set raft margin to default of 15mm

The raft margin is not a critical setting and for most profiles it resolves to 15mm currently, which is the default in fdmprinter. PP-243

resources/definitions/ultimaker3.def.json

@@ -116,7 +116,6 @@
         "raft_interface_line_spacing": { "value": "0.5" },
         "raft_interface_line_width": { "value": "0.5" },
         "raft_interface_thickness": { "value": "0.2" },
-        "raft_margin": { "value": "10" },
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },
         "retraction_hop": { "value": "2" },

resources/definitions/ultimaker_s3.def.json

@@ -107,7 +107,6 @@
         "raft_interface_line_width": { "value": "0.5" },
         "raft_interface_speed": { "value": "20" },
         "raft_interface_thickness": { "value": "0.2" },
-        "raft_margin": { "value": "10" },
         "raft_speed": { "value": "25" },
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },

resources/definitions/ultimaker_s5.def.json

@@ -108,7 +108,6 @@
         "raft_interface_line_width": { "value": "0.5" },
         "raft_interface_speed": { "value": "20" },
         "raft_interface_thickness": { "value": "0.2" },
-        "raft_margin": { "value": "10" },
         "raft_speed": { "value": "25" },
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },

resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg

@@ -25,7 +25,6 @@ raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.8
-raft_margin = 15
 raft_surface_line_width = 0.38
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25

resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg

@@ -25,7 +25,6 @@ raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.8
-raft_margin = 15
 raft_surface_line_width = 0.38
 speed_layer_0 = =math.ceil(speed_print * 15 / 35)
 speed_print = 35

resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg

@@ -26,7 +26,6 @@ raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
 raft_interface_line_width = 1.2
-raft_margin = 15
 raft_surface_line_width = 0.57
 raft_surface_thickness = 0.2
 speed_layer_0 = =round(speed_print * 30 / 50)

resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg

@@ -26,7 +26,6 @@ raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
 raft_interface_line_width = 1.2
-raft_margin = 15
 raft_surface_line_width = 0.57
 raft_surface_thickness = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 35)

resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg

@@ -24,7 +24,6 @@ raft_airgap = 0.37
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
 raft_interface_line_width = 1.6
-raft_margin = 15
 raft_surface_line_width = 0.7
 raft_surface_thickness = 0.2
 speed_layer_0 = =round(speed_print * 30 / 25)

resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg

@@ -24,7 +24,6 @@ raft_airgap = 0.37
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
 raft_interface_line_width = 1.6
-raft_margin = 15
 raft_surface_line_width = 0.7
 raft_surface_thickness = 0.2
 speed_layer_0 = =round(speed_print * 30 / 30)

resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg

@@ -24,7 +24,6 @@ raft_airgap = 0.15
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
 raft_interface_line_width = 0.5
-raft_margin = 15
 raft_surface_line_width = 0.2
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)