|
|
@@ -3288,6 +3288,18 @@
|
|
|
"settable_per_mesh": false,
|
|
|
"settable_per_extruder": false
|
|
|
},
|
|
|
+ "retraction_combing_max_distance":
|
|
|
+ {
|
|
|
+ "label": "Max Comb Distance With No Retract",
|
|
|
+ "description": "When non-zero, combing travel moves that are longer than this distance will use retraction.",
|
|
|
+ "unit": "mm",
|
|
|
+ "type": "float",
|
|
|
+ "default_value": 0,
|
|
|
+ "minimum_value": "0",
|
|
|
+ "enabled": "resolveOrValue('retraction_combing') != 'off'",
|
|
|
+ "settable_per_mesh": false,
|
|
|
+ "settable_per_extruder": true
|
|
|
+ },
|
|
|
"travel_retract_before_outer_wall":
|
|
|
{
|
|
|
"label": "Retract Before Outer Wall",
|
|
|
@@ -5532,6 +5544,20 @@
|
|
|
"maximum_value_warning": "0.1",
|
|
|
"settable_per_mesh": true
|
|
|
},
|
|
|
+ "meshfix_maximum_travel_resolution":
|
|
|
+ {
|
|
|
+ "label": "Maximum Travel Resolution",
|
|
|
+ "description": "The minimum size of a travel line segment after slicing. If you increase this, the travel moves will have less smooth corners. This may allow the printer to keep up with the speed it has to process g-code, but it may cause model avoidance to become less accurate.",
|
|
|
+ "type": "float",
|
|
|
+ "unit": "mm",
|
|
|
+ "default_value": 0.02,
|
|
|
+ "value": "meshfix_maximum_resolution * speed_travel / speed_print",
|
|
|
+ "minimum_value": "0.001",
|
|
|
+ "minimum_value_warning": "0.005",
|
|
|
+ "maximum_value_warning": "1",
|
|
|
+ "settable_per_mesh": false,
|
|
|
+ "settable_per_extruder": true
|
|
|
+ },
|
|
|
"support_skip_some_zags":
|
|
|
{
|
|
|
"label": "Break Up Support In Chunks",
|
Diego Prado Gesto