sort the translations

CURA-10077

resources/i18n/cs_CZ/fdmextruder.def.json.po

@@ -18,14 +18,29 @@ msgstr ""
 "X-Generator: Poedit 2.3\n"
 
 #: /fdmextruder.def.json
-msgctxt "machine_settings label"
-msgid "Machine"
-msgstr "Zařízení"
+msgctxt "platform_adhesion description"
+msgid "Adhesion"
+msgstr "Adheze"
 
 #: /fdmextruder.def.json
-msgctxt "machine_settings description"
-msgid "Machine specific settings"
-msgstr "Specifické nastavení pro zařízení"
+msgctxt "material_diameter description"
+msgid "Adjusts the diameter of the filament used. Match this value with the diameter of the used filament."
+msgstr "Nastavuje průměr použitého vlákna filamentu. Srovnejte tuto hodnotu s průměrem použitého vlákna."
+
+#: /fdmextruder.def.json
+msgctxt "platform_adhesion label"
+msgid "Build Plate Adhesion"
+msgstr "Adheze topné podložky"
+
+#: /fdmextruder.def.json
+msgctxt "material_diameter label"
+msgid "Diameter"
+msgstr "Průměr"
+
+#: /fdmextruder.def.json
+msgctxt "machine_extruder_end_code description"
+msgid "End g-code to execute when switching away from this extruder."
+msgstr "Ukončete g-kód, který se má provést při odpojení od tohoto extrudéru."
 
 #: /fdmextruder.def.json
 msgctxt "extruder_nr label"
@@ -33,196 +48,181 @@ msgid "Extruder"
 msgstr "Extruder"
 
 #: /fdmextruder.def.json
-msgctxt "extruder_nr description"
-msgid "The extruder train used for printing. This is used in multi-extrusion."
-msgstr "Vytlačovací stroj byl použit pro tisknutí. Toto je používáno při vícenásobné extruzi."
-
-#: /fdmextruder.def.json
-msgctxt "machine_nozzle_id label"
-msgid "Nozzle ID"
-msgstr "ID trysky"
+msgctxt "machine_extruder_end_code label"
+msgid "Extruder End G-Code"
+msgstr "Ukončující G kód extruderu"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_id description"
-msgid "The nozzle ID for an extruder train, such as \"AA 0.4\" and \"BB 0.8\"."
-msgstr "ID trysky pro vytlačovací stroj, např. \"AA 0.4\" nebo \"BB 0.8\"."
+msgctxt "machine_extruder_end_pos_abs label"
+msgid "Extruder End Position Absolute"
+msgstr "Absolutní finální pozice extruderu"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_size label"
-msgid "Nozzle Diameter"
-msgstr "Průměr trysky"
+msgctxt "machine_extruder_end_pos_x label"
+msgid "Extruder End Position X"
+msgstr "Konečná pozice X extruderu"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_size description"
-msgid "The inner diameter of the nozzle. Change this setting when using a non-standard nozzle size."
-msgstr "Vnitřní průměr trysky. Změňte toto nastavení pokud používáte nestandardní velikost trysky."
+msgctxt "machine_extruder_end_pos_y label"
+msgid "Extruder End Position Y"
+msgstr "Konečná pozice Y extruderu"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_offset_x label"
-msgid "Nozzle X Offset"
-msgstr "X offset trysky"
+msgctxt "extruder_prime_pos_x label"
+msgid "Extruder Prime X Position"
+msgstr "Primární pozice extruderu X"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_offset_x description"
-msgid "The x-coordinate of the offset of the nozzle."
-msgstr "X-ová souřadnice offsetu trysky."
+msgctxt "extruder_prime_pos_y label"
+msgid "Extruder Prime Y Position"
+msgstr "Primární pozice extruderu Y"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_offset_y label"
-msgid "Nozzle Y Offset"
-msgstr "Y offset trysky"
+msgctxt "extruder_prime_pos_z label"
+msgid "Extruder Prime Z Position"
+msgstr "První Z pozice extruderu"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_offset_y description"
-msgid "The y-coordinate of the offset of the nozzle."
-msgstr "Y-ová souřadnice offsetu trysky."
+msgctxt "machine_extruder_cooling_fan_number label"
+msgid "Extruder Print Cooling Fan"
+msgstr "Chladič extruderu"
 
 #: /fdmextruder.def.json
 msgctxt "machine_extruder_start_code label"
 msgid "Extruder Start G-Code"
 msgstr "Počáteční G kód extruderu"
 
-#: /fdmextruder.def.json
-msgctxt "machine_extruder_start_code description"
-msgid "Start g-code to execute when switching to this extruder."
-msgstr "Spusťte g-kód, který se má provést při přepnutí na tento extrudér."
-
 #: /fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_abs label"
 msgid "Extruder Start Position Absolute"
 msgstr "Absolutní počáteční pozice extruderu"
 
-#: /fdmextruder.def.json
-msgctxt "machine_extruder_start_pos_abs description"
-msgid "Make the extruder starting position absolute rather than relative to the last-known location of the head."
-msgstr "Udělejte počáteční pozici extrudéru absolutně, nikoli relativně k poslednímu známému umístění hlavy."
-
 #: /fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_x label"
 msgid "Extruder Start Position X"
 msgstr "Počáteční pozice extruderu X"
 
-#: /fdmextruder.def.json
-msgctxt "machine_extruder_start_pos_x description"
-msgid "The x-coordinate of the starting position when turning the extruder on."
-msgstr "Souřadnice x počáteční pozice při zapnutí extrudéru."
-
 #: /fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_y label"
 msgid "Extruder Start Position Y"
 msgstr "Počáteční pozice extruderu Y"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_start_pos_y description"
-msgid "The y-coordinate of the starting position when turning the extruder on."
-msgstr "Souřadnice y počáteční pozice při zapnutí extrudéru."
+msgctxt "machine_settings label"
+msgid "Machine"
+msgstr "Zařízení"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_code label"
-msgid "Extruder End G-Code"
-msgstr "Ukončující G kód extruderu"
+msgctxt "machine_settings description"
+msgid "Machine specific settings"
+msgstr "Specifické nastavení pro zařízení"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_code description"
-msgid "End g-code to execute when switching away from this extruder."
-msgstr "Ukončete g-kód, který se má provést při odpojení od tohoto extrudéru."
+msgctxt "machine_extruder_end_pos_abs description"
+msgid "Make the extruder ending position absolute rather than relative to the last-known location of the head."
+msgstr "Koncovou polohu extruderu udělejte absolutně, nikoliv relativně k poslednímu známému umístění hlavy."
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_pos_abs label"
-msgid "Extruder End Position Absolute"
-msgstr "Absolutní finální pozice extruderu"
+msgctxt "machine_extruder_start_pos_abs description"
+msgid "Make the extruder starting position absolute rather than relative to the last-known location of the head."
+msgstr "Udělejte počáteční pozici extrudéru absolutně, nikoli relativně k poslednímu známému umístění hlavy."
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_pos_abs description"
-msgid "Make the extruder ending position absolute rather than relative to the last-known location of the head."
-msgstr "Koncovou polohu extruderu udělejte absolutně, nikoliv relativně k poslednímu známému umístění hlavy."
+msgctxt "material description"
+msgid "Material"
+msgstr "Materiál"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_pos_x label"
-msgid "Extruder End Position X"
-msgstr "Konečná pozice X extruderu"
+msgctxt "material label"
+msgid "Material"
+msgstr "Materiál"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_pos_x description"
-msgid "The x-coordinate of the ending position when turning the extruder off."
-msgstr "Souřadnice x koncové polohy při vypnutí extrudéru."
+msgctxt "machine_nozzle_size label"
+msgid "Nozzle Diameter"
+msgstr "Průměr trysky"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_pos_y label"
-msgid "Extruder End Position Y"
-msgstr "Konečná pozice Y extruderu"
+msgctxt "machine_nozzle_id label"
+msgid "Nozzle ID"
+msgstr "ID trysky"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_pos_y description"
-msgid "The y-coordinate of the ending position when turning the extruder off."
-msgstr "Souřadnice y koncové polohy při vypnutí extrudéru."
+msgctxt "machine_nozzle_offset_x label"
+msgid "Nozzle X Offset"
+msgstr "X offset trysky"
 
 #: /fdmextruder.def.json
-msgctxt "extruder_prime_pos_z label"
-msgid "Extruder Prime Z Position"
-msgstr "První Z pozice extruderu"
+msgctxt "machine_nozzle_offset_y label"
+msgid "Nozzle Y Offset"
+msgstr "Y offset trysky"
 
 #: /fdmextruder.def.json
-msgctxt "extruder_prime_pos_z description"
-msgid "The Z coordinate of the position where the nozzle primes at the start of printing."
-msgstr "Souřadnice Z pozice, ve které tryska naplní tlak na začátku tisku."
+msgctxt "machine_extruder_start_code description"
+msgid "Start g-code to execute when switching to this extruder."
+msgstr "Spusťte g-kód, který se má provést při přepnutí na tento extrudér."
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_cooling_fan_number label"
-msgid "Extruder Print Cooling Fan"
-msgstr "Chladič extruderu"
+msgctxt "extruder_prime_pos_x description"
+msgid "The X coordinate of the position where the nozzle primes at the start of printing."
+msgstr "Souřadnice X polohy, ve které tryska naplní tlak na začátku tisku."
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_cooling_fan_number description"
-msgid "The number of the print cooling fan associated with this extruder. Only change this from the default value of 0 when you have a different print cooling fan for each extruder."
-msgstr "Číslo ventilátoru chlazení tisku přidruženého k tomuto extrudéru. Tuto změnu změňte pouze z výchozí hodnoty 0, pokud máte pro každý extrudér jiný ventilátor chlazení tisku."
+msgctxt "extruder_prime_pos_y description"
+msgid "The Y coordinate of the position where the nozzle primes at the start of printing."
+msgstr "Souřadnice Y polohy, ve které tryska naplní tlak na začátku tisku."
 
 #: /fdmextruder.def.json
-msgctxt "platform_adhesion label"
-msgid "Build Plate Adhesion"
-msgstr "Adheze topné podložky"
+msgctxt "extruder_prime_pos_z description"
+msgid "The Z coordinate of the position where the nozzle primes at the start of printing."
+msgstr "Souřadnice Z pozice, ve které tryska naplní tlak na začátku tisku."
 
 #: /fdmextruder.def.json
-msgctxt "platform_adhesion description"
-msgid "Adhesion"
-msgstr "Adheze"
+msgctxt "extruder_nr description"
+msgid "The extruder train used for printing. This is used in multi-extrusion."
+msgstr "Vytlačovací stroj byl použit pro tisknutí. Toto je používáno při vícenásobné extruzi."
 
 #: /fdmextruder.def.json
-msgctxt "extruder_prime_pos_x label"
-msgid "Extruder Prime X Position"
-msgstr "Primární pozice extruderu X"
+msgctxt "machine_nozzle_size description"
+msgid "The inner diameter of the nozzle. Change this setting when using a non-standard nozzle size."
+msgstr "Vnitřní průměr trysky. Změňte toto nastavení pokud používáte nestandardní velikost trysky."
 
 #: /fdmextruder.def.json
-msgctxt "extruder_prime_pos_x description"
-msgid "The X coordinate of the position where the nozzle primes at the start of printing."
-msgstr "Souřadnice X polohy, ve které tryska naplní tlak na začátku tisku."
+msgctxt "machine_nozzle_id description"
+msgid "The nozzle ID for an extruder train, such as \"AA 0.4\" and \"BB 0.8\"."
+msgstr "ID trysky pro vytlačovací stroj, např. \"AA 0.4\" nebo \"BB 0.8\"."
 
 #: /fdmextruder.def.json
-msgctxt "extruder_prime_pos_y label"
-msgid "Extruder Prime Y Position"
-msgstr "Primární pozice extruderu Y"
+msgctxt "machine_extruder_cooling_fan_number description"
+msgid "The number of the print cooling fan associated with this extruder. Only change this from the default value of 0 when you have a different print cooling fan for each extruder."
+msgstr "Číslo ventilátoru chlazení tisku přidruženého k tomuto extrudéru. Tuto změnu změňte pouze z výchozí hodnoty 0, pokud máte pro každý extrudér jiný ventilátor chlazení tisku."
 
 #: /fdmextruder.def.json
-msgctxt "extruder_prime_pos_y description"
-msgid "The Y coordinate of the position where the nozzle primes at the start of printing."
-msgstr "Souřadnice Y polohy, ve které tryska naplní tlak na začátku tisku."
+msgctxt "machine_extruder_end_pos_x description"
+msgid "The x-coordinate of the ending position when turning the extruder off."
+msgstr "Souřadnice x koncové polohy při vypnutí extrudéru."
 
 #: /fdmextruder.def.json
-msgctxt "material label"
-msgid "Material"
-msgstr "Materiál"
+msgctxt "machine_nozzle_offset_x description"
+msgid "The x-coordinate of the offset of the nozzle."
+msgstr "X-ová souřadnice offsetu trysky."
 
 #: /fdmextruder.def.json
-msgctxt "material description"
-msgid "Material"
-msgstr "Materiál"
+msgctxt "machine_extruder_start_pos_x description"
+msgid "The x-coordinate of the starting position when turning the extruder on."
+msgstr "Souřadnice x počáteční pozice při zapnutí extrudéru."
 
 #: /fdmextruder.def.json
-msgctxt "material_diameter label"
-msgid "Diameter"
-msgstr "Průměr"
+msgctxt "machine_extruder_end_pos_y description"
+msgid "The y-coordinate of the ending position when turning the extruder off."
+msgstr "Souřadnice y koncové polohy při vypnutí extrudéru."
 
 #: /fdmextruder.def.json
-msgctxt "material_diameter description"
-msgid "Adjusts the diameter of the filament used. Match this value with the diameter of the used filament."
-msgstr "Nastavuje průměr použitého vlákna filamentu. Srovnejte tuto hodnotu s průměrem použitého vlákna."
+msgctxt "machine_nozzle_offset_y description"
+msgid "The y-coordinate of the offset of the nozzle."
+msgstr "Y-ová souřadnice offsetu trysky."
+
+#: /fdmextruder.def.json
+msgctxt "machine_extruder_start_pos_y description"
+msgid "The y-coordinate of the starting position when turning the extruder on."
+msgstr "Souřadnice y počáteční pozice při zapnutí extrudéru."

resources/i18n/cura.pot

@@ -1,7015 +0,0 @@
-# Cura
-# Copyright (C) 2022 UltiMaker.
-# This file is distributed under the same license as the Cura package.
-# Ultimaker <plugins@ultimaker.com>, 2022.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-09-27 14:50+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Support"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/PrintInformation.py:97
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/PrintInformation.py:98
-msgctxt "@tooltip"
-msgid "Other"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/TextManager.py:37
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/TextManager.py:63
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/WelcomePagesModel.py:57
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/WelcomePagesModel.py:286
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/WhatsNewPagesModel.py:68
-msgctxt "@action:button"
-msgid "Skip"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/WelcomePagesModel.py:290
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
-msgctxt "@action:button"
-msgid "Add"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:323
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:147
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:509
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/RenameDialog.qml:74
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ColorDialog.qml:139
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UI/WhatsNewPagesModel.py:76
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:444
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:175
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:188
-msgctxt "@action:button"
-msgid "Close"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/ContainerManager.py:207
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/ContainerManager.py:208
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:141
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid ""
-"The file <filename>{0}</filename> already exists. Are you sure you want to "
-"overwrite it?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/ContainerManager.py:459
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/ContainerManager.py:462
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/MachineManager.py:745
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:219
-msgctxt "@label"
-msgid "Nozzle"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/MachineManager.py:889
-msgctxt "@info:message Followed by a list of settings."
-msgid ""
-"Settings have been changed to match the current availability of extruders:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/MachineManager.py:890
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/MachineManager.py:1512
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid ""
-"Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:156
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:166
-#: /Users/c.lamboo/ultimaker/Cura/cura/CuraApplication.py:1829
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
-msgctxt "@info:title"
-msgid "Error"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid ""
-"Failed to export profile to <filename>{0}</filename>: Writer plugin reported "
-"failure."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:173
-msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid ""
-"Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:252
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid ""
-"This profile <filename>{0}</filename> contains incorrect data, could not "
-"import it."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:369
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:483
-#, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"Quality type '{0}' is not compatible with the current active machine "
-"definition '{1}'."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Settings/CuraContainerRegistry.py:488
-#, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"Warning: The profile is not visible because its quality type '{0}' is not "
-"available for the current configuration. Switch to a material/nozzle "
-"combination that can use this quality type."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/MultiplyObjectsJob.py:99
-#: /Users/c.lamboo/ultimaker/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CuraApplication.py:540
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CuraApplication.py:547
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CuraApplication.py:692
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CuraApplication.py:838
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CuraApplication.py:852
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CuraApplication.py:920
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CuraApplication.py:956
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CuraApplication.py:961
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CuraApplication.py:1289
-#, python-format
-msgctxt ""
-"@info 'width', 'depth' and 'height' are variable names that must NOT be "
-"translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CuraApplication.py:1815
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CuraApplication.py:1817
-#: /Users/c.lamboo/ultimaker/Cura/cura/OAuth2/AuthorizationService.py:217
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:189
-msgctxt "@info:title"
-msgid "Warning"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CuraApplication.py:1827
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid ""
-"Unable to start a new sign in process. Check if another sign in attempt is "
-"still active."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the UltiMaker account server."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Arranging/ArrangeObjectsJob.py:25
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Arranging/ArrangeObjectsJob.py:29
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Arranging/ArrangeObjectsJob.py:43
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/QualityManagementModel.py:338
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentSelectionModel.py:61
-msgctxt "@label"
-msgid "Default"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentTranslations.py:14
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentSelectionModel.py:65
-msgctxt "@label"
-msgid "Visual"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentTranslations.py:15
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentSelectionModel.py:66
-msgctxt "@text"
-msgid ""
-"The visual profile is designed to print visual prototypes and models with "
-"the intent of high visual and surface quality."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentTranslations.py:18
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentSelectionModel.py:70
-msgctxt "@label"
-msgid "Engineering"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentTranslations.py:19
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentSelectionModel.py:71
-msgctxt "@text"
-msgid ""
-"The engineering profile is designed to print functional prototypes and end-"
-"use parts with the intent of better accuracy and for closer tolerances."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentTranslations.py:22
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentSelectionModel.py:75
-msgctxt "@label"
-msgid "Draft"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentTranslations.py:23
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/IntentSelectionModel.py:76
-msgctxt "@text"
-msgid ""
-"The draft profile is designed to print initial prototypes and concept "
-"validation with the intent of significant print time reduction."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/QualitySettingsModel.py:182
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/QualityManagementModel.py:391
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/QualityManagementModel.py:426
-#, python-brace-format
-msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/QualityManagementModel.py:427
-msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-msgctxt "@label"
-msgid "Unknown"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid ""
-"The printer(s) below cannot be connected because they are part of a group"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/GlobalStacksModel.py:160
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
-msgctxt "@label"
-msgid "Connected printers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/GlobalStacksModel.py:160
-msgctxt "@label"
-msgid "Preset printers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/GlobalStacksModel.py:165
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/MaterialManagementModel.py:232
-msgctxt "@label"
-msgid "Custom Material"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Machines/Models/MaterialManagementModel.py:233
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:340
-msgctxt "@label"
-msgid "Custom"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/API/Account.py:199
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
-msgctxt "@action:button"
-msgid ""
-"Please sync the material profiles with your printers before starting to "
-"print."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
-msgctxt "@action:button"
-msgid "New materials installed"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
-msgctxt "@action:button"
-msgid "Sync materials"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.py:397
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SolidView/SolidView.py:80
-msgctxt "@action:button"
-msgid "Learn more"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
-#: /Users/c.lamboo/ultimaker/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
-#: /Users/c.lamboo/ultimaker/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
-#: /Users/c.lamboo/ultimaker/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid ""
-"Failed to connect to Digital Factory to sync materials with some of the "
-"printers."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/BuildVolume.py:100
-msgctxt "@info:status"
-msgid ""
-"The build volume height has been reduced due to the value of the \"Print "
-"Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/BuildVolume.py:103
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Backups/Backup.py:122
-#: /Users/c.lamboo/ultimaker/Cura/cura/Backups/Backup.py:159
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:107
-msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, UltiMaker Cura has encountered something that doesn't seem right."
-"</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start "
-"up. It was possibly caused by some incorrect configuration files. We suggest "
-"to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</"
-"p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</"
-"p>\n"
-"                "
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:122
-msgctxt "@action:button"
-msgid "Send crash report to UltiMaker"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:140
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report "
-"to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report "
-"automatically to our servers</p>\n"
-"        "
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:304
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:390
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/cura/CrashHandler.py:418
-msgctxt "@action:button"
-msgid "Send report"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/X3DReader/__init__.py:13
-msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-msgctxt "@info:status"
-msgid "There are no file formats available to write with!"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/NewPrinterDetectedMessage.py:13
-msgctxt "info:status"
-msgid "New printer detected from your UltiMaker account"
-msgid_plural "New printers detected from your UltiMaker account"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/NewPrinterDetectedMessage.py:29
-#, python-brace-format
-msgctxt "info:status Filled in with printer name and printer model."
-msgid "Adding printer {name} ({model}) from your account"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/NewPrinterDetectedMessage.py:48
-#, python-brace-format
-msgctxt "info:{0} gets replaced by a number of printers"
-msgid "... and {0} other"
-msgid_plural "... and {0} others"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/NewPrinterDetectedMessage.py:57
-msgctxt "info:status"
-msgid "Printers added from Digital Factory:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
-msgctxt "@info:status"
-msgid "Please wait until the current job has been sent."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
-msgctxt "@info:title"
-msgid "Print error"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
-#, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"Your printer <b>{printer_name}</b> could be connected via cloud.\n"
-" Manage your print queue and monitor your prints from anywhere connecting "
-"your printer to Digital Factory"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
-msgctxt "@info:title"
-msgid "Are you ready for cloud printing?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
-msgctxt "@action"
-msgid "Get started"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobAwaitingApprovalMessage.py:24
-msgctxt "@action"
-msgid "Learn more"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobAwaitingApprovalMessage.py:18
-msgctxt "@info:status"
-msgid ""
-"You will receive a confirmation via email when the print job is approved"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobAwaitingApprovalMessage.py:19
-msgctxt "@info:title"
-msgid "The print job was successfully submitted"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobAwaitingApprovalMessage.py:22
-msgctxt "@action"
-msgid "Manage print jobs"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"Cura has detected material profiles that were not yet installed on the host "
-"printer of group {0}."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"You are attempting to connect to {0} but it is not the host of a group. You "
-"can visit the web page to configure it as a group host."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:16
-msgctxt "info:status"
-msgid "This printer is not linked to the Digital Factory:"
-msgid_plural "These printers are not linked to the Digital Factory:"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:22
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
-msgctxt "info:name"
-msgid "Ultimaker Digital Factory"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:28
-#, python-brace-format
-msgctxt "info:status"
-msgid "To establish a connection, please visit the {website_link}"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:32
-msgctxt "info:status"
-msgid "A cloud connection is not available for a printer"
-msgid_plural "A cloud connection is not available for some printers"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:40
-msgctxt "@action:button"
-msgid "Keep printer configurations"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:45
-msgctxt "@action:button"
-msgid "Remove printers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid ""
-"You are attempting to connect to a printer that is not running UltiMaker "
-"Connect. Please update the printer to the latest firmware."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
-msgctxt "@info:status"
-msgid "Print job was successfully sent to the printer."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
-msgctxt "@info:title"
-msgid "Data Sent"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:62
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:63
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:64
-msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Cloud/AbstractCloudOutputDevice.py:80
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:162
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Cloud/AbstractCloudOutputDevice.py:81
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:163
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Cloud/AbstractCloudOutputDevice.py:82
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:164
-msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:425
-#, python-brace-format
-msgctxt "@message {printer_name} is replaced with the name of the printer"
-msgid "{printer_name} will be removed until the next account sync."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:426
-#, python-brace-format
-msgctxt "@message {printer_name} is replaced with the name of the printer"
-msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:427
-#, python-brace-format
-msgctxt "@message {printer_name} is replaced with the name of the printer"
-msgid "Are you sure you want to remove {printer_name} temporarily?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:474
-msgctxt "@title:window"
-msgid "Remove printers?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:477
-#, python-brace-format
-msgctxt "@label"
-msgid ""
-"You are about to remove {0} printer from Cura. This action cannot be "
-"undone.\n"
-"Are you sure you want to continue?"
-msgid_plural ""
-"You are about to remove {0} printers from Cura. This action cannot be "
-"undone.\n"
-"Are you sure you want to continue?"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:484
-msgctxt "@label"
-msgid ""
-"You are about to remove all printers from Cura. This action cannot be "
-"undone.\n"
-"Are you sure you want to continue?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:276
-msgctxt "@action:button"
-msgid "Monitor print"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:278
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:298
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFWriter/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFWriter/ThreeMFWriter.py:240
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
-msgctxt "@error"
-msgid "There is no workspace yet to write. Please add a printer first."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
-msgctxt "@error:zip"
-msgid ""
-"The operating system does not allow saving a project file to this location "
-"or with this file name."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
-msgctxt "@info:title"
-msgid "Backups"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
-msgctxt "@text"
-msgid "Unable to read example data file."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UFPWriter/UFPWriter.py:62
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UFPWriter/UFPWriter.py:78
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UFPWriter/UFPWriter.py:91
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UFPWriter/UFPWriter.py:113
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UFPWriter/UFPWriter.py:168
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UFPWriter/UFPWriter.py:178
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UFPWriter/__init__.py:28
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UFPReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "UltiMaker Format Package"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/DigitalLibrary/src/DigitalFactoryProjectResponse.py:19
-msgctxt "@text Placeholder for the username if it has been deleted"
-msgid "deleted user"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /Users/c.lamboo/ultimaker/Cura/plugins/GCodeReader/__init__.py:14
-#: /Users/c.lamboo/ultimaker/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/GCodeReader/FlavorParser.py:350
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/GCodeReader/FlavorParser.py:352
-#: /Users/c.lamboo/ultimaker/Cura/plugins/GCodeReader/FlavorParser.py:506
-msgctxt "@info:title"
-msgid "G-code Details"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/GCodeReader/FlavorParser.py:504
-msgctxt "@info:generic"
-msgid ""
-"Make sure the g-code is suitable for your printer and printer configuration "
-"before sending the file to it. The g-code representation may not be accurate."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /Users/c.lamboo/ultimaker/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/RemotePackageList.py:117
-msgctxt "@info:error"
-msgid "Could not interpret the server's response."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/RemotePackageList.py:148
-msgctxt "@info:error"
-msgid "Could not reach Marketplace."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/CloudSync/LicensePresenter.py:42
-msgctxt "@button"
-msgid "Decline and remove from account"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/CloudSync/LicenseModel.py:12
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:79
-msgctxt "@button"
-msgid "Decline"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/CloudSync/LicenseModel.py:13
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
-msgctxt "@button"
-msgid "Agree"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/CloudSync/LicenseModel.py:77
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/CloudSync/CloudPackageChecker.py:144
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/CloudSync/CloudPackageChecker.py:145
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/CloudSync/DownloadPresenter.py:95
-msgctxt "@info:title"
-msgid "Changes detected from your UltiMaker account"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/CloudSync/CloudPackageChecker.py:147
-msgctxt "@action:button"
-msgid "Sync"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/CloudSync/RestartApplicationPresenter.py:22
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/LocalPackageList.py:28
-msgctxt "@label"
-msgid "Installed Plugins"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/LocalPackageList.py:29
-msgctxt "@label"
-msgid "Installed Materials"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/LocalPackageList.py:33
-msgctxt "@label"
-msgid "Bundled Plugins"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/LocalPackageList.py:34
-msgctxt "@label"
-msgid "Bundled Materials"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/PackageModel.py:43
-msgctxt "@label:property"
-msgid "Unknown Package"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/PackageModel.py:66
-msgctxt "@label:property"
-msgid "Unknown Author"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Save to Removable Drive"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
-#, python-brace-format
-msgctxt "@item:inlistbox"
-msgid "Save to Removable Drive {0}"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
-#, python-brace-format
-msgctxt "@info:progress Don't translate the XML tags <filename>!"
-msgid "Saving to Removable Drive <filename>{0}</filename>"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:110
-msgctxt "@info:title"
-msgid "Saving"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:120
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:123
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
-#, python-brace-format
-msgctxt "@info:status Don't translate the tag {device}!"
-msgid "Could not find a file name when trying to write to {device}."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:152
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:171
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Could not save to removable drive {0}: {1}"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:162
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Saved to Removable Drive {0} as {1}"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
-msgctxt "@info:title"
-msgid "File Saved"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
-msgctxt "@action:button"
-msgid "Eject"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
-#, python-brace-format
-msgctxt "@action"
-msgid "Eject removable device {0}"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:184
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Ejected {0}. You can now safely remove the drive."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:185
-msgctxt "@info:title"
-msgid "Safely Remove Hardware"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:188
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Failed to eject {0}. Another program may be using the drive."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message"
-msgid ""
-"Slicing failed with an unexpected error. Please consider reporting a bug on "
-"our issue tracker."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:163
-msgctxt "@message:title"
-msgid "Slicing failed"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:button"
-msgid "Report a bug"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:169
-msgctxt "@message:description"
-msgid "Report a bug on UltiMaker Cura's issue tracker."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:401
-msgctxt "@info:status"
-msgid ""
-"Unable to slice with the current material as it is incompatible with the "
-"selected machine or configuration."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:402
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:435
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:462
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:474
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:486
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:499
-msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:434
-#, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"Unable to slice with the current settings. The following settings have "
-"errors: {0}"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:461
-#, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"Unable to slice due to some per-model settings. The following settings have "
-"errors on one or more models: {error_labels}"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:473
-msgctxt "@info:status"
-msgid ""
-"Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:485
-#, python-format
-msgctxt "@info:status"
-msgid ""
-"Unable to slice because there are objects associated with disabled Extruder "
-"%s."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:495
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
-msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
-msgctxt "@info:title"
-msgid "Information"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/__init__.py:27
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.py:212
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.py:214
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.py:390
-msgctxt "@info:status"
-msgid ""
-"The material used in this project relies on some material definitions not "
-"available in Cura, this might produce undesirable print results. We highly "
-"recommend installing the full material package from the Marketplace."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.py:392
-msgctxt "@info:title"
-msgid "Material profiles not installed"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.py:405
-msgctxt "@action:button"
-msgid "Install Materials"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid ""
-"Project file <filename>{0}</filename> contains an unknown machine type "
-"<message>{1}</message>. Cannot import the machine. Models will be imported "
-"instead."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:548
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid ""
-"Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}"
-"</message>."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:659
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:678
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:658
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:676
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid ""
-"Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:723
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid ""
-"Project file <filename>{0}</filename> is made using profiles that are "
-"unknown to this version of UltiMaker Cura."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ModelChecker/ModelChecker.py:97
-#, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and "
-"material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</"
-"p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality "
-"guide</a></p>"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid ""
-"A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
-msgctxt "@message"
-msgid ""
-"A print is still in progress. Cura cannot start another print via USB until "
-"the previous print has completed."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/GCodeWriter/GCodeWriter.py:75
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/GCodeWriter/GCodeWriter.py:81
-#: /Users/c.lamboo/ultimaker/Cura/plugins/GCodeWriter/GCodeWriter.py:97
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationView.py:129
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationView.py:130
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationView.py:133
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationView.py:134
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationView.py:136
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SolidView/SolidView.py:71
-msgctxt "@info:status"
-msgid ""
-"The highlighted areas indicate either missing or extraneous surfaces. Fix "
-"your model and open it again into Cura."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:title"
-msgid "Model Errors"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt ""
-"@info Don't translate {machine_name}, since it gets replaced by a printer "
-"name!"
-msgid ""
-"New features or bug-fixes may be available for your {machine_name}! If you "
-"haven't done so already, it is recommended to update the firmware on your "
-"printer to version {latest_version}."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:68
-msgctxt "@label"
-msgid "X (Width)"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:72
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:87
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:102
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:78
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:92
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:108
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:123
-msgctxt "@label"
-msgid "mm"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:83
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:98
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:112
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:125
-msgctxt "@label"
-msgid "Origin at center"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:137
-msgctxt "@label"
-msgid "Heated bed"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:149
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:161
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:185
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:197
-msgctxt "@label"
-msgid "X min"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:217
-msgctxt "@label"
-msgid "Y min"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:237
-msgctxt "@label"
-msgid "X max"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:257
-msgctxt "@label"
-msgid "Y max"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:275
-msgctxt "@label"
-msgid "Gantry Height"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:289
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:341
-msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:389
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:400
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:74
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:88
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:104
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:119
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:134
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:14
-msgctxt "@title:window"
-msgid "Convert Image"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:66
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:90
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:100
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:124
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:134
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:158
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:187
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:188
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid ""
-"For lithophanes dark pixels should correspond to thicker locations in order "
-"to block more light coming through. For height maps lighter pixels signify "
-"higher terrain, so lighter pixels should correspond to thicker locations in "
-"the generated 3D model."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:205
-msgctxt "@action:label"
-msgid "Color Model"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:224
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:225
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:232
-msgctxt "@info:tooltip"
-msgid ""
-"For lithophanes a simple logarithmic model for translucency is available. "
-"For height maps the pixel values correspond to heights linearly."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:242
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:263
-msgctxt "@info:tooltip"
-msgid ""
-"The percentage of light penetrating a print with a thickness of 1 "
-"millimeter. Lowering this value increases the contrast in dark regions and "
-"decreases the contrast in light regions of the image."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:274
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:298
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/ImageReader/ConfigUI.qml:329
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:136
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/RenameDialog.qml:80
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ColorDialog.qml:143
-msgctxt "@action:button"
-msgid "OK"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:215
-msgctxt "@action"
-msgid "Add a script"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:251
-msgctxt "@label"
-msgid "Settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:460
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:464
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
-msgctxt "@label"
-msgid "Move to top"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:155
-msgctxt "@label"
-msgid "Delete"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:186
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/MonitorButton.qml:284
-msgctxt "@label"
-msgid "Resume"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:188
-msgctxt "@label"
-msgid "Pausing..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:190
-msgctxt "@label"
-msgid "Resuming..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:192
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/MonitorButton.qml:279
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/MonitorButton.qml:288
-msgctxt "@label"
-msgid "Pause"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:206
-msgctxt "@label"
-msgid "Aborting..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:206
-msgctxt "@label"
-msgid "Abort"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:218
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to move %1 to the top of the queue?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:219
-msgctxt "@window:title"
-msgid "Move print job to top"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:227
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to delete %1?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:228
-msgctxt "@window:title"
-msgid "Delete print job"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:236
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to abort %1?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:237
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/MonitorButton.qml:326
-msgctxt "@window:title"
-msgid "Abort print"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
-msgctxt "@action:button"
-msgid "Print"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
-msgctxt "@label"
-msgid "Printer selection"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
-msgctxt "@action:button"
-msgid "Override"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural ""
-"The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
-msgctxt "@label"
-msgid ""
-"The printer %1 is assigned, but the job contains an unknown material "
-"configuration."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
-msgctxt "@label"
-msgid ""
-"Override will use the specified settings with the existing printer "
-"configuration. This may result in a failed print."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:181
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:178
-msgctxt "@label"
-msgid "Glass"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
-msgctxt "@label"
-msgid "Aluminum"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
-msgctxt "@label link to Connect and Cloud interfaces"
-msgid "Manage printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:253
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:479
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:287
-msgctxt "@info"
-msgid ""
-"Webcam feeds for cloud printers cannot be viewed from UltiMaker Cura. Click "
-"\"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
-msgctxt "@label:status"
-msgid "Loading..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
-msgctxt "@label:status"
-msgid "Unavailable"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:355
-msgctxt "@label:status"
-msgid "Unreachable"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:359
-msgctxt "@label:status"
-msgid "Idle"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:363
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:368
-msgctxt "@label:status"
-msgid "Printing"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:409
-msgctxt "@label"
-msgid "Untitled"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:424
-msgctxt "@label"
-msgid "Anonymous"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:445
-msgctxt "@label:status"
-msgid "Requires configuration changes"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:459
-msgctxt "@action:button"
-msgid "Details"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
-msgctxt "@label"
-msgid "First available"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorStage.qml:117
-msgctxt "@info"
-msgid "Monitor your printers from everywhere using Ultimaker Digital Factory"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorStage.qml:129
-msgctxt "@button"
-msgid "View printers in Digital Factory"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
-msgctxt "@title:window"
-msgid "Connect to Networked Printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
-msgctxt "@label"
-msgid ""
-"To print directly to your printer over the network, please make sure your "
-"printer is connected to the network using a network cable or by connecting "
-"your printer to your WIFI network. If you don't connect Cura with your "
-"printer, you can still use a USB drive to transfer g-code files to your "
-"printer."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
-msgctxt "@label"
-msgid "Select your printer from the list below:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
-msgctxt "@action:button"
-msgid "Edit"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/MachinesPage.qml:148
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:321
-msgctxt "@action:button"
-msgid "Remove"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
-msgctxt "@action:button"
-msgid "Refresh"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
-msgctxt "@label"
-msgid ""
-"If your printer is not listed, read the <a href='%1'>network printing "
-"troubleshooting guide</a>"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:247
-msgctxt "@label"
-msgid "Type"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:256
-msgctxt "@label"
-msgid "Firmware version"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:266
-msgctxt "@label"
-msgid "Address"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
-msgctxt "@label"
-msgid "This printer is not set up to host a group of printers."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
-msgctxt "@label"
-msgid "This printer is the host for a group of %1 printers."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
-msgctxt "@label"
-msgid "The printer at this address has not yet responded."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
-msgctxt "@action:button"
-msgid "Connect"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
-msgctxt "@title:window"
-msgid "Invalid IP address"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:141
-msgctxt "@text"
-msgid "Please enter a valid IP address."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
-msgctxt "@title:window"
-msgid "Printer Address"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:97
-msgctxt "@label"
-msgid "Enter the IP address of your printer on the network."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
-msgctxt "@label"
-msgid "Queued"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:64
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:91
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "Print jobs"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:108
-msgctxt "@label"
-msgid "Total print time"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:117
-msgctxt "@label"
-msgid "Waiting for"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
-msgctxt "@label:status"
-msgid "Finished"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Failed"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Paused"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Action required"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
-msgctxt "@button"
-msgid "Restore"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
-msgctxt "@dialog:info"
-msgid ""
-"You will need to restart Cura before your backup is restored. Do you want to "
-"close Cura now?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:36
-msgctxt "@empty_state"
-msgid ""
-"You don't have any backups currently. Use the 'Backup Now' button to create "
-"one."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:55
-msgctxt "@backup_limit_info"
-msgid ""
-"During the preview phase, you'll be limited to 5 visible backups. Remove a "
-"backup to see older ones."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:180
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/CloudContent.qml:212
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Account/GeneralOperations.qml:49
-msgctxt "@button"
-msgid "Sign in"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:16
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:73
-msgctxt "@text:window"
-msgid ""
-"UltiMaker Cura collects anonymous data in order to improve the print quality "
-"and user experience. Below is an example of all the data that is shared:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:107
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:116
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/DigitalLibrary/resources/qml/SaveProjectFilesPage.qml:216
-msgctxt "@option"
-msgid "Save Cura project and print file"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/DigitalLibrary/resources/qml/SaveProjectFilesPage.qml:217
-msgctxt "@option"
-msgid "Save Cura project"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this UltiMaker Original"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:39
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:42
-msgctxt "@label"
-msgid ""
-"To make sure your prints will come out great, you can now adjust your "
-"buildplate. When you click 'Move to Next Position' the nozzle will move to "
-"the different positions that can be adjusted."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:52
-msgctxt "@label"
-msgid ""
-"For every position; insert a piece of paper under the nozzle and adjust the "
-"print build plate height. The print build plate height is right when the "
-"paper is slightly gripped by the tip of the nozzle."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:67
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:79
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:172
-msgctxt "@label Is followed by the name of an author"
-msgid "By"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:207
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/OnboardBanner.qml:101
-msgctxt "@button:label"
-msgid "Learn More"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:226
-msgctxt "@button"
-msgid "Enable"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:226
-msgctxt "@button"
-msgid "Disable"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:244
-msgctxt "@button"
-msgid "Downgrading..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:245
-msgctxt "@button"
-msgid "Downgrade"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:249
-msgctxt "@button"
-msgid "Installing..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:250
-msgctxt "@button"
-msgid "Install"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:254
-msgctxt "@button"
-msgid "Uninstall"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:269
-msgctxt "@button"
-msgid "Updating..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:269
-msgctxt "@button"
-msgid "Update"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
-msgctxt "@header"
-msgid "Install Plugins"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
-msgctxt "@text"
-msgid ""
-"Streamline your workflow and customize your UltiMaker Cura experience with "
-"plugins contributed by our amazing community of users."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:15
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:24
-msgctxt "@button"
-msgid "Dismiss"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:24
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:76
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:175
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:118
-msgctxt "@button"
-msgid "Next"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:94
-msgctxt "@label"
-msgid ""
-"The following packages can not be installed because of an incompatible Cura "
-"version:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/MultipleLicenseDialog.qml:35
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:15
-msgctxt "@button"
-msgid "Plugin license agreement"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:47
-msgctxt "@text"
-msgid "Please read and agree with the plugin licence."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:70
-msgctxt "@button"
-msgid "Accept"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/MissingPackages.qml:8
-msgctxt "@header"
-msgid "Install Materials"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
-msgctxt "@text"
-msgid ""
-"Select and install material profiles optimised for your UltiMaker 3D "
-"printers."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
-msgctxt "@info:tooltip"
-msgid "Manage packages"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:81
-msgctxt "@header"
-msgid "Description"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:110
-msgctxt "@header"
-msgid "Compatible printers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:134
-msgctxt "@info"
-msgid "No compatibility information"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:152
-msgctxt "@header"
-msgid "Compatible support materials"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:176
-msgctxt "@info No materials"
-msgid "None"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:193
-msgctxt "@header"
-msgid "Compatible with Material Station"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:202
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:228
-msgctxt "@info"
-msgid "Yes"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:202
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:228
-msgctxt "@info"
-msgid "No"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:219
-msgctxt "@header"
-msgid "Optimized for Air Manager"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:243
-msgctxt "@button"
-msgid "Visit plug-in website"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:243
-msgctxt "@button"
-msgid "Website"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:252
-msgctxt "@button"
-msgid "Buy spool"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:261
-msgctxt "@button"
-msgid "Safety datasheet"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:270
-msgctxt "@button"
-msgid "Technical datasheet"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
-msgctxt "@header"
-msgid "Package details"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
-msgctxt "@button:tooltip"
-msgid "Back"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/Packages.qml:151
-msgctxt "@button"
-msgid "Failed to load packages:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/Packages.qml:151
-msgctxt "@button"
-msgid "Retry?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/Packages.qml:167
-msgctxt "@button"
-msgid "Loading"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/Packages.qml:183
-msgctxt "@message"
-msgid "No more results to load"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/Packages.qml:183
-msgctxt "@message"
-msgid "No results found with current filter"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/Packages.qml:226
-msgctxt "@button"
-msgid "Load more"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
-msgctxt "@info"
-msgid "UltiMaker Verified Plug-in"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
-msgctxt "@info"
-msgid "UltiMaker Certified Material"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
-msgctxt "@info"
-msgid "UltiMaker Verified Package"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
-msgctxt "@header"
-msgid "Manage packages"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
-msgctxt "@text"
-msgid ""
-"Manage your UltiMaker Cura plugins and material profiles here. Make sure to "
-"keep your plugins up to date and backup your setup regularly."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/InstallMissingPackagesDialog.qml:15
-msgctxt "@title"
-msgid "Install missing Materials"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:87
-msgctxt "@title"
-msgid "Loading..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:148
-msgctxt "@button"
-msgid "Plugins"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:156
-msgctxt "@button"
-msgid "Materials"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:193
-msgctxt "@info"
-msgid "Search in the browser"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:271
-msgctxt "@button"
-msgid "In order to use the package you will need to restart Cura"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:279
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MonitorStage/MonitorMain.qml:113
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MonitorStage/MonitorMain.qml:148
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/MonitorStage/MonitorMain.qml:164
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:64
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:65
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:83
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:61
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:109
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:165
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:176
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:106
-msgctxt "@action:label"
-msgid "Type"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:193
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:218
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:240
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:222
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:251
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:376
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:246
-msgctxt "@action:label"
-msgid "Name"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:269
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:263
-msgctxt "@action:label"
-msgid "Intent"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:230
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:293
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:235
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:306
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:334
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:361
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:406
-msgctxt "@action:label"
-msgid "Mode"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:422
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:427
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:448
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:490
-msgctxt "@label"
-msgid ""
-"The material used in this project is currently not installed in Cura.<br/"
-">Install the material profile and reopen the project."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:515
-msgctxt "@action:button"
-msgid "Open"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:521
-msgctxt "@action:button"
-msgid "Open project anyway"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/3MFReader/WorkspaceDialog.qml:530
-msgctxt "@action:button"
-msgid "Install missing material"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
-msgctxt "@label"
-msgid "Normal model"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
-msgctxt "@label"
-msgid "Print as support"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
-msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
-msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:102
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
-msgctxt "@label"
-msgid ""
-"Firmware is the piece of software running directly on your 3D printer. This "
-"firmware controls the step motors, regulates the temperature and ultimately "
-"makes your printer work."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
-msgctxt "@label"
-msgid ""
-"The firmware shipping with new printers works, but new versions tend to have "
-"more features and improvements."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
-msgctxt "@label"
-msgid ""
-"Firmware can not be updated because there is no connection with the printer."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
-msgctxt "@label"
-msgid ""
-"Firmware can not be updated because the connection with the printer does not "
-"support upgrading firmware."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
-msgctxt "@title:window"
-msgid "Select custom firmware"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:113
-msgctxt "@title:window"
-msgid "Firmware Update"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:137
-msgctxt "@label"
-msgid "Updating firmware."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:139
-msgctxt "@label"
-msgid "Firmware update completed."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:141
-msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
-msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
-msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
-msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:18
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:47
-msgctxt "@label"
-msgid "Color scheme"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:104
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:108
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:112
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:116
-msgctxt "@label:listbox"
-msgid "Layer Thickness"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:120
-msgctxt "@label:listbox"
-msgid "Line Width"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:124
-msgctxt "@label:listbox"
-msgid "Flow"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:164
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:231
-msgctxt "@label"
-msgid "Travels"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
-msgctxt "@label"
-msgid "Helpers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
-msgctxt "@label"
-msgid "Shell"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:74
-msgctxt "@label"
-msgid "Infill"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
-msgctxt "@label"
-msgid "Starts"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:304
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:313
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:330
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:397
-msgctxt "@label"
-msgid "min"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:462
-msgctxt "@label"
-msgid "max"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/SearchBar.qml:17
-msgctxt "@placeholder"
-msgid "Search"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Settings/SettingItem.qml:84
-msgctxt "@label"
-msgid ""
-"This setting is not used because all the settings that it influences are "
-"overridden."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Settings/SettingItem.qml:89
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Settings/SettingItem.qml:94
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Settings/SettingItem.qml:190
-msgctxt "@label"
-msgid ""
-"This setting is always shared between all extruders. Changing it here will "
-"change the value for all extruders."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Settings/SettingItem.qml:194
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Settings/SettingItem.qml:234
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Settings/SettingItem.qml:334
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value "
-"set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Settings/SettingView.qml:48
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Settings/SettingView.qml:395
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Settings/SettingView.qml:404
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Settings/SettingView.qml:440
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Settings/SettingView.qml:457
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Settings/SettingView.qml:476
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:467
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Settings/SettingCategory.qml:115
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated "
-"value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
-msgctxt "@title:window"
-msgid "New project"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
-msgctxt "@info:question"
-msgid ""
-"Are you sure you want to start a new project? This will clear the build "
-"plate and any unsaved settings."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:24
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:134
-msgctxt "@action:button"
-msgid "Defaults"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:55
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:18
-msgctxt "@title:window"
-msgid "Sync materials with printers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:49
-msgctxt "@title:header"
-msgid "Sync materials with printers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:55
-msgctxt "@text"
-msgid ""
-"Following a few simple steps, you will be able to synchronize all your "
-"material profiles with your printers."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
-msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:86
-msgctxt "@button"
-msgid "Start"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:144
-msgctxt "@title:header"
-msgid "Sign in"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:150
-msgctxt "@text"
-msgid ""
-"To automatically sync the material profiles with all your printers connected "
-"to Digital Factory you need to be signed in in Cura."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:174
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:462
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:602
-msgctxt "@button"
-msgid "Sync materials with USB"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:221
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:258
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:445
-msgctxt "@button"
-msgid "Troubleshooting"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:422
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:424
-msgctxt "@text"
-msgid ""
-"Make sure all your printers are turned ON and connected to Digital Factory."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:433
-msgctxt "@button"
-msgid "Refresh List"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:473
-msgctxt "@button"
-msgid "Try again"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:477
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:712
-msgctxt "@button"
-msgid "Done"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:479
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:622
-msgctxt "@button"
-msgid "Sync"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:535
-msgctxt "@button"
-msgid "Syncing"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:553
-msgctxt "@title:header"
-msgid "No printers found"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:574
-msgctxt "@text"
-msgid ""
-"It seems like you don't have any compatible printers connected to Digital "
-"Factory. Make sure your printer is connected and it's running the latest "
-"firmware."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:585
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:613
-msgctxt "@button"
-msgid "Refresh"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:642
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:648
-msgctxt ""
-"@text In the UI this is followed by a list of steps the user needs to take."
-msgid ""
-"Follow the following steps to load the new material profiles to your printer."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
-msgctxt "@text"
-msgid "Click the export material archive button."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
-msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
-msgctxt "@text"
-msgid ""
-"Insert the USB stick into your printer and launch the procedure to load new "
-"material profiles."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:703
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:299
-msgctxt "@button"
-msgid "Back"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:712
-msgctxt "@button"
-msgid "Export material archive"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:747
-msgctxt "@title:window"
-msgid "Export All Materials"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
-msgctxt "@label (%1 is a number)"
-msgid ""
-"The new filament diameter is set to %1 mm, which is not compatible with the "
-"current extruder. Do you wish to continue?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
-msgctxt "@label"
-msgid "Display Name"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
-msgctxt "@label"
-msgid "Brand"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
-msgctxt "@label"
-msgid "Material Type"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Color"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:262
-msgctxt "@title"
-msgid "Material color picker"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:275
-msgctxt "@label"
-msgid "Properties"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:286
-msgctxt "@label"
-msgid "Density"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:319
-msgctxt "@label"
-msgid "Diameter"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:369
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:401
-msgctxt "@label"
-msgid "Filament weight"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:433
-msgctxt "@label"
-msgid "Filament length"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:451
-msgctxt "@label"
-msgid "Cost per Meter"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:465
-msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:472
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:485
-msgctxt "@label"
-msgid "Description"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:503
-msgctxt "@label"
-msgid "Adhesion Information"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
-msgctxt "@title"
-msgid "Information"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:647
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:82
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:18
-msgctxt "@label"
-msgid "Print settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
-msgctxt "@label"
-msgid "Materials compatible with active printer:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:94
-msgctxt "@action:button"
-msgid "Create new"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:88
-msgctxt "@action:button"
-msgid "Import"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
-msgctxt "@action:button"
-msgid "Sync with Printers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/MachinesPage.qml:142
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:294
-msgctxt "@action:button"
-msgid "Activate"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:311
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:342
-msgctxt "@action:button"
-msgid "Export"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:392
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:393
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid ""
-"Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:267
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:272
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid ""
-"Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:275
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
-msgctxt "@item:tooltip"
-msgid ""
-"This setting has been hidden by the active machine and will not be visible."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
-msgctxt "@item:tooltip %1 is list of setting names"
-msgid ""
-"This setting has been hidden by the value of %1. Change the value of that "
-"setting to make this setting visible."
-msgid_plural ""
-"This setting has been hidden by the values of %1. Change the values of those "
-"settings to make this setting visible."
-msgstr[0] ""
-msgstr[1] ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:14
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Cura.qml:461
-msgctxt "@title:tab"
-msgid "General"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:172
-msgctxt "@label"
-msgid "Interface"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:215
-msgctxt "@heading"
-msgid "-- incomplete --"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:261
-msgctxt "@label"
-msgid "Currency:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:277
-msgctxt ""
-"@label: Please keep the asterix, it's to indicate that a restart is needed."
-msgid "Theme*:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:323
-msgctxt "@info:tooltip"
-msgid "Slice automatically when changing settings."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:331
-msgctxt "@option:check"
-msgid "Slice automatically"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:340
-msgctxt "@info:tooltip"
-msgid "Show an icon and notifications in the system notification area."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:348
-msgctxt "@option:check"
-msgid "Add icon to system tray *"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:357
-msgctxt "@label"
-msgid ""
-"*You will need to restart the application for these changes to have effect."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:373
-msgctxt "@label"
-msgid "Viewport behavior"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:381
-msgctxt "@info:tooltip"
-msgid ""
-"Highlight unsupported areas of the model in red. Without support these areas "
-"will not print properly."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:390
-msgctxt "@option:check"
-msgid "Display overhang"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:400
-msgctxt "@info:tooltip"
-msgid ""
-"Highlight missing or extraneous surfaces of the model using warning signs. "
-"The toolpaths will often be missing parts of the intended geometry."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:409
-msgctxt "@option:check"
-msgid "Display model errors"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:417
-msgctxt "@info:tooltip"
-msgid ""
-"Moves the camera so the model is in the center of the view when a model is "
-"selected"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:422
-msgctxt "@action:button"
-msgid "Center camera when item is selected"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:432
-msgctxt "@info:tooltip"
-msgid "Should the default zoom behavior of cura be inverted?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:437
-msgctxt "@action:button"
-msgid "Invert the direction of camera zoom."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:453
-msgctxt "@info:tooltip"
-msgid "Should zooming move in the direction of the mouse?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:453
-msgctxt "@info:tooltip"
-msgid ""
-"Zooming towards the mouse is not supported in the orthographic perspective."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:458
-msgctxt "@action:button"
-msgid "Zoom toward mouse direction"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:484
-msgctxt "@info:tooltip"
-msgid ""
-"Should models on the platform be moved so that they no longer intersect?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:489
-msgctxt "@option:check"
-msgid "Ensure models are kept apart"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:498
-msgctxt "@info:tooltip"
-msgid "Should models on the platform be moved down to touch the build plate?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:503
-msgctxt "@option:check"
-msgid "Automatically drop models to the build plate"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:515
-msgctxt "@info:tooltip"
-msgid "Show caution message in g-code reader."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:524
-msgctxt "@option:check"
-msgid "Caution message in g-code reader"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:532
-msgctxt "@info:tooltip"
-msgid "Should layer be forced into compatibility mode?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:537
-msgctxt "@option:check"
-msgid "Force layer view compatibility mode (restart required)"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:547
-msgctxt "@info:tooltip"
-msgid "Should Cura open at the location it was closed?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:552
-msgctxt "@option:check"
-msgid "Restore window position on start"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:562
-msgctxt "@info:tooltip"
-msgid "What type of camera rendering should be used?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:569
-msgctxt "@window:text"
-msgid "Camera rendering:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:576
-msgid "Perspective"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:577
-msgid "Orthographic"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:617
-msgctxt "@label"
-msgid "Opening and saving files"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:624
-msgctxt "@info:tooltip"
-msgid ""
-"Should opening files from the desktop or external applications open in the "
-"same instance of Cura?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:629
-msgctxt "@option:check"
-msgid "Use a single instance of Cura"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:640
-msgctxt "@info:tooltip"
-msgid ""
-"Should the build plate be cleared before loading a new model in the single "
-"instance of Cura?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:646
-msgctxt "@option:check"
-msgid "Clear buildplate before loading model into the single instance"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:656
-msgctxt "@info:tooltip"
-msgid "Should models be scaled to the build volume if they are too large?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:661
-msgctxt "@option:check"
-msgid "Scale large models"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:671
-msgctxt "@info:tooltip"
-msgid ""
-"An model may appear extremely small if its unit is for example in meters "
-"rather than millimeters. Should these models be scaled up?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:676
-msgctxt "@option:check"
-msgid "Scale extremely small models"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:686
-msgctxt "@info:tooltip"
-msgid "Should models be selected after they are loaded?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:691
-msgctxt "@option:check"
-msgid "Select models when loaded"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:701
-msgctxt "@info:tooltip"
-msgid ""
-"Should a prefix based on the printer name be added to the print job name "
-"automatically?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:706
-msgctxt "@option:check"
-msgid "Add machine prefix to job name"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:716
-msgctxt "@info:tooltip"
-msgid "Should a summary be shown when saving a project file?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:720
-msgctxt "@option:check"
-msgid "Show summary dialog when saving project"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:730
-msgctxt "@info:tooltip"
-msgid "Default behavior when opening a project file"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:738
-msgctxt "@window:text"
-msgid "Default behavior when opening a project file: "
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:753
-msgctxt "@option:openProject"
-msgid "Always ask me this"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:754
-msgctxt "@option:openProject"
-msgid "Always open as a project"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:755
-msgctxt "@option:openProject"
-msgid "Always import models"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:792
-msgctxt "@info:tooltip"
-msgid ""
-"When you have made changes to a profile and switched to a different one, a "
-"dialog will be shown asking whether you want to keep your modifications or "
-"not, or you can choose a default behaviour and never show that dialog again."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:801
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:36
-msgctxt "@label"
-msgid "Profiles"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:806
-msgctxt "@window:text"
-msgid ""
-"Default behavior for changed setting values when switching to a different "
-"profile: "
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:820
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:115
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:821
-msgctxt "@option:discardOrKeep"
-msgid "Always discard changed settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:822
-msgctxt "@option:discardOrKeep"
-msgid "Always transfer changed settings to new profile"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:856
-msgctxt "@label"
-msgid "Privacy"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:862
-msgctxt "@info:tooltip"
-msgid ""
-"Should anonymous data about your print be sent to UltiMaker? Note, no "
-"models, IP addresses or other personally identifiable information is sent or "
-"stored."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:867
-msgctxt "@option:check"
-msgid "Send (anonymous) print information"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:897
-msgctxt "@label"
-msgid "Updates"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:904
-msgctxt "@info:tooltip"
-msgid "Should Cura check for updates when the program is started?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:909
-msgctxt "@option:check"
-msgid "Check for updates on start"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:925
-msgctxt "@info:tooltip"
-msgid "When checking for updates, only check for stable releases."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:931
-msgctxt "@option:radio"
-msgid "Stable releases only"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:941
-msgctxt "@info:tooltip"
-msgid "When checking for updates, check for both stable and for beta releases."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:947
-msgctxt "@option:radio"
-msgid "Stable and Beta releases"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:957
-msgctxt "@info:tooltip"
-msgid ""
-"Should an automatic check for new plugins be done every time Cura is "
-"started? It is highly recommended that you do not disable this!"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/GeneralPage.qml:962
-msgctxt "@option:check"
-msgid "Get notifications for plugin updates"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/RenameDialog.qml:22
-msgctxt "@title:window"
-msgid "Rename"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/RenameDialog.qml:23
-msgctxt "@info"
-msgid "Please provide a new name."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/MachinesPage.qml:17
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Cura.qml:466
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/MachinesPage.qml:50
-msgctxt "@action:button"
-msgid "Add New"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/MachinesPage.qml:154
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:331
-msgctxt "@action:button"
-msgid "Rename"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:57
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Cura.qml:470
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:59
-msgctxt "@label"
-msgid "Profiles compatible with active printer:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:98
-msgctxt "@action:tooltip"
-msgid "Create new profile from current settings/overrides"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:125
-msgctxt "@action:label"
-msgid "Some settings from current profile were overwritten."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:140
-msgctxt "@action:button"
-msgid "Update profile."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:143
-msgctxt "@action:tooltip"
-msgid "Update profile with current settings/overrides"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:148
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:158
-msgctxt "@action:label"
-msgid ""
-"This profile uses the defaults specified by the printer, so it has no "
-"settings/overrides in the list below."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:165
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:175
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:278
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:280
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:352
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:368
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:382
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:409
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:422
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Preferences/ProfilesPage.qml:429
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ViewOrientationControls.qml:25
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ViewOrientationControls.qml:38
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ViewOrientationControls.qml:51
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ViewOrientationControls.qml:64
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ViewOrientationControls.qml:77
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ObjectItemButton.qml:109
-msgctxt "@label"
-msgid "Is printed as support."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ObjectItemButton.qml:125
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] ""
-msgstr[1] ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Active print"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Job Name"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintMonitor.qml:172
-msgctxt "@label"
-msgid "Printing Time"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintMonitor.qml:180
-msgctxt "@label"
-msgid "Estimated time left"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:38
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:87
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
-msgctxt "@label"
-msgid "What's New"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214
-msgctxt "@label"
-msgid "Profile author"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226
-msgctxt "@label"
-msgid "Printer name"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
-msgctxt "@label"
-msgid "Release Notes"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
-msgctxt "@label"
-msgid "Refresh"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
-msgctxt "@label"
-msgid "Add printer by IP"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:220
-msgctxt "@label"
-msgid "Troubleshooting"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/CloudContent.qml:64
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Account/GeneralOperations.qml:19
-msgctxt "@label"
-msgid "Sign in to the UltiMaker platform"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/CloudContent.qml:123
-msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/CloudContent.qml:149
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/CloudContent.qml:175
-msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the UltiMaker Community"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/CloudContent.qml:189
-msgctxt "@button"
-msgid "Skip"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/CloudContent.qml:201
-msgctxt "@text"
-msgid "Create a free UltiMaker Account"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
-msgctxt "@label"
-msgid "Help us to improve UltiMaker Cura"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:56
-msgctxt "@text"
-msgid ""
-"UltiMaker Cura collects anonymous data to improve print quality and user "
-"experience, including:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:68
-msgctxt "@text"
-msgid "Machine types"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:74
-msgctxt "@text"
-msgid "Material usage"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:80
-msgctxt "@text"
-msgid "Number of slices"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:86
-msgctxt "@text"
-msgid "Print settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:99
-msgctxt "@text"
-msgid ""
-"Data collected by UltiMaker Cura will not contain any personal information."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:100
-msgctxt "@text"
-msgid "More information"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:73
-msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:83
-msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:117
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:186
-msgctxt "@button"
-msgid "Add printer manually"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
-msgctxt "@button"
-msgid "Decline and close"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:128
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:150
-msgctxt "@button"
-msgid "Add"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:195
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:196
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:201
-msgctxt "@label"
-msgid "Can't connect to your UltiMaker printer?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:200
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:231
-msgctxt "@label"
-msgid ""
-"This printer cannot be added because it's an unknown printer or it's not the "
-"host of a group."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:312
-msgctxt "@button"
-msgid "Connect"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to UltiMaker Cura"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/WelcomeContent.qml:67
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up UltiMaker Cura. This will only take a "
-"few moments."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/WelcomePages/WelcomeContent.qml:82
-msgctxt "@button"
-msgid "Get started"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:81
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:88
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:96
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:103
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:113
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:131
-msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:139
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:146
-msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:153
-msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:160
-msgctxt "@action:inmenu menubar:view"
-msgid "Bottom View"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:188
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:195
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:201
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:208
-msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:216
-msgctxt ""
-"@action:inmenu Marketplace is a brand name of UltiMaker's, so don't "
-"translate."
-msgid "Add more materials from Marketplace"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:223
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:231
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:243
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:249
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:257
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:273
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:287
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:294
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:304
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:313
-msgctxt "@action:inmenu menubar:edit"
-msgid "Multiply Selected"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:322
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:330
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:336
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:356
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:366
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:376
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:393
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:403
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:420
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:443
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:453
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Actions.qml:460
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/MonitorButton.qml:115
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/MonitorButton.qml:129
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/MonitorButton.qml:140
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/MonitorButton.qml:142
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/MonitorButton.qml:145
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/MonitorButton.qml:148
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/MonitorButton.qml:150
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/MonitorButton.qml:318
-msgctxt "@label"
-msgid "Abort Print"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/MonitorButton.qml:327
-msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ProfileOverview.qml:36
-msgctxt "@title:column"
-msgid "Setting"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ProfileOverview.qml:37
-msgctxt "@title:column"
-msgid "Profile"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ProfileOverview.qml:38
-msgctxt "@title:column"
-msgid "Current"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ProfileOverview.qml:39
-msgctxt "@title:column Unit of measurement"
-msgid "Unit"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/SettingsMenu.qml:34
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/SettingsMenu.qml:49
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/SettingsMenu.qml:55
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/SettingsMenu.qml:63
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/FileMenu.qml:45
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/FileMenu.qml:78
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/FileMenu.qml:89
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/MaterialMenu.qml:53
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/MaterialMenu.qml:78
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/PrinterMenu.qml:13
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/PrinterMenu.qml:17
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/PrinterMenu.qml:50
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ExtensionMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/PreferencesMenu.qml:21
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
-msgctxt "@header"
-msgid "Custom"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:173
-msgctxt "@label"
-msgid "Enabled"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:222
-msgctxt "@label"
-msgid "Material"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:348
-msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
-msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
-msgctxt "@label"
-msgid ""
-"The configurations are not available because the printer is disconnected."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
-msgctxt "@label"
-msgid ""
-"This configuration is not available because %1 is not recognized. Please "
-"visit %2 to download the correct material profile."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
-msgctxt "@label"
-msgid "Marketplace"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid ""
-"The configuration of this extruder is not allowed, and prohibits slicing."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:110
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:250
-msgctxt "@label"
-msgid "Select configuration"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:358
-msgctxt "@label"
-msgid "Configurations"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/HelpMenu.qml:14
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ViewMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ViewMenu.qml:17
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ViewMenu.qml:30
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ContextMenu.qml:29
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ContextMenu.qml:92
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/ContextMenu.qml:123
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/EditMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/ChoosePrinterDialog.qml:17
-msgctxt "@title:window"
-msgid "Select Printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/ChoosePrinterDialog.qml:54
-msgctxt "@title:label"
-msgid "Compatible Printers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/ChoosePrinterDialog.qml:94
-msgctxt "@description"
-msgid "No compatible printers, that are currently online, where found."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Cura.qml:635
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
-msgctxt "@text:window"
-msgid ""
-"We have found one or more project file(s) within the files you have "
-"selected. You can open only one project file at a time. We suggest to only "
-"import models from those files. Would you like to proceed?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:84
-msgctxt "@text:window"
-msgid ""
-"This is a Cura project file. Would you like to open it as a project or "
-"import the models from it?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
-msgctxt "@action:button"
-msgid "Import models"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:13
-msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:59
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings. Would you like to Keep these "
-"changed settings after switching profiles? Alternatively, you can discard "
-"the changes to load the defaults from '%1'."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:85
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:87
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:116
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:117
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:147
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:153
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:177
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:193
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:195
-msgctxt "@action:label"
-msgid "Material"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:298
-msgctxt "@action:button"
-msgid "Save"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:15
-msgctxt "@title:window The argument is the application name."
-msgid "About %1"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:59
-msgctxt "@label"
-msgid "version: %1"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:74
-msgctxt "@label"
-msgid "End-to-end solution for fused filament 3D printing."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:87
-msgctxt "@info:credit"
-msgid ""
-"Cura is developed by UltiMaker in cooperation with the community.\n"
-"Cura proudly uses the following open source projects:"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:138
-msgctxt "@label Description for application component"
-msgid "Graphical user interface"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:139
-msgctxt "@label Description for application component"
-msgid "Application framework"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:140
-msgctxt "@label Description for application component"
-msgid "G-code generator"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:141
-msgctxt "@label Description for application component"
-msgid "Interprocess communication library"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:142
-msgctxt "@label Description for application component"
-msgid "Python bindings for libnest2d"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:143
-msgctxt "@label Description for application component"
-msgid "Polygon packing library, developed by Prusa Research"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:144
-msgctxt "@label Description for application component"
-msgid "Support library for handling 3MF files"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:145
-msgctxt "@label Description for application component"
-msgid "Support library for file metadata and streaming"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:148
-msgctxt "@label Description for application dependency"
-msgid "Programming language"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:149
-msgctxt "@label Description for application dependency"
-msgid "GUI framework"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:150
-msgctxt "@label Description for application dependency"
-msgid "GUI framework bindings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:151
-msgctxt "@label Description for application dependency"
-msgid "C/C++ Binding library"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:152
-msgctxt "@label Description for application dependency"
-msgid "Data interchange format"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:153
-msgctxt "@label"
-msgid "Font"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-msgctxt "@label Description for application dependency"
-msgid "Polygon clipping library"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:157
-msgctxt "@label Description for application dependency"
-msgid "JSON parser"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:158
-msgctxt "@label Description for application dependency"
-msgid "Utility functions, including an image loader"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:159
-msgctxt "@label Description for application dependency"
-msgid "Utility library, including Voronoi generation"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:162
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:163
-msgctxt "@label Description for application dependency"
-msgid "Root Certificates for validating SSL trustworthiness"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:164
-msgctxt "@label Description for application dependency"
-msgid "Compatibility between Python 2 and 3"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:165
-msgctxt "@label Description for application dependency"
-msgid "Support library for system keyring access"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:166
-msgctxt "@label Description for application dependency"
-msgid "Support library for faster math"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:167
-msgctxt "@label Description for application dependency"
-msgid "Support library for handling STL files"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:168
-msgctxt "@label Description for application dependency"
-msgid "Python bindings for Clipper"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:169
-msgctxt "@label Description for application dependency"
-msgid "Serial communication library"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:170
-msgctxt "@label Description for application dependency"
-msgid "Support library for scientific computing"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:171
-msgctxt "@Label Description for application dependency"
-msgid "Python Error tracking library"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:172
-msgctxt "@label Description for application dependency"
-msgid "Support library for handling triangular meshes"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:173
-msgctxt "@label Description for application dependency"
-msgid "ZeroConf discovery library"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:176
-msgctxt "@label Description for development tool"
-msgid "Universal build system configuration"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:177
-msgctxt "@label Description for development tool"
-msgid "Dependency and package manager"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:178
-msgctxt "@label Description for development tool"
-msgid "Packaging Python-applications"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:179
-msgctxt "@label Description for development tool"
-msgid "Linux cross-distribution application deployment"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Dialogs/AboutDialog.qml:180
-msgctxt "@label Description for development tool"
-msgid "Generating Windows installers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ColorDialog.qml:107
-msgctxt "@label"
-msgid "Hex"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend UltiMaker Cura with plugins and material profiles."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with UltiMaker e-learning."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "UltiMaker support"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with UltiMaker Cura."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the UltiMaker Community."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the UltiMaker website."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:40
-msgctxt "@label"
-msgid "Support"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:44
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:78
-msgctxt "@label"
-msgid ""
-"Generate structures to support parts of the model which have overhangs. "
-"Without these structures, such parts would collapse during printing."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:54
-msgctxt "@info, %1 is the name of the custom profile"
-msgid "<b>%1</b> custom profile is active and you overwrote some settings."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:68
-msgctxt "@info, %1 is the name of the custom profile"
-msgid "<b>%1</b> custom profile is overriding some settings."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:79
-msgctxt "@info"
-msgid "Some settings were changed."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:78
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:254
-msgctxt "@label"
-msgid ""
-"Gradual infill will gradually increase the amount of infill towards the top."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:216
-msgctxt "@label"
-msgid "Gradual infill"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:31
-msgctxt "@error"
-msgid "Configuration not supported"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:39
-msgctxt "@message:text %1 is the name the printer uses for 'nozzle'."
-msgid ""
-"No profiles are available for the selected material/%1 configuration. Please "
-"change your configuration."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:47
-msgctxt "@button:label"
-msgid "Learn more"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
-msgctxt "@label"
-msgid "Adhesion"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:76
-msgctxt "@label"
-msgid ""
-"Enable printing a brim or raft. This will add a flat area around or under "
-"your object which is easy to cut off afterwards."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedResolutionSelector.qml:27
-msgctxt "@label"
-msgid "Resolution"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:20
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
-msgctxt "@label"
-msgid "Experimental"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:142
-msgctxt "@button"
-msgid "Recommended"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:156
-msgctxt "@button"
-msgid "Custom"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
-msgctxt "@label"
-msgid "Profile"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:145
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the "
-"profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
-msgctxt "@label"
-msgid "Build plate"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
-msgctxt "@tooltip"
-msgid ""
-"The target temperature of the heated bed. The bed will heat up or cool down "
-"towards this temperature. If this is 0, the bed heating is turned off."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
-msgctxt "@tooltip of pre-heat"
-msgid ""
-"Heat the bed in advance before printing. You can continue adjusting your "
-"print while it is heating, and you won't have to wait for the bed to heat up "
-"when you're ready to print."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
-msgctxt "@label"
-msgid "Extruder"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
-msgctxt "@tooltip"
-msgid ""
-"The target temperature of the hotend. The hotend will heat up or cool down "
-"towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
-msgctxt "@tooltip of pre-heat"
-msgid ""
-"Heat the hotend in advance before printing. You can continue adjusting your "
-"print while it is heating, and you won't have to wait for the hotend to heat "
-"up when you're ready to print."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
-msgctxt "@label"
-msgid "Printer control"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
-msgctxt "@label"
-msgid "Jog Position"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
-msgctxt "@label"
-msgid "X/Y"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
-msgctxt "@label"
-msgid "Z"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
-msgctxt "@label"
-msgid "Jog Distance"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
-msgctxt "@label"
-msgid "Send G-code"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
-msgctxt "@tooltip of G-code command input"
-msgid ""
-"Send a custom G-code command to the connected printer. Press 'enter' to send "
-"the command."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Cura.qml:250
-msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Cura.qml:464
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Cura.qml:588
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Cura.qml:597
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Cura.qml:740
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Cura.qml:747
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Cura.qml:749
-msgctxt "@text:window"
-msgid ""
-"We have found one or more G-Code files within the files you have selected. "
-"You can only open one G-Code file at a time. If you want to open a G-Code "
-"file, please just select only one."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Cura.qml:829
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Cura.qml:837
-msgctxt "@title:window"
-msgid "What's New"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Account/GeneralOperations.qml:39
-msgctxt "@text"
-msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the UltiMaker community"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Account/GeneralOperations.qml:58
-msgctxt "@button"
-msgid "Create a free UltiMaker account"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Account/UserOperations.qml:78
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Account/UserOperations.qml:107
-msgctxt "@button"
-msgid "UltiMaker Account"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Account/SyncState.qml:35
-msgctxt "@label"
-msgid "Checking..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Account/SyncState.qml:42
-msgctxt "@label"
-msgid "Account synced"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Account/SyncState.qml:49
-msgctxt "@label"
-msgid "Something went wrong..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Account/SyncState.qml:102
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Account/SyncState.qml:123
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid ""
-"The cloud printer is offline. Please check if the printer is turned on and "
-"connected to the internet."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid ""
-"This printer is not linked to your account. Please visit the UltiMaker "
-"Digital Factory to establish a connection."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid ""
-"The cloud connection is currently unavailable. Please sign in to connect to "
-"the cloud printer."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid ""
-"The cloud connection is currently unavailable. Please check your internet "
-"connection."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterSelector/MachineSelector.qml:237
-msgctxt "@button"
-msgid "Add printer"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterSelector/MachineSelector.qml:254
-msgctxt "@button"
-msgid "Manage printers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterSelector/MachineListButton.qml:34
-msgctxt "@label"
-msgid "Hide all connected printers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterSelector/MachineListButton.qml:47
-msgctxt "@label"
-msgid "Show all connected printers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
-msgctxt "@label"
-msgid "Other printers"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:78
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:114
-msgctxt "@button"
-msgid "Processing"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:114
-msgctxt "@button"
-msgid "Slice"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:115
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:132
-msgctxt "@button"
-msgid "Cancel"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:107
-msgctxt "@label"
-msgid "Material estimation"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:156
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:157
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/JobSpecs.qml:93
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr ""
-
-#: /Users/c.lamboo/ultimaker/Cura/resources/qml/Widgets/ComboBox.qml:18
-msgctxt "@label"
-msgid "No items to select from"
-msgstr ""
-
-#: /MachineSettingsAction/plugin.json
-msgctxt "description"
-msgid ""
-"Provides a way to change machine settings (such as build volume, nozzle "
-"size, etc.)."
-msgstr ""
-
-#: /MachineSettingsAction/plugin.json
-msgctxt "name"
-msgid "Machine Settings Action"
-msgstr ""
-
-#: /ImageReader/plugin.json
-msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr ""
-
-#: /ImageReader/plugin.json
-msgctxt "name"
-msgid "Image Reader"
-msgstr ""
-
-#: /XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr ""
-
-#: /XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr ""
-
-#: /X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr ""
-
-#: /X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr ""
-
-#: /CuraProfileReader/plugin.json
-msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr ""
-
-#: /CuraProfileReader/plugin.json
-msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr ""
-
-#: /PostProcessingPlugin/plugin.json
-msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr ""
-
-#: /PostProcessingPlugin/plugin.json
-msgctxt "name"
-msgid "Post Processing"
-msgstr ""
-
-#: /UM3NetworkPrinting/plugin.json
-msgctxt "description"
-msgid "Manages network connections to UltiMaker networked printers."
-msgstr ""
-
-#: /UM3NetworkPrinting/plugin.json
-msgctxt "name"
-msgid "UltiMaker Network Connection"
-msgstr ""
-
-#: /3MFWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr ""
-
-#: /3MFWriter/plugin.json
-msgctxt "name"
-msgid "3MF Writer"
-msgstr ""
-
-#: /CuraDrive/plugin.json
-msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr ""
-
-#: /CuraDrive/plugin.json
-msgctxt "name"
-msgid "Cura Backups"
-msgstr ""
-
-#: /SliceInfoPlugin/plugin.json
-msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr ""
-
-#: /SliceInfoPlugin/plugin.json
-msgctxt "name"
-msgid "Slice info"
-msgstr ""
-
-#: /UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing UltiMaker Format Packages."
-msgstr ""
-
-#: /UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr ""
-
-#: /DigitalLibrary/plugin.json
-msgctxt "description"
-msgid ""
-"Connects to the Digital Library, allowing Cura to open files from and save "
-"files to the Digital Library."
-msgstr ""
-
-#: /DigitalLibrary/plugin.json
-msgctxt "name"
-msgid "Ultimaker Digital Library"
-msgstr ""
-
-#: /GCodeProfileReader/plugin.json
-msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr ""
-
-#: /GCodeProfileReader/plugin.json
-msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr ""
-
-#: /GCodeReader/plugin.json
-msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr ""
-
-#: /GCodeReader/plugin.json
-msgctxt "name"
-msgid "G-code Reader"
-msgstr ""
-
-#: /TrimeshReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr ""
-
-#: /TrimeshReader/plugin.json
-msgctxt "name"
-msgid "Trimesh Reader"
-msgstr ""
-
-#: /UltimakerMachineActions/plugin.json
-msgctxt "description"
-msgid ""
-"Provides machine actions for UltiMaker machines (such as bed leveling "
-"wizard, selecting upgrades, etc.)."
-msgstr ""
-
-#: /UltimakerMachineActions/plugin.json
-msgctxt "name"
-msgid "UltiMaker machine actions"
-msgstr ""
-
-#: /GCodeGzReader/plugin.json
-msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr ""
-
-#: /GCodeGzReader/plugin.json
-msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr ""
-
-#: /Marketplace/plugin.json
-msgctxt "description"
-msgid ""
-"Manages extensions to the application and allows browsing extensions from "
-"the UltiMaker website."
-msgstr ""
-
-#: /Marketplace/plugin.json
-msgctxt "name"
-msgid "Marketplace"
-msgstr ""
-
-#: /RemovableDriveOutputDevice/plugin.json
-msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr ""
-
-#: /RemovableDriveOutputDevice/plugin.json
-msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr ""
-
-#: /MonitorStage/plugin.json
-msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr ""
-
-#: /MonitorStage/plugin.json
-msgctxt "name"
-msgid "Monitor Stage"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade25to26/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade25to26/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade26to27/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade26to27/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade413to50/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade413to50/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.13 to 5.0"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade48to49/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade48to49/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade34to35/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade34to35/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade32to33/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade32to33/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade33to34/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade33to34/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade41to42/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade41to42/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade42to43/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade42to43/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade35to40/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade35to40/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade22to24/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade22to24/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade21to22/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade21to22/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade49to410/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade49to410/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade27to30/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade27to30/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade30to31/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade30to31/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade411to412/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.11 to Cura 4.12."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade411to412/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.11 to 4.12"
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade40to41/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr ""
-
-#: /VersionUpgrade/VersionUpgrade40to41/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr ""
-
-#: /CuraEngineBackend/plugin.json
-msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr ""
-
-#: /CuraEngineBackend/plugin.json
-msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr ""
-
-#: /3MFReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr ""
-
-#: /3MFReader/plugin.json
-msgctxt "name"
-msgid "3MF Reader"
-msgstr ""
-
-#: /PerObjectSettingsTool/plugin.json
-msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr ""
-
-#: /PerObjectSettingsTool/plugin.json
-msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr ""
-
-#: /XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr ""
-
-#: /XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr ""
-
-#: /CuraProfileWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr ""
-
-#: /CuraProfileWriter/plugin.json
-msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr ""
-
-#: /ModelChecker/plugin.json
-msgctxt "description"
-msgid ""
-"Checks models and print configuration for possible printing issues and give "
-"suggestions."
-msgstr ""
-
-#: /ModelChecker/plugin.json
-msgctxt "name"
-msgid "Model Checker"
-msgstr ""
-
-#: /USBPrinting/plugin.json
-msgctxt "description"
-msgid ""
-"Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr ""
-
-#: /USBPrinting/plugin.json
-msgctxt "name"
-msgid "USB printing"
-msgstr ""
-
-#: /PreviewStage/plugin.json
-msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr ""
-
-#: /PreviewStage/plugin.json
-msgctxt "name"
-msgid "Preview Stage"
-msgstr ""
-
-#: /GCodeWriter/plugin.json
-msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr ""
-
-#: /GCodeWriter/plugin.json
-msgctxt "name"
-msgid "G-code Writer"
-msgstr ""
-
-#: /UFPReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading UltiMaker Format Packages."
-msgstr ""
-
-#: /UFPReader/plugin.json
-msgctxt "name"
-msgid "UFP Reader"
-msgstr ""
-
-#: /FirmwareUpdater/plugin.json
-msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr ""
-
-#: /FirmwareUpdater/plugin.json
-msgctxt "name"
-msgid "Firmware Updater"
-msgstr ""
-
-#: /GCodeGzWriter/plugin.json
-msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr ""
-
-#: /GCodeGzWriter/plugin.json
-msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr ""
-
-#: /SimulationView/plugin.json
-msgctxt "description"
-msgid "Provides the preview of sliced layerdata."
-msgstr ""
-
-#: /SimulationView/plugin.json
-msgctxt "name"
-msgid "Simulation View"
-msgstr ""
-
-#: /LegacyProfileReader/plugin.json
-msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr ""
-
-#: /LegacyProfileReader/plugin.json
-msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr ""
-
-#: /AMFReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr ""
-
-#: /AMFReader/plugin.json
-msgctxt "name"
-msgid "AMF Reader"
-msgstr ""
-
-#: /SolidView/plugin.json
-msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr ""
-
-#: /SolidView/plugin.json
-msgctxt "name"
-msgid "Solid View"
-msgstr ""
-
-#: /FirmwareUpdateChecker/plugin.json
-msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr ""
-
-#: /FirmwareUpdateChecker/plugin.json
-msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr ""
-
-#: /SentryLogger/plugin.json
-msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr ""
-
-#: /SentryLogger/plugin.json
-msgctxt "name"
-msgid "Sentry Logger"
-msgstr ""
-
-#: /SupportEraser/plugin.json
-msgctxt "description"
-msgid ""
-"Creates an eraser mesh to block the printing of support in certain places"
-msgstr ""
-
-#: /SupportEraser/plugin.json
-msgctxt "name"
-msgid "Support Eraser"
-msgstr ""
-
-#: /PrepareStage/plugin.json
-msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr ""
-
-#: /PrepareStage/plugin.json
-msgctxt "name"
-msgid "Prepare Stage"
-msgstr ""

resources/i18n/de_DE/fdmextruder.def.json.po

@@ -7,19 +7,35 @@ msgstr ""
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
+"Language: \n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 
 #: /fdmextruder.def.json
-msgctxt "machine_settings label"
-msgid "Machine"
-msgstr "Gerät"
+msgctxt "platform_adhesion description"
+msgid "Adhesion"
+msgstr "Haftung"
 
 #: /fdmextruder.def.json
-msgctxt "machine_settings description"
-msgid "Machine specific settings"
-msgstr "Gerätespezifische Einstellungen"
+msgctxt "material_diameter description"
+msgid "Adjusts the diameter of the filament used. Match this value with the diameter of the used filament."
+msgstr "Der Durchmesser des verwendeten Filaments wird angepasst. Stellen Sie hier den Durchmesser des verwendeten Filaments ein."
+
+#: /fdmextruder.def.json
+msgctxt "platform_adhesion label"
+msgid "Build Plate Adhesion"
+msgstr "Druckplattenhaftung"
+
+#: /fdmextruder.def.json
+msgctxt "material_diameter label"
+msgid "Diameter"
+msgstr "Durchmesser"
+
+#: /fdmextruder.def.json
+msgctxt "machine_extruder_end_code description"
+msgid "End g-code to execute when switching away from this extruder."
+msgstr "Auszuführenden G-Code beim Umschalten von diesem Extruder beenden."
 
 #: /fdmextruder.def.json
 msgctxt "extruder_nr label"
@@ -27,213 +43,181 @@ msgid "Extruder"
 msgstr "Extruder"
 
 #: /fdmextruder.def.json
-msgctxt "extruder_nr description"
-msgid "The extruder train used for printing. This is used in multi-extrusion."
-msgstr "Die für das Drucken verwendete Extruder-Einheit. Diese wird für die Mehrfach-Extrusion benutzt."
-
-#: /fdmextruder.def.json
-msgctxt "machine_nozzle_id label"
-msgid "Nozzle ID"
-msgstr "Düsen-ID"
+msgctxt "machine_extruder_end_code label"
+msgid "Extruder End G-Code"
+msgstr "G-Code Extruder-Ende"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_id description"
-msgid "The nozzle ID for an extruder train, such as \"AA 0.4\" and \"BB 0.8\"."
-msgstr "Der Düsen-ID für eine Extruder-Einheit, z. B. „AA 0,4“ und „BB 0,8“."
+msgctxt "machine_extruder_end_pos_abs label"
+msgid "Extruder End Position Absolute"
+msgstr "Absolute Extruder-Endposition"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_size label"
-msgid "Nozzle Diameter"
-msgstr "Düsendurchmesser"
+msgctxt "machine_extruder_end_pos_x label"
+msgid "Extruder End Position X"
+msgstr "Extruder-Endposition X"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_size description"
-msgid ""
-"The inner diameter of the nozzle. Change this setting when using a non-"
-"standard nozzle size."
-msgstr "Der Innendurchmesser der Düse. Verwenden Sie diese Einstellung, wenn Sie eine Düse einer Nicht-Standardgröße verwenden."
+msgctxt "machine_extruder_end_pos_y label"
+msgid "Extruder End Position Y"
+msgstr "Extruder-Endposition Y"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_offset_x label"
-msgid "Nozzle X Offset"
-msgstr "X-Versatz Düse"
+msgctxt "extruder_prime_pos_x label"
+msgid "Extruder Prime X Position"
+msgstr "X-Position Extruder-Einzug"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_offset_x description"
-msgid "The x-coordinate of the offset of the nozzle."
-msgstr "Die X-Koordinate des Düsenversatzes."
+msgctxt "extruder_prime_pos_y label"
+msgid "Extruder Prime Y Position"
+msgstr "Y-Position Extruder-Einzug"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_offset_y label"
-msgid "Nozzle Y Offset"
-msgstr "Y-Versatz Düse"
+msgctxt "extruder_prime_pos_z label"
+msgid "Extruder Prime Z Position"
+msgstr "Z-Position Extruder-Einzug"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_offset_y description"
-msgid "The y-coordinate of the offset of the nozzle."
-msgstr "Die Y-Koordinate des Düsenversatzes."
+msgctxt "machine_extruder_cooling_fan_number label"
+msgid "Extruder Print Cooling Fan"
+msgstr "Drucklüfter Extruder"
 
 #: /fdmextruder.def.json
 msgctxt "machine_extruder_start_code label"
 msgid "Extruder Start G-Code"
 msgstr "G-Code Extruder-Start"
 
-#: /fdmextruder.def.json
-msgctxt "machine_extruder_start_code description"
-msgid "Start g-code to execute when switching to this extruder."
-msgstr "Auszuführenden G-Code beim Umschalten auf diesen Extruder starten."
-
 #: /fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_abs label"
 msgid "Extruder Start Position Absolute"
 msgstr "Absolute Startposition des Extruders"
 
-#: /fdmextruder.def.json
-msgctxt "machine_extruder_start_pos_abs description"
-msgid ""
-"Make the extruder starting position absolute rather than relative to the "
-"last-known location of the head."
-msgstr "Bevorzugen Sie eine absolute Startposition des Extruders anstelle einer relativen Position zur zuletzt bekannten Kopfposition."
-
 #: /fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_x label"
 msgid "Extruder Start Position X"
 msgstr "X-Position Extruder-Start"
 
-#: /fdmextruder.def.json
-msgctxt "machine_extruder_start_pos_x description"
-msgid "The x-coordinate of the starting position when turning the extruder on."
-msgstr "Die X-Koordinate der Startposition beim Einschalten des Extruders."
-
 #: /fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_y label"
 msgid "Extruder Start Position Y"
 msgstr "Y-Position Extruder-Start"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_start_pos_y description"
-msgid "The y-coordinate of the starting position when turning the extruder on."
-msgstr "Die Y-Koordinate der Startposition beim Einschalten des Extruders."
+msgctxt "machine_settings label"
+msgid "Machine"
+msgstr "Gerät"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_code label"
-msgid "Extruder End G-Code"
-msgstr "G-Code Extruder-Ende"
+msgctxt "machine_settings description"
+msgid "Machine specific settings"
+msgstr "Gerätespezifische Einstellungen"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_code description"
-msgid "End g-code to execute when switching away from this extruder."
-msgstr "Auszuführenden G-Code beim Umschalten von diesem Extruder beenden."
+msgctxt "machine_extruder_end_pos_abs description"
+msgid "Make the extruder ending position absolute rather than relative to the last-known location of the head."
+msgstr "Bevorzugen Sie eine absolute Endposition des Extruders anstelle einer relativen Position zur zuletzt bekannten Kopfposition."
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_pos_abs label"
-msgid "Extruder End Position Absolute"
-msgstr "Absolute Extruder-Endposition"
+msgctxt "machine_extruder_start_pos_abs description"
+msgid "Make the extruder starting position absolute rather than relative to the last-known location of the head."
+msgstr "Bevorzugen Sie eine absolute Startposition des Extruders anstelle einer relativen Position zur zuletzt bekannten Kopfposition."
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_pos_abs description"
-msgid ""
-"Make the extruder ending position absolute rather than relative to the last-"
-"known location of the head."
-msgstr "Bevorzugen Sie eine absolute Endposition des Extruders anstelle einer relativen Position zur zuletzt bekannten Kopfposition."
+msgctxt "material description"
+msgid "Material"
+msgstr "Material"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_pos_x label"
-msgid "Extruder End Position X"
-msgstr "Extruder-Endposition X"
+msgctxt "material label"
+msgid "Material"
+msgstr "Material"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_pos_x description"
-msgid "The x-coordinate of the ending position when turning the extruder off."
-msgstr "Die X-Koordinate der Endposition beim Ausschalten des Extruders."
+msgctxt "machine_nozzle_size label"
+msgid "Nozzle Diameter"
+msgstr "Düsendurchmesser"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_pos_y label"
-msgid "Extruder End Position Y"
-msgstr "Extruder-Endposition Y"
+msgctxt "machine_nozzle_id label"
+msgid "Nozzle ID"
+msgstr "Düsen-ID"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_pos_y description"
-msgid "The y-coordinate of the ending position when turning the extruder off."
-msgstr "Die Y-Koordinate der Endposition beim Ausschalten des Extruders."
+msgctxt "machine_nozzle_offset_x label"
+msgid "Nozzle X Offset"
+msgstr "X-Versatz Düse"
 
 #: /fdmextruder.def.json
-msgctxt "extruder_prime_pos_z label"
-msgid "Extruder Prime Z Position"
-msgstr "Z-Position Extruder-Einzug"
+msgctxt "machine_nozzle_offset_y label"
+msgid "Nozzle Y Offset"
+msgstr "Y-Versatz Düse"
 
 #: /fdmextruder.def.json
-msgctxt "extruder_prime_pos_z description"
-msgid ""
-"The Z coordinate of the position where the nozzle primes at the start of "
-"printing."
-msgstr "Die Z-Koordinate der Position, an der die Düse am Druckbeginn einzieht."
+msgctxt "machine_extruder_start_code description"
+msgid "Start g-code to execute when switching to this extruder."
+msgstr "Auszuführenden G-Code beim Umschalten auf diesen Extruder starten."
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_cooling_fan_number label"
-msgid "Extruder Print Cooling Fan"
-msgstr "Drucklüfter Extruder"
+msgctxt "extruder_prime_pos_x description"
+msgid "The X coordinate of the position where the nozzle primes at the start of printing."
+msgstr "Die X-Koordinate der Position, an der die Düse am Druckbeginn einzieht."
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_cooling_fan_number description"
-msgid ""
-"The number of the print cooling fan associated with this extruder. Only "
-"change this from the default value of 0 when you have a different print "
-"cooling fan for each extruder."
-msgstr "Die Anzahl der Drucklüfter für diesen Extruder. Nur vom Standardwert 0 ändern, wenn Sie für jeden Extruder einen anderen Drucklüfter verwenden."
+msgctxt "extruder_prime_pos_y description"
+msgid "The Y coordinate of the position where the nozzle primes at the start of printing."
+msgstr "Die Y-Koordinate der Position, an der die Düse am Druckbeginn einzieht."
 
 #: /fdmextruder.def.json
-msgctxt "platform_adhesion label"
-msgid "Build Plate Adhesion"
-msgstr "Druckplattenhaftung"
+msgctxt "extruder_prime_pos_z description"
+msgid "The Z coordinate of the position where the nozzle primes at the start of printing."
+msgstr "Die Z-Koordinate der Position, an der die Düse am Druckbeginn einzieht."
 
 #: /fdmextruder.def.json
-msgctxt "platform_adhesion description"
-msgid "Adhesion"
-msgstr "Haftung"
+msgctxt "extruder_nr description"
+msgid "The extruder train used for printing. This is used in multi-extrusion."
+msgstr "Die für das Drucken verwendete Extruder-Einheit. Diese wird für die Mehrfach-Extrusion benutzt."
 
 #: /fdmextruder.def.json
-msgctxt "extruder_prime_pos_x label"
-msgid "Extruder Prime X Position"
-msgstr "X-Position Extruder-Einzug"
+msgctxt "machine_nozzle_size description"
+msgid "The inner diameter of the nozzle. Change this setting when using a non-standard nozzle size."
+msgstr "Der Innendurchmesser der Düse. Verwenden Sie diese Einstellung, wenn Sie eine Düse einer Nicht-Standardgröße verwenden."
 
 #: /fdmextruder.def.json
-msgctxt "extruder_prime_pos_x description"
-msgid ""
-"The X coordinate of the position where the nozzle primes at the start of "
-"printing."
-msgstr "Die X-Koordinate der Position, an der die Düse am Druckbeginn einzieht."
+msgctxt "machine_nozzle_id description"
+msgid "The nozzle ID for an extruder train, such as \"AA 0.4\" and \"BB 0.8\"."
+msgstr "Der Düsen-ID für eine Extruder-Einheit, z. B. „AA 0,4“ und „BB 0,8“."
 
 #: /fdmextruder.def.json
-msgctxt "extruder_prime_pos_y label"
-msgid "Extruder Prime Y Position"
-msgstr "Y-Position Extruder-Einzug"
+msgctxt "machine_extruder_cooling_fan_number description"
+msgid "The number of the print cooling fan associated with this extruder. Only change this from the default value of 0 when you have a different print cooling fan for each extruder."
+msgstr "Die Anzahl der Drucklüfter für diesen Extruder. Nur vom Standardwert 0 ändern, wenn Sie für jeden Extruder einen anderen Drucklüfter verwenden."
 
 #: /fdmextruder.def.json
-msgctxt "extruder_prime_pos_y description"
-msgid ""
-"The Y coordinate of the position where the nozzle primes at the start of "
-"printing."
-msgstr "Die Y-Koordinate der Position, an der die Düse am Druckbeginn einzieht."
+msgctxt "machine_extruder_end_pos_x description"
+msgid "The x-coordinate of the ending position when turning the extruder off."
+msgstr "Die X-Koordinate der Endposition beim Ausschalten des Extruders."
 
 #: /fdmextruder.def.json
-msgctxt "material label"
-msgid "Material"
-msgstr "Material"
+msgctxt "machine_nozzle_offset_x description"
+msgid "The x-coordinate of the offset of the nozzle."
+msgstr "Die X-Koordinate des Düsenversatzes."
 
 #: /fdmextruder.def.json
-msgctxt "material description"
-msgid "Material"
-msgstr "Material"
+msgctxt "machine_extruder_start_pos_x description"
+msgid "The x-coordinate of the starting position when turning the extruder on."
+msgstr "Die X-Koordinate der Startposition beim Einschalten des Extruders."
 
 #: /fdmextruder.def.json
-msgctxt "material_diameter label"
-msgid "Diameter"
-msgstr "Durchmesser"
+msgctxt "machine_extruder_end_pos_y description"
+msgid "The y-coordinate of the ending position when turning the extruder off."
+msgstr "Die Y-Koordinate der Endposition beim Ausschalten des Extruders."
 
 #: /fdmextruder.def.json
-msgctxt "material_diameter description"
-msgid ""
-"Adjusts the diameter of the filament used. Match this value with the "
-"diameter of the used filament."
-msgstr "Der Durchmesser des verwendeten Filaments wird angepasst. Stellen Sie hier den Durchmesser des verwendeten Filaments ein."
+msgctxt "machine_nozzle_offset_y description"
+msgid "The y-coordinate of the offset of the nozzle."
+msgstr "Die Y-Koordinate des Düsenversatzes."
+
+#: /fdmextruder.def.json
+msgctxt "machine_extruder_start_pos_y description"
+msgid "The y-coordinate of the starting position when turning the extruder on."
+msgstr "Die Y-Koordinate der Startposition beim Einschalten des Extruders."

resources/i18n/es_ES/fdmextruder.def.json.po

@@ -7,19 +7,35 @@ msgstr ""
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
+"Language: \n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 
 #: /fdmextruder.def.json
-msgctxt "machine_settings label"
-msgid "Machine"
-msgstr "Máquina"
+msgctxt "platform_adhesion description"
+msgid "Adhesion"
+msgstr "Adherencia"
 
 #: /fdmextruder.def.json
-msgctxt "machine_settings description"
-msgid "Machine specific settings"
-msgstr "Ajustes específicos de la máquina"
+msgctxt "material_diameter description"
+msgid "Adjusts the diameter of the filament used. Match this value with the diameter of the used filament."
+msgstr "Ajusta el diámetro del filamento utilizado. Este valor debe coincidir con el diámetro del filamento utilizado."
+
+#: /fdmextruder.def.json
+msgctxt "platform_adhesion label"
+msgid "Build Plate Adhesion"
+msgstr "Adherencia de la placa de impresión"
+
+#: /fdmextruder.def.json
+msgctxt "material_diameter label"
+msgid "Diameter"
+msgstr "Diámetro"
+
+#: /fdmextruder.def.json
+msgctxt "machine_extruder_end_code description"
+msgid "End g-code to execute when switching away from this extruder."
+msgstr "Finalizar GCode para ejecutarlo al cambiar desde este extrusor."
 
 #: /fdmextruder.def.json
 msgctxt "extruder_nr label"
@@ -27,214 +43,181 @@ msgid "Extruder"
 msgstr "Extrusor"
 
 #: /fdmextruder.def.json
-msgctxt "extruder_nr description"
-msgid "The extruder train used for printing. This is used in multi-extrusion."
-msgstr "El tren extrusor que se utiliza para imprimir. Se emplea en la extrusión múltiple."
-
-#: /fdmextruder.def.json
-msgctxt "machine_nozzle_id label"
-msgid "Nozzle ID"
-msgstr "Id. de la tobera"
+msgctxt "machine_extruder_end_code label"
+msgid "Extruder End G-Code"
+msgstr "GCode final del extrusor"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_id description"
-msgid "The nozzle ID for an extruder train, such as \"AA 0.4\" and \"BB 0.8\"."
-msgstr "Id. de la tobera de un tren extrusor, como \"AA 0.4\" y \"BB 0.8\"."
+msgctxt "machine_extruder_end_pos_abs label"
+msgid "Extruder End Position Absolute"
+msgstr "Posición final absoluta del extrusor"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_size label"
-msgid "Nozzle Diameter"
-msgstr "Diámetro de la tobera"
+msgctxt "machine_extruder_end_pos_x label"
+msgid "Extruder End Position X"
+msgstr "Posición de fin del extrusor sobre el eje X"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_size description"
-msgid ""
-"The inner diameter of the nozzle. Change this setting when using a non-"
-"standard nozzle size."
-msgstr "Diámetro interior de la tobera. Cambie este ajuste cuando utilice un tamaño de tobera no estándar."
+msgctxt "machine_extruder_end_pos_y label"
+msgid "Extruder End Position Y"
+msgstr "Posición de fin del extrusor sobre el eje Y"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_offset_x label"
-msgid "Nozzle X Offset"
-msgstr "Desplazamiento de la tobera sobre el eje X"
+msgctxt "extruder_prime_pos_x label"
+msgid "Extruder Prime X Position"
+msgstr "Posición de preparación del extrusor sobre el eje X"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_offset_x description"
-msgid "The x-coordinate of the offset of the nozzle."
-msgstr "Coordenada X del desplazamiento de la tobera."
+msgctxt "extruder_prime_pos_y label"
+msgid "Extruder Prime Y Position"
+msgstr "Posición de preparación del extrusor sobre el eje Y"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_offset_y label"
-msgid "Nozzle Y Offset"
-msgstr "Desplazamiento de la tobera sobre el eje Y"
+msgctxt "extruder_prime_pos_z label"
+msgid "Extruder Prime Z Position"
+msgstr "Posición de preparación del extrusor sobre el eje Z"
 
 #: /fdmextruder.def.json
-msgctxt "machine_nozzle_offset_y description"
-msgid "The y-coordinate of the offset of the nozzle."
-msgstr "Coordenada Y del desplazamiento de la tobera."
+msgctxt "machine_extruder_cooling_fan_number label"
+msgid "Extruder Print Cooling Fan"
+msgstr "Ventilador de refrigeración de impresión del extrusor"
 
 #: /fdmextruder.def.json
 msgctxt "machine_extruder_start_code label"
 msgid "Extruder Start G-Code"
 msgstr "GCode inicial del extrusor"
 
-#: /fdmextruder.def.json
-msgctxt "machine_extruder_start_code description"
-msgid "Start g-code to execute when switching to this extruder."
-msgstr "Iniciar GCode para ejecutarlo al cambiar a este extrusor."
-
 #: /fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_abs label"
 msgid "Extruder Start Position Absolute"
 msgstr "Posición de inicio absoluta del extrusor"
 
-#: /fdmextruder.def.json
-msgctxt "machine_extruder_start_pos_abs description"
-msgid ""
-"Make the extruder starting position absolute rather than relative to the "
-"last-known location of the head."
-msgstr "El extrusor se coloca en la posición de inicio absoluta según la última ubicación conocida del cabezal."
-
 #: /fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_x label"
 msgid "Extruder Start Position X"
 msgstr "Posición de inicio del extrusor sobre el eje X"
 
-#: /fdmextruder.def.json
-msgctxt "machine_extruder_start_pos_x description"
-msgid "The x-coordinate of the starting position when turning the extruder on."
-msgstr "Coordenada X de la posición de inicio cuando se enciende el extrusor."
-
 #: /fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_y label"
 msgid "Extruder Start Position Y"
 msgstr "Posición de inicio del extrusor sobre el eje Y"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_start_pos_y description"
-msgid "The y-coordinate of the starting position when turning the extruder on."
-msgstr "Coordenada Y de la posición de inicio cuando se enciende el extrusor."
+msgctxt "machine_settings label"
+msgid "Machine"
+msgstr "Máquina"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_code label"
-msgid "Extruder End G-Code"
-msgstr "GCode final del extrusor"
+msgctxt "machine_settings description"
+msgid "Machine specific settings"
+msgstr "Ajustes específicos de la máquina"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_code description"
-msgid "End g-code to execute when switching away from this extruder."
-msgstr "Finalizar GCode para ejecutarlo al cambiar desde este extrusor."
+msgctxt "machine_extruder_end_pos_abs description"
+msgid "Make the extruder ending position absolute rather than relative to the last-known location of the head."
+msgstr "La posición final del extrusor se considera absoluta, en lugar de relativa a la última ubicación conocida del cabezal."
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_pos_abs label"
-msgid "Extruder End Position Absolute"
-msgstr "Posición final absoluta del extrusor"
+msgctxt "machine_extruder_start_pos_abs description"
+msgid "Make the extruder starting position absolute rather than relative to the last-known location of the head."
+msgstr "El extrusor se coloca en la posición de inicio absoluta según la última ubicación conocida del cabezal."
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_pos_abs description"
-msgid ""
-"Make the extruder ending position absolute rather than relative to the last-"
-"known location of the head."
-msgstr "La posición final del extrusor se considera absoluta, en lugar de relativa a la última ubicación conocida del cabezal."
+msgctxt "material description"
+msgid "Material"
+msgstr "Material"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_pos_x label"
-msgid "Extruder End Position X"
-msgstr "Posición de fin del extrusor sobre el eje X"
+msgctxt "material label"
+msgid "Material"
+msgstr "Material"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_pos_x description"
-msgid "The x-coordinate of the ending position when turning the extruder off."
-msgstr "Coordenada X de la posición de fin cuando se apaga el extrusor."
+msgctxt "machine_nozzle_size label"
+msgid "Nozzle Diameter"
+msgstr "Diámetro de la tobera"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_pos_y label"
-msgid "Extruder End Position Y"
-msgstr "Posición de fin del extrusor sobre el eje Y"
+msgctxt "machine_nozzle_id label"
+msgid "Nozzle ID"
+msgstr "Id. de la tobera"
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_end_pos_y description"
-msgid "The y-coordinate of the ending position when turning the extruder off."
-msgstr "Coordenada Y de la posición de fin cuando se apaga el extrusor."
+msgctxt "machine_nozzle_offset_x label"
+msgid "Nozzle X Offset"
+msgstr "Desplazamiento de la tobera sobre el eje X"
 
 #: /fdmextruder.def.json
-msgctxt "extruder_prime_pos_z label"
-msgid "Extruder Prime Z Position"
-msgstr "Posición de preparación del extrusor sobre el eje Z"
+msgctxt "machine_nozzle_offset_y label"
+msgid "Nozzle Y Offset"
+msgstr "Desplazamiento de la tobera sobre el eje Y"
 
 #: /fdmextruder.def.json
-msgctxt "extruder_prime_pos_z description"
-msgid ""
-"The Z coordinate of the position where the nozzle primes at the start of "
-"printing."
-msgstr "Coordenada Z de la posición en la que la tobera queda preparada al inicio de la impresión."
+msgctxt "machine_extruder_start_code description"
+msgid "Start g-code to execute when switching to this extruder."
+msgstr "Iniciar GCode para ejecutarlo al cambiar a este extrusor."
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_cooling_fan_number label"
-msgid "Extruder Print Cooling Fan"
-msgstr "Ventilador de refrigeración de impresión del extrusor"
+msgctxt "extruder_prime_pos_x description"
+msgid "The X coordinate of the position where the nozzle primes at the start of printing."
+msgstr "Coordenada X de la posición en la que la tobera se coloca al inicio de la impresión."
 
 #: /fdmextruder.def.json
-msgctxt "machine_extruder_cooling_fan_number description"
-msgid ""
-"The number of the print cooling fan associated with this extruder. Only "
-"change this from the default value of 0 when you have a different print "
-"cooling fan for each extruder."
-msgstr "Número del ventilador de refrigeración de impresión asociado al extrusor. Modifique el valor predeterminado 0 solo cuando disponga de un ventilador de"
-" refrigeración de impresión diferente para cada extrusor."
+msgctxt "extruder_prime_pos_y description"
+msgid "The Y coordinate of the position where the nozzle primes at the start of printing."
+msgstr "Coordenada Y de la posición en la que la tobera se coloca al inicio de la impresión."
 
 #: /fdmextruder.def.json
-msgctxt "platform_adhesion label"
-msgid "Build Plate Adhesion"
-msgstr "Adherencia de la placa de impresión"
+msgctxt "extruder_prime_pos_z description"
+msgid "The Z coordinate of the position where the nozzle primes at the start of printing."
+msgstr "Coordenada Z de la posición en la que la tobera queda preparada al inicio de la impresión."
 
 #: /fdmextruder.def.json
-msgctxt "platform_adhesion description"
-msgid "Adhesion"
-msgstr "Adherencia"
+msgctxt "extruder_nr description"
+msgid "The extruder train used for printing. This is used in multi-extrusion."
+msgstr "El tren extrusor que se utiliza para imprimir. Se emplea en la extrusión múltiple."
 
 #: /fdmextruder.def.json
-msgctxt "extruder_prime_pos_x label"
-msgid "Extruder Prime X Position"
-msgstr "Posición de preparación del extrusor sobre el eje X"
+msgctxt "machine_nozzle_size description"
+msgid "The inner diameter of the nozzle. Change this setting when using a non-standard nozzle size."
+msgstr "Diámetro interior de la tobera. Cambie este ajuste cuando utilice un tamaño de tobera no estándar."
 
 #: /fdmextruder.def.json
-msgctxt "extruder_prime_pos_x description"
-msgid ""
-"The X coordinate of the position where the nozzle primes at the start of "
-"printing."
-msgstr "Coordenada X de la posición en la que la tobera se coloca al inicio de la impresión."
+msgctxt "machine_nozzle_id description"
+msgid "The nozzle ID for an extruder train, such as \"AA 0.4\" and \"BB 0.8\"."
+msgstr "Id. de la tobera de un tren extrusor, como \"AA 0.4\" y \"BB 0.8\"."
 
 #: /fdmextruder.def.json
-msgctxt "extruder_prime_pos_y label"
-msgid "Extruder Prime Y Position"
-msgstr "Posición de preparación del extrusor sobre el eje Y"
+msgctxt "machine_extruder_cooling_fan_number description"
+msgid "The number of the print cooling fan associated with this extruder. Only change this from the default value of 0 when you have a different print cooling fan for each extruder."
+msgstr "Número del ventilador de refrigeración de impresión asociado al extrusor. Modifique el valor predeterminado 0 solo cuando disponga de un ventilador de refrigeración de impresión diferente para cada extrusor."
 
 #: /fdmextruder.def.json
-msgctxt "extruder_prime_pos_y description"
-msgid ""
-"The Y coordinate of the position where the nozzle primes at the start of "
-"printing."
-msgstr "Coordenada Y de la posición en la que la tobera se coloca al inicio de la impresión."
+msgctxt "machine_extruder_end_pos_x description"
+msgid "The x-coordinate of the ending position when turning the extruder off."
+msgstr "Coordenada X de la posición de fin cuando se apaga el extrusor."
 
 #: /fdmextruder.def.json
-msgctxt "material label"
-msgid "Material"
-msgstr "Material"
+msgctxt "machine_nozzle_offset_x description"
+msgid "The x-coordinate of the offset of the nozzle."
+msgstr "Coordenada X del desplazamiento de la tobera."
 
 #: /fdmextruder.def.json
-msgctxt "material description"
-msgid "Material"
-msgstr "Material"
+msgctxt "machine_extruder_start_pos_x description"
+msgid "The x-coordinate of the starting position when turning the extruder on."
+msgstr "Coordenada X de la posición de inicio cuando se enciende el extrusor."
 
 #: /fdmextruder.def.json
-msgctxt "material_diameter label"
-msgid "Diameter"
-msgstr "Diámetro"
+msgctxt "machine_extruder_end_pos_y description"
+msgid "The y-coordinate of the ending position when turning the extruder off."
+msgstr "Coordenada Y de la posición de fin cuando se apaga el extrusor."
 
 #: /fdmextruder.def.json
-msgctxt "material_diameter description"
-msgid ""
-"Adjusts the diameter of the filament used. Match this value with the "
-"diameter of the used filament."
-msgstr "Ajusta el diámetro del filamento utilizado. Este valor debe coincidir con el diámetro del filamento utilizado."
+msgctxt "machine_nozzle_offset_y description"
+msgid "The y-coordinate of the offset of the nozzle."
+msgstr "Coordenada Y del desplazamiento de la tobera."
+
+#: /fdmextruder.def.json
+msgctxt "machine_extruder_start_pos_y description"
+msgid "The y-coordinate of the starting position when turning the extruder on."
+msgstr "Coordenada Y de la posición de inicio cuando se enciende el extrusor."