Remove filter_out_tiny_gaps from prepackaged profiles too

This setting was removed. The version upgrade would remove it (but that's not applied to pre-packaged profiles).

Contributes to issue CURA-8466.

resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg

@@ -21,7 +21,6 @@ wall_0_wipe_dist = 0.2
 top_bottom_thickness = 0.8
 top_bottom_pattern = lines
 optimize_wall_printing_order = True
-filter_out_tiny_gaps = True
 z_seam_type = sharpest_corner
 z_seam_corner = hide_seam
 skin_outline_count = 1

resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg

@@ -21,7 +21,6 @@ wall_0_wipe_dist = 0.2
 top_bottom_thickness = 0.8
 top_bottom_pattern = lines
 optimize_wall_printing_order = True
-filter_out_tiny_gaps = True
 z_seam_type = sharpest_corner
 z_seam_corner = hide_seam
 skin_outline_count = 1

resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg

@@ -21,7 +21,6 @@ wall_0_wipe_dist = 0.2
 top_bottom_thickness = 0.8
 top_bottom_pattern = lines
 optimize_wall_printing_order = True
-filter_out_tiny_gaps = True
 z_seam_type = sharpest_corner
 z_seam_corner = hide_seam
 skin_outline_count = 1

resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg

@@ -21,7 +21,6 @@ wall_0_wipe_dist = 0.2
 top_bottom_thickness = 0.8
 top_bottom_pattern = lines
 optimize_wall_printing_order = True
-filter_out_tiny_gaps = True
 z_seam_type = sharpest_corner
 z_seam_corner = hide_seam
 skin_outline_count = 1

resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg

@@ -21,7 +21,6 @@ wall_0_wipe_dist = 0.2
 top_bottom_thickness = 0.8
 top_bottom_pattern = lines
 optimize_wall_printing_order = True
-filter_out_tiny_gaps = True
 z_seam_type = sharpest_corner
 z_seam_corner = hide_seam
 skin_outline_count = 1

resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg

@@ -21,7 +21,6 @@ wall_0_wipe_dist = 0.2
 top_bottom_thickness = 0.8
 top_bottom_pattern = lines
 optimize_wall_printing_order = True
-filter_out_tiny_gaps = True
 z_seam_type = sharpest_corner
 z_seam_corner = hide_seam
 skin_outline_count = 1

resources/quality/key3d/key3d_tyro_best.inst.cfg

@@ -30,7 +30,6 @@ wall_0_inset = 0
 optimize_wall_printing_order = False
 inset_direction = inside_out
 alternate_extra_perimeter = False
-filter_out_tiny_gaps = True
 fill_outline_gaps = True
 xy_offset = 0
 skin_no_small_gaps_heuristic = True

resources/quality/key3d/key3d_tyro_fast.inst.cfg

@@ -29,7 +29,6 @@ wall_0_inset = 0
 optimize_wall_printing_order = False
 inset_direction = inside_out
 alternate_extra_perimeter = False
-filter_out_tiny_gaps = True
 fill_outline_gaps = True
 xy_offset = 0
 skin_no_small_gaps_heuristic = True

resources/quality/key3d/key3d_tyro_normal.inst.cfg

@@ -29,7 +29,6 @@ wall_0_inset = 0
 optimize_wall_printing_order = False
 inset_direction = inside_out
 alternate_extra_perimeter = False
-filter_out_tiny_gaps = True
 fill_outline_gaps = True
 xy_offset = 0
 skin_no_small_gaps_heuristic = True

resources/quality/nwa3d_a31/nwa3d_a31_best.inst.cfg

@@ -31,7 +31,6 @@ wall_0_inset = 0
 optimize_wall_printing_order = False
 inset_direction = inside_out
 alternate_extra_perimeter = False
-filter_out_tiny_gaps = True
 fill_outline_gaps = True
 xy_offset = 0
 skin_no_small_gaps_heuristic = True