These values are already default

Raft base line spacing is already machine nozzle size * 4. PP-243

resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg

@@ -21,7 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5
 infill_sparse_density = 30
 layer_0_z_overlap = 0.22
 raft_airgap = 0.37
-raft_base_line_spacing = 1.6
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)

resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg

@@ -21,7 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5
 infill_sparse_density = 30
 layer_0_z_overlap = 0.22
 raft_airgap = 0.37
-raft_base_line_spacing = 1.6
 speed_layer_0 = =math.ceil(speed_print * 15 / 35)
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 20 / 35)

resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg

@@ -22,7 +22,6 @@ infill_sparse_density = 35
 layer_0_z_overlap = 0.22
 
 raft_airgap = 0.37
-raft_base_line_spacing = 2.4
 speed_layer_0 = =round(speed_print * 30 / 50)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)

resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg

@@ -22,7 +22,6 @@ infill_sparse_density = 35
 layer_0_z_overlap = 0.22
 
 raft_airgap = 0.37
-raft_base_line_spacing = 2.4
 speed_layer_0 = =math.ceil(speed_print * 30 / 35)
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 20 / 35)

resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg

@@ -20,7 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5
 infill_sparse_density = 30
 layer_0_z_overlap = 0.22
 raft_airgap = 0.57
-raft_base_line_spacing = 1.6
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)

resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg

@@ -20,7 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5
 infill_sparse_density = 30
 layer_0_z_overlap = 0.22
 raft_airgap = 0.57
-raft_base_line_spacing = 1.6
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_travel = 150

resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg

@@ -20,7 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5
 infill_sparse_density = 35
 layer_0_z_overlap = 0.22
 raft_airgap = 0.44
-raft_base_line_spacing = 2.4
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55

resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg

@@ -20,7 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5
 infill_sparse_density = 35
 layer_0_z_overlap = 0.22
 raft_airgap = 0.44
-raft_base_line_spacing = 2.4
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55

resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg

@@ -22,7 +22,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5
 infill_sparse_density = 25
 layer_0_z_overlap = 0.2
 raft_airgap = 0.25
-raft_base_line_spacing = 1
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True

resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg

@@ -22,7 +22,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5
 infill_sparse_density = 25
 layer_0_z_overlap = 0.2
 raft_airgap = 0.25
-raft_base_line_spacing = 1
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True