|
|
@@ -40,10 +40,10 @@
|
|
|
"default_value": "RepRap"
|
|
|
},
|
|
|
"machine_start_gcode": {
|
|
|
- "default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\n;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{print_temperature} ;Uncomment to add your own temperature line\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to max endstops\nG1 Z115.0 F{travel_speed} ;move th e platform up 20mm\nG28 Z0 ;move Z to max endstop\nG1 Z15.0 F{travel_speed} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{travel_speed}\nM301 H1 P26.38 I2.57 D67.78\n;Put printing message on LCD screen\nM117 Printing..."
|
|
|
+ "default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\n;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{print_temperature} ;Uncomment to add your own temperature line\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to max endstops\nG1 Z115.0 F{speed_travel} ;move th e platform up 20mm\nG28 Z0 ;move Z to max endstop\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nM301 H1 P26.38 I2.57 D67.78\n;Put printing message on LCD screen\nM117 Printing..."
|
|
|
},
|
|
|
"machine_end_gcode": {
|
|
|
- "default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG28 Z0\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}"
|
|
|
+ "default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG28 Z0\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}"
|
|
|
}
|
|
|
}
|
|
|
}
|
Ghostkeeper