Added BIQU machine base files as well as BIQU B1 machine files. (#8276)

* Added BIQU machine base files as well as BIQU B1 machine files.

* Fixed a variants settings version error.

* Updated base def by removing excluded materials and changing the pref to pla175

* Fixed the machine name value which should only take a default value and not also a value.

* Increased the max extruder feedrate to allow the default retraction speed.

* Removed comments from the quality profiles. Removed author from variants. Adjusted materials in quality profiles to refer to the 175 profiles directly.

* Enabled coasting by default in the B1 profile and increased the width of infill for the base profile.

* Updated all quality and variants configs to use settings version 16 in anticipation of release 4.8

* Final tweaks to B1 start gcode

* Added an ABL version of the B1 with tweaked start codes.

resources/definitions/biqu_b1.def.json

@@ -0,0 +1,57 @@
+{
+    "name": "BIQU B1",
+    "version": 2,
+    "inherits": "biqu_base",
+    "metadata": {
+        "quality_definition": "biqu_base",
+        "visible": true,
+        "has_machine_materials": true,
+        "platform": "BIQU_SSS.stl",
+        "platform_offset": [
+            0,
+            -7.4,
+            5
+        ]
+    },
+    "overrides": {
+        "coasting_enable": { "default_value": true },
+        "coasting_enable": { "value": true },
+        "retraction_amount": { "default_value": 7 },
+        "retraction_amount": { "value": 7 },
+        "retraction_speed": { "default_value": 70 },
+        "retraction_speed": { "value": 70 },
+        "support_enable": { "default_value": true },
+        "support_enable": { "value": true },
+        "support_structure": { "default_value": "normal" },
+        "support_structure": { "value": "normal" },
+        "support_type": { "default_value": "buildplate" },
+        "support_type": { "value": "buildplate" },
+        "support_angle": { "default_value": 45 },
+        "support_angle": { "value": 45 },
+        "support_infill_rate": { "default_value": 15 },
+        "support_infill_rate": { "value": 15 },
+        "infill_overlap_mm": { "default_value": 0.06 },
+        "infill_overlap_mm": { "value": 0.06 },
+        "speed_print": { "default_value": 60 },
+        "speed_print": { "value": 60 },
+        "machine_name": { "default_value": "BIQU B1" },
+        "machine_width": { "default_value": 235 },
+        "machine_width": { "value": 235 },
+        "machine_depth": { "default_value": 235 },
+        "machine_depth": { "value": 235 },
+        "machine_height": { "default_value": 270 },
+        "machine_height": { "value": 270 },
+        "machine_head_with_fans_polygon": { "default_value": [
+                [-33, 35],
+                [-33, -23],
+                [33, -23],
+                [33, 35]
+            ]
+        },
+        "machine_start_gcode": {
+            "default_value": "                                 ; BIQU B1 Start G-code\nM117 Getting the bed up to temp!\nM140 S{material_bed_temperature_layer_0}      ; Set Heat Bed temperature\nM190 S{material_bed_temperature_layer_0}      ; Wait for Heat Bed temperature\nM117 Getting the extruder up to temp!\nM104 S{material_print_temperature_layer_0}    ; Set Extruder temperature\nG92 E0                           ; Reset Extruder\nM117 Homing axes\nG28                              ; Home all axes\nM109 S{material_print_temperature_layer_0}    ; Wait for Extruder temperature\nG1 Z2.0 F3000                    ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y20 Z0.3 F5000.0         ; Move to start position\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15  ; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0      ; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30     ; Draw the second line\nG92 E0                           ; Reset Extruder\nM117 Lets make\nG1 Z2.0 F3000                    ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0           ; Move over to prevent blob squish"
+        },
+
+        "gantry_height": { "value": 27.5 }
+    }
+}

resources/definitions/biqu_b1_abl.def.json

@@ -0,0 +1,57 @@
+{
+    "name": "BIQU B1 ABL",
+    "version": 2,
+    "inherits": "biqu_base",
+    "metadata": {
+        "quality_definition": "biqu_base",
+        "visible": true,
+        "has_machine_materials": true,
+        "platform": "BIQU_SSS.stl",
+        "platform_offset": [
+            0,
+            -7.4,
+            5
+        ]
+    },
+    "overrides": {
+        "coasting_enable": { "default_value": true },
+        "coasting_enable": { "value": true },
+        "retraction_amount": { "default_value": 7 },
+        "retraction_amount": { "value": 7 },
+        "retraction_speed": { "default_value": 70 },
+        "retraction_speed": { "value": 70 },
+        "support_enable": { "default_value": true },
+        "support_enable": { "value": true },
+        "support_structure": { "default_value": "normal" },
+        "support_structure": { "value": "normal" },
+        "support_type": { "default_value": "buildplate" },
+        "support_type": { "value": "buildplate" },
+        "support_angle": { "default_value": 45 },
+        "support_angle": { "value": 45 },
+        "support_infill_rate": { "default_value": 15 },
+        "support_infill_rate": { "value": 15 },
+        "infill_overlap_mm": { "default_value": 0.06 },
+        "infill_overlap_mm": { "value": 0.06 },
+        "speed_print": { "default_value": 60 },
+        "speed_print": { "value": 60 },
+        "machine_name": { "default_value": "BIQU B1 ABL" },
+        "machine_width": { "default_value": 235 },
+        "machine_width": { "value": 235 },
+        "machine_depth": { "default_value": 235 },
+        "machine_depth": { "value": 235 },
+        "machine_height": { "default_value": 270 },
+        "machine_height": { "value": 270 },
+        "machine_head_with_fans_polygon": { "default_value": [
+                [-33, 35],
+                [-33, -23],
+                [33, -23],
+                [33, 35]
+            ]
+        },
+        "machine_start_gcode": {
+            "default_value": "; BIQU B1 Start G-code\nM117 Getting the bed up to temp!\nM140 S{material_bed_temperature_layer_0}      ; Set Heat Bed temperature\nM190 S{material_bed_temperature_layer_0}      ; Wait for Heat Bed temperature\nM117 Pre-heating the extruder\nM104 S160                                     ; Set Extruder temperature\nM117 Homing axes\nG28                              ; Home all axes\nM117 ABL Probing\nG29\nM117 Getting the extruder up to temp\nM104 S{material_print_temperature_layer_0}    ; Set Extruder temperature\nM109 S{material_print_temperature_layer_0}    ; Wait for Extruder temperature\nG92 E0                                        ; Reset Extruder\nG1 Z2.0 F3000                    ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y20 Z0.3 F5000.0         ; Move to start position\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15  ; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0      ; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30     ; Draw the second line\nG92 E0                           ; Reset Extruder\nM117 Lets make\nG1 Z2.0 F3000                    ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0           ; Move over to prevent blob squish"
+        },
+
+        "gantry_height": { "value": 27.5 }
+    }
+}

resources/definitions/biqu_base.def.json

@@ -0,0 +1,169 @@
+{
+    "name": "Biqu Base Printer",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": false,
+        "author": "Luke Harrison",
+        "manufacturer": "BIQU",
+        "file_formats": "text/x-gcode",
+        "first_start_actions": ["MachineSettingsAction"],
+
+    	"machine_extruder_trains": {
+        	"0": "biqu_base_extruder_0"
+    	},
+
+        "has_materials": true,
+        "has_variants": true,
+        "has_machine_quality": true,
+        "variants_name": "Nozzle Diameter",
+
+        "preferred_variant_name": "0.4mm Nozzle",
+        "preferred_quality_type": "standard",
+        "preferred_material": "generic_pla_175"
+    },
+    "overrides": {
+        "machine_name": { "default_value": "BIQU Base Printer" },
+        "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
+        "machine_end_gcode": { "default_value": "                               ;BIQU Default End Gcode\nG91                            ;Relative positioning\nG1 E-2 F2700                   ;Retract a bit\nG1 E-2 Z0.2 F2400              ;Retract a bit more and raise Z\nG1 X5 Y5 F3000                 ;Wipe out\nG1 Z10                         ;Raise Z by 10mm\nG90                            ;Return to absolute positionning\n\nG1 X0 Y{machine_depth}         ;TaDaaaa\nM106 S0                        ;Turn-off fan\nM104 S0                        ;Turn-off hotend\nM140 S0                        ;Turn-off bed\n\nM84 X Y E                      ;Disable all steppers but Z\n" },
+
+        "machine_max_feedrate_x": { "value": 500 },
+        "machine_max_feedrate_y": { "value": 500 },
+        "machine_max_feedrate_z": { "value": 10 },
+        "machine_max_feedrate_e": { "value": 75 },
+
+        "machine_max_acceleration_x": { "value": 500 },
+        "machine_max_acceleration_y": { "value": 500 },
+        "machine_max_acceleration_z": { "value": 100 },
+        "machine_max_acceleration_e": { "value": 5000 },
+        "machine_acceleration": { "value": 500 },
+
+        "machine_max_jerk_xy": { "value": 10 },
+        "machine_max_jerk_z": { "value": 0.4 },
+        "machine_max_jerk_e": { "value": 5 },
+
+        "machine_heated_bed": { "default_value": true },
+
+        "material_diameter": { "default_value": 1.75 },
+
+        "acceleration_print": { "value": 500 },
+        "acceleration_travel": { "value": 500 },
+        "acceleration_travel_layer_0": { "value": "acceleration_travel" },
+        "acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
+
+        "jerk_print": { "value": 8 },
+        "jerk_travel": { "value": "jerk_print" },
+        "jerk_travel_layer_0": { "value": "jerk_travel" },
+
+        "acceleration_enabled": { "value": false },
+        "jerk_enabled": { "value": false },
+
+        "speed_print": { "value": 50.0 } ,
+        "speed_infill": { "value": "speed_print" },
+        "speed_wall": { "value": "speed_print / 2" },
+        "speed_wall_0": { "value": "speed_wall" },
+        "speed_wall_x": { "value": "speed_wall" },
+        "speed_topbottom": { "value": "speed_print / 2" },
+        "speed_roofing": { "value": "speed_topbottom" },
+        "speed_travel": { "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" },
+        "speed_layer_0": { "value": 20.0 },
+        "speed_print_layer_0": { "value": "speed_layer_0" },
+        "speed_travel_layer_0": { "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
+        "speed_prime_tower": { "value": "speed_topbottom" },
+        "speed_support": { "value": "speed_wall_0" },
+        "speed_support_interface": { "value": "speed_topbottom" },
+        "speed_z_hop": { "value": 5 },
+
+        "skirt_brim_speed": { "value": "speed_layer_0" },
+
+        "line_width": { "value": "machine_nozzle_size" },
+
+        "optimize_wall_printing_order": { "value": "True" },
+
+        "material_initial_print_temperature": { "value": "material_print_temperature" },
+        "material_final_print_temperature": { "value": "material_print_temperature" },
+        "material_flow": { "value": 100 },
+        "travel_compensate_overlapping_walls_0_enabled": { "value": "False" },
+
+        "z_seam_type": { "value": "'back'" },
+        "z_seam_corner": { "value": "'z_seam_corner_weighted'" },
+
+        "infill_line_width": { "default_value": "line_width * 1.2" },
+        "infill_line_width": { "value": "line_width * 1.2" },
+        "infill_sparse_density": { "value": "20" },
+        "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },
+        "infill_before_walls": { "value": false },
+        "infill_overlap": { "value": 30.0 },
+        "skin_overlap": { "value": 10.0 },
+        "infill_wipe_dist": { "value": 0.0 },
+        "wall_0_wipe_dist": { "value": 0.0 },
+
+        "fill_perimeter_gaps": { "value": "'everywhere'" },
+        "fill_outline_gaps": { "value": false },
+        "filter_out_tiny_gaps": { "value": false },
+
+        "retraction_speed": {
+            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
+            "maximum_value": 200
+        },
+        "retraction_retract_speed": {
+            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
+            "maximum_value": 200
+        },
+        "retraction_prime_speed": {
+            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
+            "maximum_value": 200
+        },
+
+        "retraction_hop_enabled": { "value": "False" },
+        "retraction_hop": { "value": 0.2 },
+        "retraction_combing": { "value": "'off' if retraction_hop_enabled else 'noskin'" },
+        "retraction_combing_max_distance": { "value": 30 },
+        "travel_avoid_other_parts": { "value": true },
+        "travel_avoid_supports": { "value": true },
+        "travel_retract_before_outer_wall": { "value": true },
+
+        "retraction_enable": { "value": true },
+        "retraction_count_max": { "value": 100 },
+        "retraction_extrusion_window": { "value": 10 },
+        "retraction_min_travel": { "value": 1.5 },
+
+        "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
+        "cool_fan_enabled": { "value": true },
+        "cool_min_layer_time": { "value": 10 },
+
+        "adhesion_type": { "value": "'skirt'" },
+        "brim_replaces_support": { "value": false },
+        "skirt_gap": { "value": 10.0 },
+        "skirt_line_count": { "value": 3 },
+
+        "adaptive_layer_height_variation": { "value": 0.04 },
+        "adaptive_layer_height_variation_step": { "value": 0.04 },
+
+        "meshfix_maximum_resolution": { "value": "0.05" },
+        "meshfix_maximum_travel_resolution": { "value": "meshfix_maximum_resolution" },
+
+        "support_angle": { "value": "math.floor(math.degrees(math.atan(line_width/2.0/layer_height)))" },
+        "support_pattern": { "value": "'zigzag'" },
+        "support_infill_rate": { "value": "0 if support_tree_enable else 20" },
+        "support_use_towers": { "value": false },
+        "support_xy_distance": { "value": "wall_line_width_0 * 2" },
+        "support_xy_distance_overhang": { "value": "wall_line_width_0" },
+        "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
+        "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
+        "support_wall_count": { "value": 1 },
+        "support_brim_enable": { "value": true },
+        "support_brim_width": { "value": 4 },
+
+        "support_interface_enable": { "value": true },
+        "support_interface_height": { "value": "layer_height * 4" },
+        "support_interface_density": { "value": 33.333 },
+        "support_interface_pattern": { "value": "'grid'" },
+        "support_interface_skip_height": { "value": 0.2 },
+        "minimum_support_area": { "value": 2 },
+        "minimum_interface_area": { "value": 10 },
+        "top_bottom_thickness": {"value":  "layer_height_0 + layer_height * 3" },
+        "wall_thickness": {"value": "line_width * 2" }
+
+    }
+}

resources/extruders/biqu_base_extruder_0.def.json

@@ -0,0 +1,15 @@
+{
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "biqu_base",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": { "default_value": 0 },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}

resources/quality/biqu/base/base_0.2_ABS_super.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Super Quality
+definition = biqu_base
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = super
+material = generic_abs_175
+variant = 0.2mm Nozzle
+
+[values]
+wall_thickness = =line_width*8

resources/quality/biqu/base/base_0.2_ABS_ultra.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = biqu_base
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = ultra
+material = generic_abs_175
+variant = 0.2mm Nozzle
+
+[values]
+wall_thickness = =line_width*8

resources/quality/biqu/base/base_0.2_PETG_super.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Super Quality
+definition = biqu_base
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = super
+material = generic_petg_175
+variant = 0.2mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*8

resources/quality/biqu/base/base_0.2_PETG_ultra.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = biqu_base
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = ultra
+material = generic_petg_175
+variant = 0.2mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*8

resources/quality/biqu/base/base_0.2_PLA_super.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Super Quality
+definition = biqu_base
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = super
+material = generic_pla_175
+variant = 0.2mm Nozzle
+
+[values]