Remove the wall section from quality

resources/quality/nps/nps_ABS_B.inst.cfg

@@ -11,11 +11,6 @@ weight = 0
 material = generic_abs
 
 [values]
-layer_height_0 = =round(0.67*machine_nozzle_size, 2)
-line_width = =machine_nozzle_size/machine_nozzle_size*0.4
-wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
-wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
-wall_0_wipe_dist = =machine_nozzle_size/2
 speed_print = 55
 speed_wall = =math.ceil(speed_print * 37/55)
 speed_wall_0 = =math.ceil(speed_wall * 33/37)

resources/quality/nps/nps_ABS_C.inst.cfg

@@ -11,11 +11,6 @@ weight = -1
 material = generic_abs
 
 [values]
-layer_height_0 = =round(0.75*machine_nozzle_size, 2)
-line_width = =machine_nozzle_size/machine_nozzle_size*0.4
-wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
-wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
-wall_0_wipe_dist = =machine_nozzle_size/2
 speed_print = 60
 speed_wall = =math.ceil(speed_print * 40/60)
 speed_wall_0 = =math.ceil(speed_wall * 35/40)

resources/quality/nps/nps_PC_A.inst.cfg

@@ -11,11 +11,6 @@ weight = 1
 material = generic_pc
 
 [values]
-layer_height_0 = =round(0.5*machine_nozzle_size, 2)
-line_width = =machine_nozzle_size/machine_nozzle_size*0.4
-wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
-wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
-wall_0_wipe_dist = =machine_nozzle_size/2
 speed_print = 35
 speed_wall = =math.ceil(speed_print * 35/50)
 speed_wall_0 = =math.ceil(speed_wall * 30/35)

resources/quality/nps/nps_PC_B.inst.cfg

@@ -11,11 +11,6 @@ weight = 0
 material = generic_pc
 
 [values]
-layer_height_0 = =round(0.67*machine_nozzle_size, 2)
-line_width = =machine_nozzle_size/machine_nozzle_size*0.4
-wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
-wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
-wall_0_wipe_dist = =machine_nozzle_size/2
 speed_print = 35
 speed_wall = =math.ceil(speed_print * 37/55)
 speed_wall_0 = =math.ceil(speed_wall * 33/37)

resources/quality/nps/nps_PC_C.inst.cfg

@@ -11,11 +11,6 @@ weight = -1
 material = generic_pc
 
 [values]
-layer_height_0 = =round(0.75*machine_nozzle_size, 2)
-line_width = =machine_nozzle_size/machine_nozzle_size*0.4
-wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
-wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
-wall_0_wipe_dist = =machine_nozzle_size/2
 speed_print = 35
 speed_wall = =math.ceil(speed_print * 40/60)
 speed_wall_0 = =math.ceil(speed_wall * 35/40)

resources/quality/nps/nps_PETG_A.inst.cfg

@@ -11,11 +11,6 @@ weight = 1
 material = generic_petg
 
 [values]
-layer_height_0 = =round(0.5*machine_nozzle_size, 2)
-line_width = =machine_nozzle_size/machine_nozzle_size*0.4
-wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
-wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
-wall_0_wipe_dist = =machine_nozzle_size/2
 speed_print = 50
 speed_wall = =math.ceil(speed_print * 35/50)
 speed_wall_0 = =math.ceil(speed_wall * 30/35)

resources/quality/nps/nps_PETG_B.inst.cfg

@@ -11,11 +11,6 @@ weight = 0
 material = generic_petg
 
 [values]
-layer_height_0 = =round(0.67*machine_nozzle_size, 2)
-line_width = =machine_nozzle_size/machine_nozzle_size*0.4
-wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
-wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
-wall_0_wipe_dist = =machine_nozzle_size/2
 speed_print = 55
 speed_wall = =math.ceil(speed_print * 37/55)
 speed_wall_0 = =math.ceil(speed_wall * 33/37)

resources/quality/nps/nps_PETG_C.inst.cfg

@@ -11,11 +11,6 @@ weight = -1
 material = generic_petg
 
 [values]
-layer_height_0 = =round(0.75*machine_nozzle_size, 2)
-line_width = =machine_nozzle_size/machine_nozzle_size*0.4
-wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
-wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
-wall_0_wipe_dist = =machine_nozzle_size/2
 speed_print = 60
 speed_wall = =math.ceil(speed_print * 40/60)
 speed_wall_0 = =math.ceil(speed_wall * 35/40)

resources/quality/nps/nps_PLA_A.inst.cfg

@@ -11,11 +11,6 @@ weight = 1
 material = generic_pla
 
 [values]
-layer_height_0 = =round(0.5*machine_nozzle_size, 2)
-line_width = =machine_nozzle_size/machine_nozzle_size*0.4
-wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
-wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
-wall_0_wipe_dist = =machine_nozzle_size/2
 speed_print = 50
 speed_wall = =math.ceil(speed_print * 35/50)
 speed_wall_0 = =math.ceil(speed_wall * 30/35)

resources/quality/nps/nps_PLA_B.inst.cfg

@@ -11,11 +11,6 @@ weight = 0
 material = generic_pla
 
 [values]
-layer_height_0 = =round(0.67*machine_nozzle_size, 2)
-line_width = =machine_nozzle_size/machine_nozzle_size*0.4
-wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
-wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
-wall_0_wipe_dist = =machine_nozzle_size/2
 speed_print = 55
 speed_wall = =math.ceil(speed_print * 37/55)
 speed_wall_0 = =math.ceil(speed_wall * 33/37)
@@ -33,8 +28,8 @@ support_angle = 60
 material_print_temperature = =215
 material_print_temperature_layer_0 = =220
 material_bed_temperature = 60
-material_flow = 95
-retraction_extra_prime_amount = 0.1
+material_flow = 100
+retraction_extra_prime_amount = 0.0
 retraction_min_travel = =3*line_width
 retraction_hop_only_when_collides = True
 skin_overlap = 15