|
|
@@ -0,0 +1,83 @@
|
|
|
+{
|
|
|
+ "version": 2,
|
|
|
+ "name": "fusedform_doppia_base",
|
|
|
+ "inherits": "fusedform_base",
|
|
|
+ "metadata": {
|
|
|
+ "author": "Juan Blanco",
|
|
|
+ "manufacturer": "Fused Form",
|
|
|
+ "visible": false,
|
|
|
+ "machine_extruder_trains":{"0": "fusedform_doppia_base_extruder_0","1": "fusedform_doppia_base_extruder_1"},
|
|
|
+ "preferred_material": "generic_pla",
|
|
|
+ "exclude_materials": [ "structur3d_dap100silicone" ],
|
|
|
+ "has_machine_quality": true,
|
|
|
+ "has_materials": true,
|
|
|
+ "preferred_quality_type": "normal"
|
|
|
+ },
|
|
|
+
|
|
|
+ "overrides": {
|
|
|
+ "machine_heated_bed": { "default_value": true },
|
|
|
+ "machine_center_is_zero": {"default_value": false},
|
|
|
+ "machine_head_with_fans_polygon":{"default_value": [
|
|
|
+ [ -20, 20 ],
|
|
|
+ [ -20, -20 ],
|
|
|
+ [ 18, 20 ],
|
|
|
+ [ 18, -18 ]
|
|
|
+ ]
|
|
|
+ },
|
|
|
+ "gantry_height": {"value": "70"},
|
|
|
+
|
|
|
+ "machine_use_extruder_offset_to_offset_coords": {"default_value": true},
|
|
|
+ "machine_gcode_flavor": {"default_value": "RepRap (Marlin/Sprinter)"},
|
|
|
+ "machine_start_gcode": {"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\n;Put printing message on LCD screen\nM117 Printing..."},
|
|
|
+ "machine_end_gcode": {"value": "'M104 S0 ;extruder heater off' + ('\\nM140 S0 ;heated bed heater off' if machine_heated_bed else '') + '\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning\\nM107 ; Fans off'"},
|
|
|
+
|
|
|
+ "layer_height": { "default_value": 0.15 },
|
|
|
+ "layer_height_0": { "default_value": 0.2 },
|
|
|
+
|
|
|
+ "wall_line_count":{ "value": 3 },
|
|
|
+ "wall_thickness": { "value": 1.2 },
|
|
|
+ "top_bottom_thickness": {"value": 1.5},
|
|
|
+ "optimize_wall_printing_order": {"value": true},
|
|
|
+
|
|
|
+ "infill_sparse_density": {"value":15},
|
|
|
+ "infill_overlap": {"value": 0},
|
|
|
+
|
|
|
+ "speed_print": { "value": 45 },
|
|
|
+ "speed_infill": { "value": 45 },
|
|
|
+ "speed_travel": { "value": 75 },
|
|
|
+ "speed_topbottom": {"value": 40 },
|
|
|
+ "speed_wall": { "value": 35 },
|
|
|
+ "speed_wall_x": { "value": 40 },
|
|
|
+ "speed_equalize_flow_max": { "value": 70 },
|
|
|
+
|
|
|
+ "retraction_enable": {"default_value":true},
|
|
|
+ "retraction_amount": { "default_value": 4 },
|
|
|
+ "retraction_speed": { "default_value": 70},
|
|
|
+ "retraction_min_travel": {"value":5 },
|
|
|
+ "retraction_count_max": {"value":10 },
|
|
|
+ "retraction_extrusion_window": {"value":4 },
|
|
|
+ "retraction_hop": {"default_value":0.2},
|
|
|
+ "retraction_hop_enabled": {"value":true},
|
|
|
+ "speed_z_hop": {"value":2.5 },
|
|
|
+
|
|
|
+ "cool_fan_enabled": {"default_value":true},
|
|
|
+ "cool_fan_full_at_height": {"value":0.4},
|
|
|
+ "cool_fan_full_layer": {"value":2},
|
|
|
+ "cool_min_speed": {"value":30},
|
|
|
+
|
|
|
+ "support_enable": {"value":true},
|
|
|
+ "support_angle": {"default_value": 50},
|
|
|
+ "support_brim_enable": {"value":true},
|
|
|
+ "support_infill_angles": {"value":[-45]},
|
|
|
+ "support_interface_density": {"value": 70},
|
|
|
+ "support_interface_enable": {"value": true },
|
|
|
+ "support_interface_height": {"value": 0.5},
|
|
|
+ "support_interface_pattern": {"default_value":"lines"},
|
|
|
+ "support_pattern": {"default_value":"lines"},
|
|
|
+ "support_xy_distance": {"value": 0.5},
|
|
|
+ "support_z_distance": {"value": 0.3 },
|
|
|
+
|
|
|
+
|
|
|
+ "adhesion_type": {"default_value":"skirt"}
|
|
|
+ }
|
|
|
+}
|
FusedForm