Merge pull request #2162 from FABtotum/master

FABtotum Personal Fabricator

resources/definitions/fabtotum.def.json

@@ -0,0 +1,71 @@
+{
+  "id": "fabtotum",
+  "version": 2,
+  "name": "FABtotum Personal Fabricator",
+  "inherits": "fdmprinter",
+  "metadata": {
+    "visible": true,
+    "author": "FABtotum",
+    "manufacturer": "FABtotum",
+    "category": "Other",
+    "file_formats": "text/x-gcode",
+    "platform": "fabtotum_platform.stl",
+    "icon": "fabtotum_platform.png",
+    "has_machine_quality": true,
+    "has_variants": true,
+    "variants_name": "Head",
+    "preferred_variant": "*lite04*",
+    "preferred_material": "*fabtotum_pla*",
+    "supports_usb_connection": false
+ },
+
+  "overrides": {
+    "machine_name": { "default_value": "FABtotum Personal Fabricator" },
+    "machine_start_gcode": {
+      "default_value": ";Layer height: {layer_height}\n;Walls: {wall_thickness}\n;Fill: {infill_sparse_density}\n;Top\\Bottom Thickness: {top_bottom_thickness}\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG4 S1 ;1 millisecond pause to buffer the bep bep \nM728 ;FAB bep bep (start the print, go check the oozing and skirt lines adesion) \nG4 S1 ;1 second pause to reach the printer (run fast)\nG92 E0 ;zero the extruded length \nG1 F200 E35  ;slowly extrude 35mm of filament to clean the nozzle and build up extrusion pressure \nG92 E0 ;zero the extruded length again \nG1 F{speed_travel} ;Set travel speed \n;print"
+    },
+    "machine_end_gcode": {
+      "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-3 X+5 Y+5 F5000 ;move Z up a bit and retract filament even more\n;end of the print\nM84 ;steppers off\nG90 ;absolute positioning\nM728 ;FAB bep bep (end print)"
+    },
+    "gantry_height": { "default_value": 55 },
+    "machine_width": { "default_value": 214 },
+    "machine_height": { "default_value": 241.5 },
+    "machine_depth": { "default_value": 234 },
+    "machine_center_is_zero": { "default_value": false },
+    "machine_heated_bed": {	"default_value": true },
+    "machine_nozzle_size": { "default_value": 0.4 },
+    "machine_head_with_fans_polygon": { "default_value": [[-75, 35], [-75, -18], [18, 35], [18, -18]] },
+    "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
+    "machine_max_feedrate_x": { "default_value": 250 },
+    "machine_max_feedrate_y": { "default_value": 250 },
+    "machine_max_feedrate_z": { "default_value": 15 },
+    "machine_max_acceleration_x": { "default_value": 10000 },
+    "machine_max_acceleration_y": { "default_value": 10000 },
+    "machine_max_acceleration_z": { "default_value": 50 },
+    "machine_max_acceleration_e": { "default_value": 100 },
+    "machine_acceleration": { "default_value": 4000 },
+    "machine_max_jerk_xy": { "default_value": 25.0 },
+    "machine_max_jerk_z": { "default_value": 0.4 },
+    "machine_max_jerk_e": { "default_value": 1.0 },
+    "retraction_hop_enabled": { "default_value": false },
+    "material_diameter": { "default_value": 1.75 },
+    "material_final_print_temperature": { "value": "material_print_temperature - 5" },
+    "material_initial_print_temperature": { "value": "material_print_temperature" },
+    "travel_avoid_distance": { "default_value": 1, "value": 1 },
+    "speed_travel": { "default_value": 200, "value": 200 },
+    "speed_infill": { "value": "round(speed_print * 1.05, 0)" },
+    "speed_topbottom": { "value": "round(speed_print * 0.95, 0)" },
+    "speed_wall": { "value": "speed_print" },
+    "speed_wall_0": { "value": "round(speed_print * 0.9, 0)" },
+    "speed_wall_x": { "value": "speed_wall" },
+    "speed_layer_0": { "value": "min(round(speed_print * 0.75, 0), 45.0)" },
+    "speed_travel_layer_0": { "value": "round(speed_travel * 0.7, 0)" },
+    "skirt_brim_speed": { "value": "speed_layer_0" },
+    "skirt_line_count": { "default_value": 3 },
+    "skirt_brim_minimal_length": { "default_value": 150 },
+    "infill_sparse_density": { "default_value": 24 },
+    "top_bottom_thickness": { "default_value": 0.6 },
+    "support_z_distance": { "default_value": 0.2, "value": "min(2 * layer_height, machine_nozzle_size * 0.75)" },
+    "support_interface_enable": { "default_value": true }
+  }
+}

resources/quality/fabtotum/fabtotum_abs_fast.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+version = 2
+definition = fabtotum
+name = Fast Quality
+
+[metadata]
+type = quality
+setting_version = 2
+material = generic_fabtotum_abs
+quality_type = fast
+weight = -1
+
+[values]
+adhesion_type = raft
+layer_height = 0.2
+layer_height_0 = 0.2
+cool_fan_enabled = True
+cool_fan_full_at_height = 0.4
+cool_fan_speed = 50
+cool_fan_speed_max = 50
+cool_fan_speed_min = 50
+cool_min_layer_time = 3
+cool_min_speed = 20
+

resources/quality/fabtotum/fabtotum_abs_high.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+version = 2
+definition = fabtotum
+name = High Quality
+
+[metadata]
+type = quality
+setting_version = 2
+material = generic_fabtotum_abs
+quality_type = high
+weight = 1
+
+[values]
+adhesion_type = raft
+layer_height = 0.1
+layer_height_0 = 0.1
+cool_fan_enabled = True
+cool_fan_full_at_height = 0.2
+cool_fan_speed = 50
+cool_fan_speed_max = 50
+cool_fan_speed_min = 50
+cool_min_layer_time = 3
+cool_min_speed = 20
+

resources/quality/fabtotum/fabtotum_abs_normal.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+version = 2
+definition = fabtotum
+name = Normal Quality
+
+[metadata]
+type = quality
+setting_version = 2
+material = generic_fabtotum_abs
+quality_type = normal
+weight = 0
+
+[values]
+adhesion_type = raft
+layer_height = 0.15
+layer_height_0 = 0.15
+cool_fan_enabled = True
+cool_fan_full_at_height = 0.3
+cool_fan_speed = 50
+cool_fan_speed_max = 50
+cool_fan_speed_min = 50
+cool_min_layer_time = 3
+cool_min_speed = 20
+

resources/quality/fabtotum/fabtotum_nylon_fast.inst.cfg

@@ -0,0 +1,57 @@
+[general]
+version = 2
+name = Fast Quality
+definition = fabtotum
+
+[metadata]
+type = quality
+material = generic_fabtotum_nylon
+quality_type = fast
+weight = -1
+setting_version = 2
+
+[values]
+adhesion_type = raft
+brim_width = 4
+cool_fan_enabled = False
+cool_fan_full_at_height = 0.45
+cool_fan_speed = 0
+cool_fan_speed_max = 0
+cool_fan_speed_min = 0
+cool_min_layer_time = 5
+cool_min_speed = 0
+infill_overlap = 15
+infill_sparse_density = 24
+layer_height = 0.20
+layer_height_0 = 0.15
+line_width = =machine_nozzle_size
+material_flow = 100
+raft_airgap = 0.22
+raft_base_line_width= =line_width * 2
+raft_base_thickness = =layer_height_0 * 2
+raft_interface_line_width  = =line_width
+raft_interface_thickness = =layer_height
+raft_margin = 5
+raft_surface_layers = 2
+raft_surface_line_width = =line_width
+raft_surface_thickness = =layer_height
+retraction_hop = 0.5
+retraction_hop_enabled = False
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+skirt_brim_minimal_length = 75
+skirt_gap = 1.5
+skirt_line_count = 5
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_print = 50
+speed_topbottom = 40
+speed_travel = 200
+speed_wall_0 = 40
+speed_wall_x = =speed_print
+support_angle = 70
+support_type = buildplate
+support_z_distance = 0.15
+top_bottom_thickness = 0.8
+wall_thickness = 0.8
+z_seam_type = random

resources/quality/fabtotum/fabtotum_nylon_high.inst.cfg

@@ -0,0 +1,57 @@
+[general]
+version = 2
+name = High Quality
+definition = fabtotum
+
+[metadata]
+type = quality
+material = generic_fabtotum_nylon
+quality_type = high
+weight = 1
+setting_version = 2
+
+[values]
+adhesion_type = raft
+brim_width = 4
+cool_fan_enabled = False
+cool_fan_full_at_height = 0.45
+cool_fan_speed = 0
+cool_fan_speed_max = 0
+cool_fan_speed_min = 0
+cool_min_layer_time = 5
+cool_min_speed = 0
+infill_overlap = 15
+infill_sparse_density = 24
+layer_height = 0.10
+layer_height_0 = 0.10
+line_width = =machine_nozzle_size
+material_flow = 100
+raft_airgap = 0.22
+raft_base_line_width= =line_width * 2
+raft_base_thickness = =layer_height_0 * 2
+raft_interface_line_width  = =line_width
+raft_interface_thickness = =layer_height
+raft_margin = 5
+raft_surface_layers = 2
+raft_surface_line_width = =line_width
+raft_surface_thickness = =layer_height
+retraction_hop = 0.5
+retraction_hop_enabled = False
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+skirt_brim_minimal_length = 75
+skirt_gap = 1.5
+skirt_line_count = 5
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_print = 50
+speed_topbottom = 40
+speed_travel = 200
+speed_wall_0 = 40
+speed_wall_x = =speed_print
+support_angle = 70
+support_type = buildplate
+support_z_distance = 0.15
+top_bottom_thickness = 0.8
+wall_thickness = 0.8
+z_seam_type = random

resources/quality/fabtotum/fabtotum_nylon_normal.inst.cfg

@@ -0,0 +1,58 @@
+[general]
+version = 2
+name = Normal Quality
+definition = fabtotum
+
+[metadata]
+type = quality
+material = generic_fabtotum_nylon
+quality_type = normal
+weight = 0
+setting_version = 2
+
+[values]
+adhesion_type = raft
+brim_width = 4
+cool_fan_enabled = False
+cool_fan_full_at_height = 0.45
+cool_fan_speed = 0
+cool_fan_speed_max = 0
+cool_fan_speed_min = 0
+cool_min_layer_time = 5
+cool_min_speed = 0
+infill_overlap = 15
+infill_sparse_density = 24
+layer_height = 0.15
+layer_height_0 = 0.10
+line_width = =machine_nozzle_size
+material_flow = 100
+raft_airgap = 0.22
+raft_base_line_width= =line_width * 2
+raft_base_thickness = =layer_height_0 * 2
+raft_interface_line_width  = =line_width
+raft_interface_thickness = =layer_height
+raft_margin = 5
+raft_surface_layers = 2
+raft_surface_line_width = =line_width
+raft_surface_thickness = =layer_height
+retraction_hop = 0.5
+retraction_hop_enabled = False
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+skirt_brim_minimal_length = 75
+skirt_gap = 1.5
+skirt_line_count = 5
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_print = 50
+speed_topbottom = 40
+speed_travel = 200
+speed_wall_0 = 40
+speed_wall_x = =speed_print
+support_angle = 70
+support_type = buildplate
+support_z_distance = 0.15
+top_bottom_thickness = 0.8
+wall_thickness = 0.8
+z_seam_type = random
+

resources/quality/fabtotum/fabtotum_pla_fast.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+version = 2
+definition = fabtotum
+name = Fast Quality
+
+[metadata]
+type = quality
+setting_version = 2
+material = generic_fabtotum_pla
+quality_type = fast
+weight = -1
+
+[values]
+adhesion_type = skirt
+layer_height = 0.2
+layer_height_0 = 0.2
+cool_fan_enabled = True
+cool_fan_full_at_height = 0.4
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_fan_speed_min = 100
+cool_min_layer_time = 5
+cool_min_speed = 20
+