Partial revert: Don't remove 'Print Thin Walls'.

It still makes sense, even in a libArachne/Variable Line Width sense.

CURA-7148

plugins/VersionUpgrade/VersionUpgrade49to50/VersionUpgrade49to50.py

@@ -10,8 +10,7 @@ _removed_settings = {
     "travel_compensate_overlapping_walls_enabled",
     "travel_compensate_overlapping_walls_0_enabled",
     "travel_compensate_overlapping_walls_x_enabled",
-    "fill_perimeter_gaps",
-    "fill_outline_gaps"
+    "fill_perimeter_gaps"
 }
 
 

resources/definitions/anet3d.def.json

@@ -86,6 +86,7 @@
         "infill_wipe_dist": { "value": 0 },
         "wall_0_wipe_dist": { "value": 0.2 },
 
+        "fill_outline_gaps": { "value": false },
         "filter_out_tiny_gaps": { "value": true },
 
         "retraction_speed": {

resources/definitions/artillery_base.def.json

@@ -191,6 +191,7 @@
         "infill_wipe_dist": { "value": 0.0 },
         "wall_0_wipe_dist": { "value": 0.0 },
 
+        "fill_outline_gaps": { "value": false },
         "filter_out_tiny_gaps": { "value": false },
 
         "retraction_speed": {

resources/definitions/atmat_signal_pro_base.def.json

@@ -258,6 +258,7 @@
         "layer_height_0":                               { "resolve": "max(0.2, min(extruderValues('layer_height')))" },
         "line_width":                                   { "value": "machine_nozzle_size * 1.125" },
         "wall_line_width":                              { "value": "machine_nozzle_size" },
+        "fill_outline_gaps":                            { "value": "True" },
         "meshfix_maximum_resolution":                   { "value": "0.01" },
         "meshfix_maximum_deviation":                    { "value": "layer_height / 2" },
         "infill_before_walls":                          { "value": "False" },

resources/definitions/biqu_base.def.json

@@ -95,6 +95,8 @@
         "skin_overlap": { "value": 10.0 },
         "infill_wipe_dist": { "value": 0.0 },
         "wall_0_wipe_dist": { "value": 0.0 },
+
+        "fill_outline_gaps": { "value": false },
         "filter_out_tiny_gaps": { "value": false },
 
         "retraction_speed": {

resources/definitions/blv_mgn_cube_base.def.json

@@ -45,6 +45,9 @@
     "machine_gcode_flavor": {
       "default_value": "RepRap (RepRap)"
     },
+    "fill_outline_gaps": {
+      "value": true
+    },
     "retraction_speed": {
       "default_value": 85,
       "maximum_value_warning": 130

resources/definitions/creality_base.def.json

@@ -195,6 +195,7 @@
         "infill_wipe_dist": { "value": 0.0 },
         "wall_0_wipe_dist": { "value": 0.0 },
 
+        "fill_outline_gaps": { "value": false },
         "filter_out_tiny_gaps": { "value": false },
 
         "retraction_speed": {

resources/definitions/fdmprinter.def.json

@@ -1385,7 +1385,7 @@
                     "maximum_value": "wall_line_width_0",
                     "type": "float",
                     "limit_to_extruder": "wall_0_extruder_nr",
-                    "enabled": true
+                    "enabled": "fill_outline_gaps"
                 },
                 "min_bead_width":
                 {
@@ -1398,7 +1398,7 @@
                     "maximum_value_warning": "wall_line_width_0",
                     "type": "float",
                     "limit_to_extruder": "wall_0_extruder_nr",
-                    "enabled": true
+                    "enabled": "fill_outline_gaps"
                 },
                 "xy_offset":
                 {

resources/definitions/flyingbear_base.def.json

@@ -173,6 +173,7 @@
         "top_bottom_thickness": { "value":  "layer_height_0 + layer_height * 3 if layer_height > 0.15 else 0.8" },
         "optimize_wall_printing_order": { "value": true },
         "filter_out_tiny_gaps": { "value": false },
+        "fill_outline_gaps": { "value": false },
         "z_seam_type": { "value": "'sharpest_corner'" },
         "z_seam_corner": { "value": "'z_seam_corner_weighted'" },
 

resources/definitions/hms434.def.json

@@ -92,6 +92,7 @@
         "outer_inset_first":         {"value": true },
         "alternate_extra_perimeter": {"value": false },
         "filter_out_tiny_gaps":      {"value": true },
+        "fill_outline_gaps":         {"value": true },
         "z_seam_type":               {"value": "'shortest'"},
         "z_seam_x":                  {"value": "300"},
         "z_seam_y":                  {"value": "325"},