EN4 Run printer-linter

resources/definitions/elegoo_neptune_4.def.json

@@ -9,17 +9,22 @@
     },
     "overrides":
     {
-        "machine_name": { "default_value": "ELEGOO NEPTUNE 4" },
-        "machine_width": { "default_value": 235 },
-        "machine_depth": { "default_value": 230 },
-        "machine_height": { "default_value": 270 },
+        "acceleration_enabled": { "value": true },
+        "acceleration_layer_0": { "value": 3000 },
+        "acceleration_print": { "value": 3000 },
+        "acceleration_travel": { "value": 5000 },
+        "cool_fan_full_layer": { "value": 2 },
+        "infill_line_width":
+        {
+            "default_value": 0.45,
+            "value": "line_width + 0.05"
+        },
+        "infill_overlap": { "value": "0 if infill_sparse_density < 40.01 and infill_pattern != 'concentric' else -5" },
+        "initial_layer_line_width_factor": { "value": "100.0 if resolveOrValue('adhesion_type') == 'raft' else 125 if line_width < 0.5 else 110" },
         "machine_acceleration": { "value": 3000 },
-        "machine_heated_bed": { "default_value": true },
-        "machine_max_acceleration_e": { "value": 5000 },
-        "machine_max_acceleration_x": { "value": 5000 },
-        "machine_max_acceleration_y": { "value": 5000 },
-        "machine_nozzle_cool_down_speed": { "value": 0.75 },
-        "machine_nozzle_heat_up_speed": { "value": 1.6 },
+        "machine_depth": { "default_value": 230 },
+        "machine_end_gcode": { "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z2 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z" },
+        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
         "machine_head_with_fans_polygon":
         {
             "value": [
@@ -29,93 +34,83 @@
                 [40, -30]
             ]
         },
-        
+        "machine_heated_bed": { "default_value": true },
+        "machine_height": { "default_value": 270 },
+        "machine_max_acceleration_e": { "value": 5000 },
+        "machine_max_acceleration_x": { "value": 5000 },
+        "machine_max_acceleration_y": { "value": 5000 },
+        "machine_name": { "default_value": "ELEGOO NEPTUNE 4" },
+        "machine_nozzle_cool_down_speed": { "value": 0.75 },
+        "machine_nozzle_heat_up_speed": { "value": 1.6 },
+        "machine_start_gcode": { "default_value": "G28 ;home\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X1.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X1.1 Y80.0 Z0.28 F1500.0 E10 ;Draw the first line\nG1 X1.4 Y80.0 Z0.28 F5000.0 ;Move to side a little\nG1 X1.4 Y20 Z0.28 F1500.0 E20 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up" },
+        "machine_width": { "default_value": 235 },
         "retraction_amount": { "default_value": 0.5 },
-        "retraction_speed": { "default_value": 45 },
         "retraction_count_max": { "value": 80 },
-        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
-        "machine_start_gcode": { "default_value": "G28 ;home\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X1.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X1.1 Y80.0 Z0.28 F1500.0 E10 ;Draw the first line\nG1 X1.4 Y80.0 Z0.28 F5000.0 ;Move to side a little\nG1 X1.4 Y20 Z0.28 F1500.0 E20 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up" },
-        "machine_end_gcode": { "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z2 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z" },
-        
-        "acceleration_enabled": { "value": true },
-        "acceleration_layer_0": { "value": 3000 },
-        "acceleration_print": { "value": 3000 },
-        "acceleration_travel": { "value": 5000 },
-        
-        "cool_fan_full_layer": { "value": 2 },
-        
-        "infill_line_width":
-        {
-            "default_value": 0.45,
-            "value": "line_width + 0.05"
-        },
-        "speed_print": 
+        "retraction_speed": { "default_value": 45 },
+        "skirt_brim_speed":
         {
             "maximum_value_warning": "500",
-            "default_value": 250
+            "value": "speed_print_layer_0"
         },
-        "speed_wall":
+        "speed_infill":
         {
             "maximum_value_warning": "500",
-            "default_value": 125,
-            "value": "speed_print / 2"
+            "value": "speed_print"
         },
-        "speed_wall_0":
+        "speed_layer_0":
         {
+            "default_value": 60,
             "maximum_value_warning": "500",
-            "default_value": 125,
-            "value": "speed_wall"
+            "value": 60
         },
-        "speed_wall_x":
+        "speed_prime_tower": { "maximum_value_warning": "500" },
+        "speed_print":
         {
-            "maximum_value_warning": "500",
-            "default_value": 200,
-            "value": "speed_wall + (speed_wall / 2)"
+            "default_value": 250,
+            "maximum_value_warning": "500"
         },
+        "speed_print_layer_0": { "maximum_value_warning": "500" },
+        "speed_roofing": { "maximum_value_warning": "500" },
+        "speed_support": { "maximum_value_warning": "500" },
+        "speed_support_bottom": { "maximum_value_warning": "500" },
+        "speed_support_infill": { "maximum_value_warning": "500" },
+        "speed_support_interface": { "maximum_value_warning": "500" },
+        "speed_support_roof": { "maximum_value_warning": "500" },
         "speed_topbottom":
         {
-            "maximum_value_warning": "500",
             "default_value": 125,
+            "maximum_value_warning": "500",
             "value": "speed_wall"
         },
         "speed_travel":
         {
-            "maximum_value_warning": "500",
             "default_value": 250,
-            "value": "speed_print"
-        },
-        "speed_layer_0":
-        {
             "maximum_value_warning": "500",
-            "default_value": 60,
-            "value": 60
+            "value": "speed_print"
         },
-        "speed_print_layer_0": { "maximum_value_warning": "500" },
         "speed_travel_layer_0":
         {
-            "maximum_value_warning": "500",
             "default_value": 200,
+            "maximum_value_warning": "500",
             "value": "speed_layer_0*2"
         },
-        "speed_infill":
+        "speed_wall":
         {
+            "default_value": 125,
             "maximum_value_warning": "500",
-            "value": "speed_print"
+            "value": "speed_print / 2"
         },
-        "speed_roofing": { "maximum_value_warning": "500" },
-        "speed_support": { "maximum_value_warning": "500" },
-        "speed_support_infill": { "maximum_value_warning": "500" },
-        "speed_support_interface": { "maximum_value_warning": "500" },
-        "speed_support_roof": { "maximum_value_warning": "500" },
-        "speed_support_bottom": { "maximum_value_warning": "500" },
-        "speed_prime_tower": { "maximum_value_warning": "500" },
-        "skirt_brim_speed":
+        "speed_wall_0":
         {
+            "default_value": 125,
             "maximum_value_warning": "500",
-            "value": "speed_print_layer_0"
+            "value": "speed_wall"
         },
-        
-        "initial_layer_line_width_factor": { "value": "100.0 if resolveOrValue('adhesion_type') == 'raft' else 125 if line_width < 0.5 else 110" },
-        "infill_overlap": { "value": "0 if infill_sparse_density < 40.01 and infill_pattern != 'concentric' else -5" }
+        "speed_wall_x":
+        {
+            "default_value": 200,
+            "maximum_value_warning": "500",
+            "value": "speed_wall + (speed_wall / 2)"
+        }
     }
 }

resources/intent/elegoo_neptune_4/PLA/elegoo_n4_aa0.4_pla_0.05mm_visual.inst.cfg

@@ -12,6 +12,7 @@ type = intent
 variant = 0.40mm_Elegoo_Nozzle
 
 [values]
+skin_line_width = 0.4
 speed_print = 150
 top_bottom_thickness = 1.05
-skin_line_width = 0.4
+

resources/intent/elegoo_neptune_4/PLA/elegoo_n4_aa0.4_pla_0.15mm_engineering.inst.cfg

@@ -13,10 +13,10 @@ type = intent
 variant = 0.40mm_Elegoo_Nozzle
 
 [values]
-speed_print = 150
-speed_travel = =min(speed_print * 4 / 3, 250) if speed_print <= 250 else speed_print
 speed_infill = =speed_print
+speed_print = 150
 speed_topbottom = =speed_print * 2 / 3
+speed_travel = =min(speed_print * 4 / 3, 250) if speed_print <= 250 else speed_print
 speed_wall = =speed_print * 2 / 3
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall

resources/intent/elegoo_neptune_4/PLA/elegoo_n4_aa0.4_pla_0.15mm_visual.inst.cfg

@@ -12,6 +12,7 @@ type = intent
 variant = 0.40mm_Elegoo_Nozzle
 
 [values]
+skin_line_width = 0.4
 speed_print = 150
 top_bottom_thickness = 1.05
-skin_line_width = 0.4
+

resources/intent/elegoo_neptune_4/PLA/elegoo_n4_aa0.4_pla_0.1mm_engineering.inst.cfg

@@ -13,10 +13,10 @@ type = intent
 variant = 0.40mm_Elegoo_Nozzle
 
 [values]
-speed_print = 150
-speed_travel = =min(speed_print * 4 / 3, 250) if speed_print <= 250 else speed_print
 speed_infill = =speed_print
+speed_print = 150
 speed_topbottom = =speed_print * 2 / 3
+speed_travel = =min(speed_print * 4 / 3, 250) if speed_print <= 250 else speed_print
 speed_wall = =speed_print * 2 / 3
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall

resources/intent/elegoo_neptune_4/PLA/elegoo_n4_aa0.4_pla_0.1mm_visual.inst.cfg

@@ -12,6 +12,7 @@ type = intent
 variant = 0.40mm_Elegoo_Nozzle
 
 [values]
+skin_line_width = 0.4
 speed_print = 150
 top_bottom_thickness = 1
-skin_line_width = 0.4
+

resources/intent/elegoo_neptune_4/PLA/elegoo_n4_aa0.4_pla_0.2mm_quick.inst.cfg

@@ -13,12 +13,13 @@ type = intent
 variant = 0.40mm_Elegoo_Nozzle
 
 [values]
-speed_print = 300
-speed_travel = 400
 infill_sparse_density = 15
 speed_infill = =speed_print
+speed_print = 300
 speed_topbottom = =speed_print
+speed_travel = 400
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = 0.6
+

resources/intent/elegoo_neptune_4/PLA/elegoo_n4_aa0.4_pla_0.3mm_quick.inst.cfg

@@ -13,11 +13,11 @@ type = intent
 variant = 0.40mm_Elegoo_Nozzle
 
 [values]
-speed_print = 300
-speed_travel = 400
 infill_sparse_density = 10
 speed_infill = =speed_print
+speed_print = 300
 speed_topbottom = =speed_print
+speed_travel = 400
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall

resources/quality/elegoo/neptune_4/petg/nozzle_0.40/elegoo_n4_petg_nozzle_0.40_layer_0.20.inst.cfg

@@ -19,3 +19,4 @@ layer_0_z_overlap = =raft_airgap*0.6
 material_shrinkage_percentage_xy = 100.2
 raft_airgap = =0.35
 raft_margin = 10
+

resources/quality/elegoo/neptune_4/pla/nozzle_0.40/elegoo_n4_pla_nozzle_0.40_layer_0.10.inst.cfg

@@ -13,9 +13,9 @@ variant = 0.40mm_Elegoo_Nozzle
 [values]
 prime_tower_enable = False
 raft_airgap = 0.25
+skin_overlap = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 45 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 70)
-skin_overlap = 10
 top_bottom_thickness = 1