|
|
@@ -1,133 +1,126 @@
|
|
|
{
|
|
|
- "version": 2,
|
|
|
- "name": "AnkerMake M5",
|
|
|
- "inherits": "fdmprinter",
|
|
|
- "metadata": {
|
|
|
- "visible": true,
|
|
|
- "author": "just-trey",
|
|
|
- "manufacturer": "AnkerMake",
|
|
|
- "file_formats": "text/x-gcode",
|
|
|
- "platform": "ankermake_m5_platform.obj",
|
|
|
- "has_machine_quality": true,
|
|
|
- "machine_extruder_trains": { "0": "ankermake_m5_extruder_0" },
|
|
|
- "platform_texture": "ankermake_m5.png",
|
|
|
- "preferred_material": "generic_pla",
|
|
|
- "preferred_quality_type": "normal"
|
|
|
- },
|
|
|
- "overrides": {
|
|
|
- "machine_name": { "default_value": "AnkerMake M5" },
|
|
|
- "machine_start_gcode": {
|
|
|
- "default_value": "M104 S{material_print_temperature_layer_0} ; set final nozzle temp\nM190 S{material_bed_temperature_layer_0} ; set and wait for nozzle temp to stabilize\nM109 S{material_print_temperature_layer_0} ; wait for nozzle temp to stabilize\nG28 ;Home\nG1 E10 F3600; push out retracted filament(fix for over retraction after prime)"
|
|
|
+ "version": 2,
|
|
|
+ "name": "AnkerMake M5",
|
|
|
+ "inherits": "fdmprinter",
|
|
|
+ "metadata":
|
|
|
+ {
|
|
|
+ "visible": true,
|
|
|
+ "author": "just-trey",
|
|
|
+ "manufacturer": "AnkerMake",
|
|
|
+ "file_formats": "text/x-gcode",
|
|
|
+ "platform": "ankermake_m5_platform.obj",
|
|
|
+ "has_machine_quality": true,
|
|
|
+ "machine_extruder_trains": { "0": "ankermake_m5_extruder_0" },
|
|
|
+ "platform_texture": "ankermake_m5.png",
|
|
|
+ "preferred_material": "generic_pla",
|
|
|
+ "preferred_quality_type": "normal"
|
|
|
},
|
|
|
- "material_diameter": { "default_value": 1.75 },
|
|
|
- "machine_width": { "default_value": 235 },
|
|
|
- "machine_depth": { "default_value": 235 },
|
|
|
- "machine_height": { "default_value": 250 },
|
|
|
- "machine_heated_bed": { "default_value": true },
|
|
|
- "gantry_height": { "value": 25 },
|
|
|
-
|
|
|
- "hole_xy_offset": { "value": 0.2 },
|
|
|
-
|
|
|
- "top_bottom_thickness": { "value": "layer_height * 4" },
|
|
|
- "skin_monotonic": { "default_value": true },
|
|
|
-
|
|
|
- "infill_sparse_density": { "value": 25 },
|
|
|
- "infill_pattern": {
|
|
|
- "value": "'lines' if infill_sparse_density >= 25 else 'grid'"
|
|
|
- },
|
|
|
- "zig_zaggify_infill": {
|
|
|
- "value": "infill_pattern == 'cross' or infill_pattern == 'cross_3d' or infill_pattern == 'lines'"
|
|
|
- },
|
|
|
-
|
|
|
- "material_print_temperature": {
|
|
|
- "maximum_value_warning": "260"
|
|
|
- },
|
|
|
- "material_print_temperature_layer_0": {
|
|
|
- "value": "material_print_temperature + 5",
|
|
|
- "maximum_value_warning": "270"
|
|
|
- },
|
|
|
- "material_initial_print_temperature": {
|
|
|
- "value": "material_print_temperature"
|
|
|
- },
|
|
|
- "material_final_print_temperature": {
|
|
|
- "value": "material_print_temperature"
|
|
|
- },
|
|
|
- "material_bed_temperature": { "maximum_value_warning": "110" },
|
|
|
- "material_bed_temperature_layer_0": { "maximum_value_warning": "110" },
|
|
|
- "skin_material_flow": { "value": 97 },
|
|
|
- "material_flow_layer_0": { "value": 115 },
|
|
|
-
|
|
|
- "speed_print": { "value": 250.0, "maximum_value_warning": 255 },
|
|
|
- "speed_infill": { "maximum_value_warning": 255 },
|
|
|
- "speed_wall": { "value": 150.0, "maximum_value_warning": 255 },
|
|
|
- "speed_wall_x": { "value": 250.0, "maximum_value_warning": 255 },
|
|
|
- "speed_support": { "maximum_value_warning": 255 },
|
|
|
- "speed_support_infill": { "maximum_value_warning": 255 },
|
|
|
- "speed_support_interface": { "maximum_value_warning": 255 },
|
|
|
- "speed_support_roof": { "maximum_value_warning": 255 },
|
|
|
- "speed_support_bottom": { "maximum_value_warning": 255 },
|
|
|
- "speed_topbottom": { "value": 150.0 },
|
|
|
- "speed_travel": { "value": 250.0 },
|
|
|
- "acceleration_enabled": { "value": "true" },
|
|
|
- "acceleration_print": { "maximum_value_warning": "2500", "value": "2500" },
|
|
|
- "acceleration_infill": { "maximum_value_warning": "2500" },
|
|
|
- "acceleration_wall": { "maximum_value_warning": "2500" },
|
|
|
- "acceleration_wall_0": { "maximum_value_warning": "2500" },
|
|
|
- "acceleration_wall_x": { "maximum_value_warning": "2500" },
|
|
|
- "acceleration_roofing": { "maximum_value_warning": "2500" },
|
|
|
- "acceleration_topbottom": { "maximum_value_warning": "2500" },
|
|
|
- "acceleration_support": { "maximum_value_warning": "2500" },
|
|
|
- "acceleration_support_infill": { "maximum_value_warning": "2500" },
|
|
|
- "acceleration_support_interface": { "maximum_value_warning": "2500" },
|
|
|
- "acceleration_support_roof": { "maximum_value_warning": "2500" },
|
|
|
- "acceleration_support_bottom": { "maximum_value_warning": "2500" },
|
|
|
- "acceleration_prime_tower": { "maximum_value_warning": "2500" },
|
|
|
- "acceleration_travel": {
|
|
|
- "maximum_value_warning": "2500",
|
|
|
- "value": "acceleration_print"
|
|
|
- },
|
|
|
- "acceleration_layer_0": { "maximum_value_warning": "2500" },
|
|
|
- "acceleration_print_layer_0": { "maximum_value_warning": "2500" },
|
|
|
- "acceleration_travel_layer_0": {
|
|
|
- "maximum_value_warning": "2500",
|
|
|
- "value": "acceleration_travel"
|
|
|
- },
|
|
|
- "acceleration_skirt_brim": { "maximum_value_warning": "2500" },
|
|
|
-
|
|
|
- "retraction_amount": { "default_value": 1.5 },
|
|
|
- "retraction_speed": { "default_value": 60 },
|
|
|
- "retraction_combing": {
|
|
|
- "value": "'off' if retraction_hop_enabled else 'infill'"
|
|
|
- },
|
|
|
- "retraction_hop": { "value": 0.2 },
|
|
|
-
|
|
|
- "cool_min_layer_time": { "value": 6 },
|
|
|
- "cool_min_speed": { "value": 30 },
|
|
|
-
|
|
|
- "support_angle": {
|
|
|
- "value": "math.floor(math.degrees(math.atan(line_width / 2.0 /layer_height)))"
|
|
|
- },
|
|
|
- "support_infill_rate": {
|
|
|
- "value": "0 if support_enable and support_structure == 'tree' else 20"
|
|
|
- },
|
|
|
- "support_z_distance": { "value": "layer_height * 2" },
|
|
|
- "support_xy_distance": { "value": "wall_line_width_0 * 2" },
|
|
|
- "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
|
|
|
- "support_xy_distance_overhang": { "value": "wall_line_width_0" },
|
|
|
- "support_brim_width": { "value": 4.0 },
|
|
|
- "minimum_support_area": { "value": 2 },
|
|
|
- "support_interface_enable": { "value": true },
|
|
|
- "support_roof_enable": { "value": true },
|
|
|
- "support_interface_skip_height": { "value": 0.2 },
|
|
|
- "support_interface_density": { "value": 33.333 },
|
|
|
- "support_interface_pattern": { "value": "'grid'" },
|
|
|
- "minimum_interface_area": { "value": 10 },
|
|
|
-
|
|
|
- "adhesion_type": { "default_value": "skirt" },
|
|
|
- "skirt_line_count": { "value": 3 },
|
|
|
-
|
|
|
- "wall_overhang_angle": { "value": 55 },
|
|
|
- "wall_overhang_speed_factor": { "value": 55 },
|
|
|
- "small_hole_max_size": { "value": 10 }
|
|
|
- }
|
|
|
-}
|
|
|
+ "overrides":
|
|
|
+ {
|
|
|
+ "acceleration_enabled": { "value": "true" },
|
|
|
+ "acceleration_infill": { "maximum_value_warning": "2500" },
|
|
|
+ "acceleration_layer_0": { "maximum_value_warning": "2500" },
|
|
|
+ "acceleration_prime_tower": { "maximum_value_warning": "2500" },
|
|
|
+ "acceleration_print":
|
|
|
+ {
|
|
|
+ "maximum_value_warning": "2500",
|
|
|
+ "value": "2500"
|
|
|
+ },
|
|
|
+ "acceleration_print_layer_0": { "maximum_value_warning": "2500" },
|
|
|
+ "acceleration_roofing": { "maximum_value_warning": "2500" },
|
|
|
+ "acceleration_skirt_brim": { "maximum_value_warning": "2500" },
|
|
|
+ "acceleration_support": { "maximum_value_warning": "2500" },
|
|
|
+ "acceleration_support_bottom": { "maximum_value_warning": "2500" },
|
|
|
+ "acceleration_support_infill": { "maximum_value_warning": "2500" },
|
|
|
+ "acceleration_support_interface": { "maximum_value_warning": "2500" },
|
|
|
+ "acceleration_support_roof": { "maximum_value_warning": "2500" },
|
|
|
+ "acceleration_topbottom": { "maximum_value_warning": "2500" },
|
|
|
+ "acceleration_travel":
|
|
|
+ {
|
|
|
+ "maximum_value_warning": "2500",
|
|
|
+ "value": "acceleration_print"
|
|
|
+ },
|
|
|
+ "acceleration_travel_layer_0":
|
|
|
+ {
|
|
|
+ "maximum_value_warning": "2500",
|
|
|
+ "value": "acceleration_travel"
|
|
|
+ },
|
|
|
+ "acceleration_wall": { "maximum_value_warning": "2500" },
|
|
|
+ "acceleration_wall_0": { "maximum_value_warning": "2500" },
|
|
|
+ "acceleration_wall_x": { "maximum_value_warning": "2500" },
|
|
|
+ "adhesion_type": { "default_value": "skirt" },
|
|
|
+ "cool_min_layer_time": { "value": 6 },
|
|
|
+ "cool_min_speed": { "value": 30 },
|
|
|
+ "gantry_height": { "value": 25 },
|
|
|
+ "hole_xy_offset": { "value": 0.2 },
|
|
|
+ "infill_pattern": { "value": "'lines' if infill_sparse_density >= 25 else 'grid'" },
|
|
|
+ "infill_sparse_density": { "value": 25 },
|
|
|
+ "machine_depth": { "default_value": 235 },
|
|
|
+ "machine_heated_bed": { "default_value": true },
|
|
|
+ "machine_height": { "default_value": 250 },
|
|
|
+ "machine_name": { "default_value": "AnkerMake M5" },
|
|
|
+ "machine_start_gcode": { "default_value": "M104 S{material_print_temperature_layer_0} ; set final nozzle temp\nM190 S{material_bed_temperature_layer_0} ; set and wait for nozzle temp to stabilize\nM109 S{material_print_temperature_layer_0} ; wait for nozzle temp to stabilize\nG28 ;Home\nG1 E10 F3600; push out retracted filament(fix for over retraction after prime)" },
|
|
|
+ "machine_width": { "default_value": 235 },
|
|
|
+ "material_bed_temperature": { "maximum_value_warning": "110" },
|
|
|
+ "material_bed_temperature_layer_0": { "maximum_value_warning": "110" },
|
|
|
+ "material_diameter": { "default_value": 1.75 },
|
|
|
+ "material_final_print_temperature": { "value": "material_print_temperature" },
|
|
|
+ "material_flow_layer_0": { "value": 115 },
|
|
|
+ "material_initial_print_temperature": { "value": "material_print_temperature" },
|
|
|
+ "material_print_temperature": { "maximum_value_warning": "260" },
|
|
|
+ "material_print_temperature_layer_0":
|
|
|
+ {
|
|
|
+ "maximum_value_warning": "270",
|
|
|
+ "value": "material_print_temperature + 5"
|
|
|
+ },
|
|
|
+ "minimum_interface_area": { "value": 10 },
|
|
|
+ "minimum_support_area": { "value": 2 },
|
|
|
+ "retraction_amount": { "default_value": 1.5 },
|
|
|
+ "retraction_combing": { "value": "'off' if retraction_hop_enabled else 'infill'" },
|
|
|
+ "retraction_hop": { "value": 0.2 },
|
|
|
+ "retraction_speed": { "default_value": 60 },
|
|
|
+ "skin_material_flow": { "value": 97 },
|
|
|
+ "skin_monotonic": { "default_value": true },
|
|
|
+ "skirt_line_count": { "value": 3 },
|
|
|
+ "small_hole_max_size": { "value": 10 },
|
|
|
+ "speed_infill": { "maximum_value_warning": 255 },
|
|
|
+ "speed_print":
|
|
|
+ {
|
|
|
+ "maximum_value_warning": 255,
|
|
|
+ "value": 250.0
|
|
|
+ },
|
|
|
+ "speed_support": { "maximum_value_warning": 255 },
|
|
|
+ "speed_support_bottom": { "maximum_value_warning": 255 },
|
|
|
+ "speed_support_infill": { "maximum_value_warning": 255 },
|
|
|
+ "speed_support_interface": { "maximum_value_warning": 255 },
|
|
|
+ "speed_support_roof": { "maximum_value_warning": 255 },
|
|
|
+ "speed_topbottom": { "value": 150.0 },
|
|
|
+ "speed_travel": { "value": 250.0 },
|
|
|
+ "speed_wall":
|
|
|
+ {
|
|
|
+ "maximum_value_warning": 255,
|
|
|
+ "value": 150.0
|
|
|
+ },
|
|
|
+ "speed_wall_x":
|
|
|
+ {
|
|
|
+ "maximum_value_warning": 255,
|
|
|
+ "value": 250.0
|
|
|
+ },
|
|
|
+ "support_angle": { "value": "math.floor(math.degrees(math.atan(line_width / 2.0 /layer_height)))" },
|
|
|
+ "support_brim_width": { "value": 4.0 },
|
|
|
+ "support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
|
|
|
+ "support_interface_density": { "value": 33.333 },
|
|
|
+ "support_interface_enable": { "value": true },
|
|
|
+ "support_interface_pattern": { "value": "'grid'" },
|
|
|
+ "support_interface_skip_height": { "value": 0.2 },
|
|
|
+ "support_roof_enable": { "value": true },
|
|
|
+ "support_xy_distance": { "value": "wall_line_width_0 * 2" },
|
|
|
+ "support_xy_distance_overhang": { "value": "wall_line_width_0" },
|
|
|
+ "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
|
|
|
+ "support_z_distance": { "value": "layer_height * 2" },
|
|
|
+ "top_bottom_thickness": { "value": "layer_height * 4" },
|
|
|
+ "wall_overhang_angle": { "value": 55 },
|
|
|
+ "wall_overhang_speed_factor": { "value": 55 },
|
|
|
+ "zig_zaggify_infill": { "value": "infill_pattern == 'cross' or infill_pattern == 'cross_3d' or infill_pattern == 'lines'" }
|
|
|
+ }
|
|
|
+}
|
just-trey