remove some useless property and change platform mesh name

resources/definitions/lotmaxx_sc60.def.json

@@ -17,7 +17,7 @@
         "gantry_height": { "value": 29 },
         "machine_heated_bed": {"value": true},
         "machine_start_gcode":{
-          "default_value":"M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"
+          "default_value":"G28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"
         },
         "machine_end_gcode":{
           "default_value":"G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n"
@@ -27,7 +27,6 @@
         "acceleration_travel_layer_0":{"value":1000.0},
         "expand_skins_expand_distance":{"value":0.8},
         "fill_outline_gaps":{"default_value":false},
-        "infill_pattern":{"default_value":"lines"},
         "infill_sparse_density":{"value":15},
         "meshfix_maximum_resolution":{"value":0.05},
         "optimize_wall_printing_order":{"value":true},
@@ -54,11 +53,6 @@
         "prime_tower_enable":{"value":true},
         "prime_tower_position_x":{"value": 50},
         "prime_tower_position_y":{"value": 50},
-        "material_print_temperature": { "default_value": 200 },
-        "default_material_print_temperature":{"default_value":200},
-        "material_print_temperature":{"default_value":200},
-        "material_final_print_temperature":{"default_value":200},
-        "material_initial_print_temperature":{"default_value":200},
         "prime_tower_min_volume":{"value": 30},
         "switch_extruder_retraction_amount": {"value": 100},
         "switch_extruder_retraction_speeds": {"value": 60}
@@ -67,7 +61,7 @@
         "visible": true,
         "author": "lotmaxx.com",
         "manufacturer": "Lotmaxx",
-        "platform": "lotmaxx_sc_10_20_platform.stl",
+        "platform": "lotmaxx_sc_10_20_platform.3mf",
         "machine_extruder_trains": {
             "0": "lotmaxx_sc60_extruder_0",
             "1": "lotmaxx_sc60_extruder_right"
@@ -75,4 +69,4 @@
         "has_materials": true,
         "preferred_quality_type": "normal"
     }
-}
+}

resources/extruders/lotmaxx_sc60_extruder_right.def.json

@@ -1,5 +1,4 @@
 {
-    "id":"lotmaxx_sc60_extruder_right",
     "version": 2,
     "name": "Extruder 2",
     "inherits": "fdmextruder",