)"
+msgid "Marlin"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "machine_gcode_flavor option RepRap (Volumatric)"
-msgid "RepRap (Volumetric)"
+msgctxt "machine_gcode_flavor option RepRap (Volumetric)"
+msgid "Marlin (Volumetric)"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_gcode_flavor option RepRap (RepRap)"
+msgid "RepRap"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -426,6 +431,16 @@ msgid ""
 "and Y axes)."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "machine_nozzle_id label"
+msgid "Nozzle ID"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_nozzle_id description"
+msgid "The nozzle ID for an extruder train, such as \"AA 0.4\" and \"BB 0.8\"."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "machine_nozzle_size label"
 msgid "Nozzle Diameter"
@@ -684,6 +699,16 @@ msgid ""
 "Width of a single wall line for all wall lines except the outermost one."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "roofing_line_width label"
+msgid "Top Surface Skin Line Width"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_line_width description"
+msgid "Width of a single line of the areas at the top of the print."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skin_line_width label"
 msgid "Top/Bottom Line Width"
@@ -764,6 +789,18 @@ msgctxt "prime_tower_line_width description"
 msgid "Width of a single prime tower line."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "initial_layer_line_width_factor label"
+msgid "Initial Layer Line Width"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "initial_layer_line_width_factor description"
+msgid ""
+"Multiplier of the line width on the first layer. Increasing this could "
+"improve bed adhesion."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "shell label"
 msgid "Shell"
@@ -774,6 +811,42 @@ msgctxt "shell description"
 msgid "Shell"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "wall_extruder_nr label"
+msgid "Wall Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_extruder_nr description"
+msgid ""
+"The extruder train used for printing the walls. This is used in multi-"
+"extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_0_extruder_nr label"
+msgid "Outer Wall Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_0_extruder_nr description"
+msgid ""
+"The extruder train used for printing the outer wall. This is used in multi-"
+"extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_x_extruder_nr label"
+msgid "Inner Walls Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_x_extruder_nr description"
+msgid ""
+"The extruder train used for printing the inner walls. This is used in multi-"
+"extrusion."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "wall_thickness label"
 msgid "Wall Thickness"
@@ -782,8 +855,8 @@ msgstr ""
 #: fdmprinter.def.json
 msgctxt "wall_thickness description"
 msgid ""
-"The thickness of the outside walls in the horizontal direction. This value "
-"divided by the wall line width defines the number of walls."
+"The thickness of the walls in the horizontal direction. This value divided "
+"by the wall line width defines the number of walls."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -810,6 +883,83 @@ msgid ""
 "better."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid ""
+"The extruder train used for printing the top most skin. This is used in "
+"multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid ""
+"The number of top most skin layers. Usually only one top most layer is "
+"sufficient to generate higher quality top surfaces."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_pattern label"
+msgid "Top Surface Skin Pattern"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_pattern description"
+msgid "The pattern of the top most layers."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_pattern option lines"
+msgid "Lines"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_pattern option concentric"
+msgid "Concentric"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_pattern option zigzag"
+msgid "Zig Zag"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_angles label"
+msgid "Top Surface Skin Line Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_angles description"
+msgid ""
+"A list of integer line directions to use when the top surface skin layers "
+"use the lines or zig zag pattern. Elements from the list are used "
+"sequentially as the layers progress and when the end of the list is reached, "
+"it starts at the beginning again. The list items are separated by commas and "
+"the whole list is contained in square brackets. Default is an empty list "
+"which means use the traditional default angles (45 and 135 degrees)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid ""
+"The extruder train used for printing the top and bottom skin. This is used "
+"in multi-extrusion."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "top_bottom_thickness label"
 msgid "Top/Bottom Thickness"
@@ -1032,6 +1182,18 @@ msgctxt "fill_perimeter_gaps option everywhere"
 msgid "Everywhere"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "fill_outline_gaps description"
+msgid ""
+"Print pieces of the model which are horizontally thinner than the nozzle "
+"size."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
 msgid "Horizontal Expansion"
@@ -1045,6 +1207,19 @@ msgid ""
 "holes."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "xy_offset_layer_0 label"
+msgid "Initial Layer Horizontal Expansion"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "xy_offset_layer_0 description"
+msgid ""
+"Amount of offset applied to all polygons in the first layer. A negative "
+"value can compensate for squishing of the first layer known as \"elephant's "
+"foot\"."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_type label"
 msgid "Z Seam Alignment"
@@ -1099,6 +1274,19 @@ msgid ""
 "layer."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "z_seam_relative label"
+msgid "Z Seam Relative"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "z_seam_relative description"
+msgid ""
+"When enabled, the z seam coordinates are relative to each part's centre. "
+"When disabled, the coordinates define an absolute position on the build "
+"plate."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "Ignore Small Z Gaps"
@@ -1122,6 +1310,17 @@ msgctxt "infill description"
 msgid "Infill"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "infill_extruder_nr label"
+msgid "Infill Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "infill_extruder_nr description"
+msgid ""
+"The extruder train used for printing infill. This is used in multi-extrusion."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "infill_sparse_density label"
 msgid "Infill Density"
@@ -1220,68 +1419,6 @@ msgid ""
 "lines and zig zag patterns and 45 degrees for all other patterns)."
 msgstr ""
 
-#: fdmprinter.def.json
-msgctxt "spaghetti_infill_enabled label"
-msgid "Spaghetti Infill"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "spaghetti_infill_enabled description"
-msgid ""
-"Print the infill every so often, so that the filament will curl up "
-"chaotically inside the object. This reduces print time, but the behaviour is "
-"rather unpredictable."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "spaghetti_max_infill_angle label"
-msgid "Spaghetti Maximum Infill Angle"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "spaghetti_max_infill_angle description"
-msgid ""
-"The maximum angle w.r.t. the Z axis of the inside of the print for areas "
-"which are to be filled with spaghetti infill afterwards. Lowering this value "
-"causes more angled parts in your model to be filled on each layer."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "spaghetti_max_height label"
-msgid "Spaghetti Infill Maximum Height"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "spaghetti_max_height description"
-msgid ""
-"The maximum height of inside space which can be combined and filled from the "
-"top."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "spaghetti_inset label"
-msgid "Spaghetti Inset"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "spaghetti_inset description"
-msgid ""
-"The offset from the walls from where the spaghetti infill will be printed."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "spaghetti_flow label"
-msgid "Spaghetti Flow"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "spaghetti_flow description"
-msgid ""
-"Adjusts the density of the spaghetti infill. Note that the Infill Density "
-"only controls the line spacing of the filling pattern, not the amount of "
-"extrusion for spaghetti infill."
-msgstr ""
-
 #: fdmprinter.def.json
 msgctxt "sub_div_rad_add label"
 msgid "Cubic Subdivision Shell"
@@ -1328,8 +1465,10 @@ msgstr ""
 #: fdmprinter.def.json
 msgctxt "skin_overlap description"
 msgid ""
-"The amount of overlap between the skin and the walls. A slight overlap "
-"allows the walls to connect firmly to the skin."
+"The amount of overlap between the skin and the walls as a percentage of the "
+"line width. A slight overlap allows the walls to connect firmly to the skin. "
+"This is a percentage of the average line widths of the skin lines and the "
+"innermost wall."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -1890,6 +2029,16 @@ msgid ""
 "this in between the outer wall speed and the infill speed."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "speed_roofing label"
+msgid "Top Surface Skin Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "speed_roofing description"
+msgid "The speed at which top surface skin layers are printed."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "speed_topbottom label"
 msgid "Top/Bottom Speed"
@@ -1900,6 +2049,16 @@ msgctxt "speed_topbottom description"
 msgid "The speed at which top/bottom layers are printed."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "speed_ironing label"
+msgid "Ironing Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "speed_ironing description"
+msgid "The speed at which to pass over the top surface."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "speed_support label"
 msgid "Support Speed"
@@ -2147,6 +2306,16 @@ msgctxt "acceleration_wall_x description"
 msgid "The acceleration with which all inner walls are printed."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "acceleration_roofing label"
+msgid "Top Surface Skin Acceleration"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "acceleration_roofing description"
+msgid "The acceleration with which top surface skin layers are printed."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "acceleration_topbottom label"
 msgid "Top/Bottom Acceleration"
@@ -2157,6 +2326,16 @@ msgctxt "acceleration_topbottom description"
 msgid "The acceleration with which top/bottom layers are printed."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "acceleration_ironing label"
+msgid "Ironing Acceleration"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "acceleration_ironing description"
+msgid "The acceleration with which ironing is performed."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "acceleration_support label"
 msgid "Support Acceleration"
@@ -2344,6 +2523,18 @@ msgid ""
 "printed."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "jerk_roofing label"
+msgid "Top Surface Skin Jerk"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "jerk_roofing description"
+msgid ""
+"The maximum instantaneous velocity change with which top surface skin layers "
+"are printed."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "jerk_topbottom label"
 msgid "Top/Bottom Jerk"
@@ -2356,6 +2547,16 @@ msgid ""
 "printed."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "jerk_ironing label"
+msgid "Ironing Jerk"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "jerk_ironing description"
+msgid "The maximum instantaneous velocity change while performing ironing."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "jerk_support label"
 msgid "Support Jerk"
@@ -2978,6 +3179,29 @@ msgid ""
 "structure."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "support_skip_some_zags label"
+msgid "Skip Some ZigZags Connections"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_skip_some_zags description"
+msgid ""
+"Skip some ZigZags connections to make the support structure easier to break."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_zag_skip_count label"
+msgid "ZigZag Connection Skip Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_zag_skip_count description"
+msgid ""
+"Skip one in every N connection lines to make the support structure easier to "
+"break."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "support_infill_rate label"
 msgid "Support Density"
@@ -3132,6 +3356,43 @@ msgid ""
 "values can smooth out the support areas and result in more sturdy support."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "support_infill_sparse_thickness label"
+msgid "Support Infill Layer Thickness"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_infill_sparse_thickness description"
+msgid ""
+"The thickness per layer of support infill material. This value should always "
+"be a multiple of the layer height and is otherwise rounded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "gradual_support_infill_steps label"
+msgid "Gradual Support Infill Steps"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "gradual_support_infill_steps description"
+msgid ""
+"Number of times to reduce the support infill density by half when getting "
+"further below top surfaces. Areas which are closer to top surfaces get a "
+"higher density, up to the Support Infill Density."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "gradual_support_infill_step_height label"
+msgid "Gradual Support Infill Step Height"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "gradual_support_infill_step_height description"
+msgid ""
+"The height of support infill of a given density before switching to half the "
+"density."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "support_interface_enable label"
 msgid "Enable Support Interface"
@@ -4060,6 +4321,19 @@ msgid ""
 "the oozed material causes least harm to the surface quality of your print."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "prime_tower_purge_volume label"
+msgid "Prime Tower Purge Volume"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "prime_tower_purge_volume description"
+msgid ""
+"Amount of filament to be purged when wiping on the prime tower. Purging is "
+"useful for compensating the filament lost by oozing during inactivity of the "
+"nozzle."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "ooze_shield_enabled label"
 msgid "Enable Ooze Shield"
@@ -4581,6 +4855,92 @@ msgid ""
 "directions."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "spaghetti_infill_enabled label"
+msgid "Spaghetti Infill"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_infill_enabled description"
+msgid ""
+"Print the infill every so often, so that the filament will curl up "
+"chaotically inside the object. This reduces print time, but the behaviour is "
+"rather unpredictable."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_infill_stepped label"
+msgid "Spaghetti Infill Stepping"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_infill_stepped description"
+msgid ""
+"Whether to print spaghetti infill in steps or extrude all the infill "
+"filament at the end of the print."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_max_infill_angle label"
+msgid "Spaghetti Maximum Infill Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_max_infill_angle description"
+msgid ""
+"The maximum angle w.r.t. the Z axis of the inside of the print for areas "
+"which are to be filled with spaghetti infill afterwards. Lowering this value "
+"causes more angled parts in your model to be filled on each layer."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_max_height label"
+msgid "Spaghetti Infill Maximum Height"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_max_height description"
+msgid ""
+"The maximum height of inside space which can be combined and filled from the "
+"top."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_inset label"
+msgid "Spaghetti Inset"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_inset description"
+msgid ""
+"The offset from the walls from where the spaghetti infill will be printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_flow label"
+msgid "Spaghetti Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_flow description"
+msgid ""
+"Adjusts the density of the spaghetti infill. Note that the Infill Density "
+"only controls the line spacing of the filling pattern, not the amount of "
+"extrusion for spaghetti infill."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_infill_extra_volume label"
+msgid "Spaghetti Infill Extra Volume"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_infill_extra_volume description"
+msgid ""
+"A correction term to adjust the total volume being extruded each time when "
+"filling spaghetti."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "support_conical_enabled label"
 msgid "Enable Conical Support"
@@ -4994,6 +5354,75 @@ msgid ""
 "applies to Wire Printing."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "ironing_enabled label"
+msgid "Enable Ironing"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_enabled description"
+msgid ""
+"Go over the top surface one additional time, but without extruding material. "
+"This is meant to melt the plastic on top further, creating a smoother "
+"surface."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_pattern label"
+msgid "Ironing Pattern"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_pattern description"
+msgid "The pattern to use for ironing top surfaces."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_pattern option concentric"
+msgid "Concentric"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_pattern option zigzag"
+msgid "Zig Zag"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_line_spacing label"
+msgid "Ironing Line Spacing"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_line_spacing description"
+msgid "The distance between the lines of ironing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_flow label"
+msgid "Ironing Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_flow description"
+msgid ""
+"The amount of material, relative to a normal skin line, to extrude during "
+"ironing. Keeping the nozzle filled helps filling some of the crevices of the "
+"top surface, but too much results in overextrusion and blips on the side of "
+"the surface."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_inset label"
+msgid "Ironing Inset"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_inset description"
+msgid ""
+"A distance to keep from the edges of the model. Ironing all the way to the "
+"edge of the mesh may result in a jagged edge on your print."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"