Put stand-by temperature back in optimised profiles

The stand-by temperature should be 175 for these profiles because the UM3 firmware levels the bed with that temperature. It should be 100 in the quality profiles because that's what the stand-by temperature should be when standing by while the other nozzle is printing.

Contributes to issue CURA-3960.

resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg

@@ -36,6 +36,7 @@ material_flow = 106
 material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
+material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
 retraction_count_max = 12

resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg

@@ -36,6 +36,7 @@ material_flow = 106
 material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
+material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
 retraction_amount = 7

resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg

@@ -34,6 +34,7 @@ material_final_print_temperature = =material_print_temperature - 21
 material_flow = 106
 material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature_layer_0 = =default_material_print_temperature
+material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
 retraction_count_max = 12

resources/quality/ultimaker3/um3_aa0.8_CPEP_Draft_Print.inst.cfg

@@ -19,6 +19,7 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 10
 material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
 retraction_combing = off
 retraction_hop = 0.1
 retraction_hop_enabled = False

resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg

@@ -20,6 +20,7 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing = off
 retraction_hop = 0.1

resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg

@@ -20,6 +20,7 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 7
 material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing = off
 retraction_hop = 0.1

resources/quality/ultimaker3/um3_aa0.8_PC_Draft_Print.inst.cfg

@@ -17,6 +17,7 @@ infill_before_walls = True
 line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
 raft_airgap = 0.5
 raft_margin = 15
 skin_overlap = 0

resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg

@@ -17,6 +17,7 @@ infill_before_walls = True
 layer_height = 0.4
 line_width = =machine_nozzle_size * 0.875
 material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
 raft_airgap = 0.5
 raft_margin = 15
 skin_overlap = 0

resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg

@@ -18,6 +18,7 @@ layer_height = 0.3
 line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
 raft_airgap = 0.5
 raft_margin = 15
 skin_overlap = 0

resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg

@@ -33,6 +33,7 @@ material_flow = 105
 material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
+material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100