added printing profiles with materials for Alya 3DP

resources/quality/alya3dp/alya3dp_flex_normal.inst.cfg

@@ -0,0 +1,75 @@
+[general]
+version = 4
+definition = alya3dp
+name = Flex Normal
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = alya_normal
+weight = 2
+material = alya_flex
+
+[values]
+adhesion_type = raft
+layer_height_0 = 0.1
+skirt_line_count = 2
+skirt_gap = 2
+fill_outline_gaps = True
+infill_angles = [0,90 ]
+infill_sparse_density = 15
+material_diameter = 1.75
+retraction_min_travel = 0.8
+skin_angles = [0,90]
+top_layers = 6
+wall_line_count = 2
+infill_pattern = grid
+skin_line_width = 0.35
+raft_airgap = 0.18
+raft_base_line_spacing = 1.5
+raft_base_line_width = 0.9
+raft_base_thickness = 0.4
+raft_interface_line_width = 0.4
+raft_interface_thickness = 0.3
+raft_margin = 5
+raft_surface_layers = 3
+raft_surface_line_width = 0.4
+raft_surface_thickness = 0.2
+retract_at_layer_change = true
+retraction_hop = 0.5
+retraction_hop_enabled = true
+support_enable = True
+support_type = everywhere
+support_top_distance = 0.25
+support_z_distance = 0.25
+support_bottom_distance = 0.25
+support_brim_width = 6
+support_infill_rate = 15
+support_line_distance = 1.7
+support_line_width = 0.25
+support_initial_layer_line_distance = 2.7
+support_xy_distance = 0.71
+infill_line_width = 0.4
+line_width = 0.4
+optimize_wall_printing_order = True
+support_angle = 70
+wall_line_width_x = 0.4
+layer_0_z_overlap = 0.0
+speed_print = 20
+speed_topbottom = 15
+speed_wall_0 = 15
+speed_infill = 15
+speed_layer_0 = 15
+speed_support = 15
+speed_support_interface = 15
+speed_travel = 50
+raft_base_speed = 10
+raft_interface_speed = 15
+raft_surface_speed = 15
+raft_base_fan_speed = 0
+raft_interface_fan_speed = 0
+raft_surface_fan_speed = 100
+retraction_amount = 1.5
+retraction_speed = 20.0
+cool_fan_speed = 30
+cool_fan_speed_0 = 30

resources/quality/alya3dp/alya3dp_generic_pla_normal.inst.cfg

@@ -0,0 +1,75 @@
+[general]
+version = 4
+definition = alya3dp
+name = Normal
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = alya_normal
+weight = 3
+material = generic_pla
+
+[values]
+adhesion_type = raft
+layer_height_0 = 0.1
+skirt_line_count = 2
+skirt_gap = 2
+fill_outline_gaps = True
+infill_angles = [0,90 ]
+infill_sparse_density = 15
+material_diameter = 1.75
+retraction_min_travel = 0.8
+skin_angles = [0,90]
+top_layers = 6
+wall_line_count = 2
+infill_pattern = grid
+skin_line_width = 0.35
+raft_airgap = 0.18
+raft_base_line_spacing = 1.5
+raft_base_line_width = 0.9
+raft_base_thickness = 0.4
+raft_interface_line_width = 0.4
+raft_interface_thickness = 0.3
+raft_margin = 5
+raft_surface_layers = 3
+raft_surface_line_width = 0.4
+raft_surface_thickness = 0.2
+retract_at_layer_change = true
+retraction_hop = 0.5
+retraction_hop_enabled = true
+support_enable = True
+support_type = everywhere
+support_top_distance = 0.25
+support_z_distance = 0.25
+support_bottom_distance = 0.25
+support_brim_width = 6
+support_infill_rate = 15
+support_line_distance = 1.7
+support_line_width = 0.25
+support_initial_layer_line_distance = 2.7
+support_xy_distance = 0.71
+infill_line_width = 0.4
+line_width = 0.4
+optimize_wall_printing_order = True
+support_angle = 70
+wall_line_width_x = 0.4
+layer_0_z_overlap = 0.0
+speed_print = 40
+speed_topbottom = 30
+speed_wall_0 = 35
+speed_infill = 45
+speed_layer_0 = 25
+speed_support = 45
+speed_support_interface = 35
+speed_travel = 60
+raft_base_speed        = 15
+raft_interface_speed   = 20
+raft_surface_speed     = 35
+raft_surface_fan_speed = 100
+raft_base_fan_speed    = 0
+raft_interface_fan_speed = 0
+retraction_amount = 1.5
+retraction_speed = 40.0
+cool_fan_speed = 100
+cool_fan_speed_0 = 100

resources/quality/alya3dp/alya3dp_normal.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Normal
+definition = alya3dp
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = alya_normal
+weight = 0
+global_quality = True
+
+[values]
+layer_height = 0.16
+layer_height_0 = 0.1

resources/quality/alya3dp/alya3dp_pla_normal.inst.cfg

@@ -0,0 +1,75 @@
+[general]
+version = 4
+definition = alya3dp
+name = Normal
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = alya_normal
+weight = 2
+material = alya_pla
+
+[values]
+adhesion_type = raft
+layer_height_0 = 0.1
+skirt_line_count = 2
+skirt_gap = 2
+fill_outline_gaps = True
+infill_angles = [0,90 ]
+infill_sparse_density = 15
+material_diameter = 1.75
+retraction_min_travel = 0.8
+skin_angles = [0,90]
+top_layers = 6
+wall_line_count = 2
+infill_pattern = grid
+skin_line_width = 0.35
+raft_airgap = 0.18
+raft_base_line_spacing = 1.5
+raft_base_line_width = 0.9
+raft_base_thickness = 0.4
+raft_interface_line_width = 0.4
+raft_interface_thickness = 0.3
+raft_margin = 5
+raft_surface_layers = 3
+raft_surface_line_width = 0.4
+raft_surface_thickness = 0.2
+retract_at_layer_change = true
+retraction_hop = 0.5
+retraction_hop_enabled = true
+support_enable = True
+support_type = everywhere
+support_top_distance = 0.25
+support_z_distance = 0.25
+support_bottom_distance = 0.25
+support_brim_width = 6
+support_infill_rate = 15
+support_line_distance = 1.7
+support_line_width = 0.25
+support_initial_layer_line_distance = 2.7
+support_xy_distance = 0.71
+infill_line_width = 0.4
+line_width = 0.4
+optimize_wall_printing_order = True
+support_angle = 70
+wall_line_width_x = 0.4
+layer_0_z_overlap = 0.0
+speed_print = 40
+speed_topbottom = 30
+speed_wall_0 = 35
+speed_infill = 45
+speed_layer_0 = 25
+speed_support = 45
+speed_support_interface = 35
+speed_travel = 60
+raft_base_speed        = 15
+raft_interface_speed   = 20
+raft_surface_speed     = 35
+raft_surface_fan_speed = 100
+raft_base_fan_speed    = 0
+raft_interface_fan_speed = 0
+retraction_amount = 1.5
+retraction_speed = 40.0
+cool_fan_speed = 100
+cool_fan_speed_0 = 100