D5: Moved loading files code

cura/CuraApplication.py

@@ -539,9 +539,6 @@ class CuraApplication(QtApplication):
 
             qmlRegisterType(QUrl.fromLocalFile(path), "Cura", 1, 0, type_name)
 
-    loadingFiles = []
-    non_sliceable_extensions = [".gcode", ".g"]
-
     changeLayerViewSignal = pyqtSignal()
 
     def changeToLayerView(self):
@@ -551,63 +548,6 @@ class CuraApplication(QtApplication):
         view.setLayer(999999)
         view.calculateMaxLayers()
 
-    @pyqtSlot(QUrl)
-    def loadFile(self, file):
-        scene = self.getController().getScene()
-
-        if not file.isValid():
-            return
-
-        for node in DepthFirstIterator(scene.getRoot()):
-            if hasattr(node, "gcode") and getattr(node, "gcode") is True:
-                self.deleteAll()
-                break
-
-        f = file.toLocalFile()
-        extension = os.path.splitext(f)[1]
-        filename = os.path.basename(f)
-        if len(self.loadingFiles) > 0:
-            # If a non-slicable file is already being loaded, we prevent loading of any further non-slicable files
-            if extension.lower() in self.non_sliceable_extensions:
-                message = Message(
-                    catalog.i18nc("@info:status", "Only one G-code file can be loaded at a time. Skipped importing {0}",
-                                  filename))
-                message.show()
-                return
-            # If file being loaded is non-slicable file, then prevent loading of any other files
-            extension = os.path.splitext(self.loadingFiles[0])[1]
-            if extension.lower() in self.non_sliceable_extensions:
-                message = Message(
-                    catalog.i18nc("@info:status",
-                                  "Can't open any other file if G-code is loading. Skipped importing {0}",
-                                  filename))
-                message.show()
-                return
-
-        self.loadingFiles.append(f)
-
-        job = ReadMeshJob(f)
-        job.finished.connect(self._readMeshFinished)
-        job.start()
-
-    def _readMeshFinished(self, job):
-        node = job.getResult()
-        filename = job.getFileName()
-        self.loadingFiles.remove(filename)
-
-        if node != None:
-            node.setSelectable(True)
-            node.setName(os.path.basename(filename))
-
-            extension = os.path.splitext(filename)[1]
-            if extension.lower() in self.non_sliceable_extensions:
-                self.changeLayerViewSignal.emit()
-
-            op = AddSceneNodeOperation(node, self.getController().getScene().getRoot())
-            op.push()
-
-            self.getController().getScene().sceneChanged.emit(node)
-
     def onSelectionChanged(self):
         if Selection.hasSelection():
             if self.getController().getActiveTool():

plugins/CuraEngineBackend/CuraEngineBackend.py

@@ -188,6 +188,13 @@ class CuraEngineBackend(Backend):
         self._start_slice_job.start()
         self._start_slice_job.finished.connect(self._onStartSliceCompleted)
 
+    def pauseSlicing(self):
+        self.close()
+        self.backendStateChange.emit(BackendState.SlicingDisabled)
+
+    def continueSlicing(self):
+        self.backendStateChange.emit(BackendState.NotStarted)
+
     def _onBackendStateChanged(self, state):
         if state == BackendState.SlicingDisabled:
             self._pause_slicing = True

plugins/GCodeReader/GCodeReader.py

@@ -22,6 +22,7 @@ from cura.LayerPolygon import LayerPolygon
 
 import numpy
 import math
+import re
 
 
 class GCodeReader(MeshReader):
@@ -39,7 +40,9 @@ class GCodeReader(MeshReader):
         n = line.find(code) + len(code)
         if n < 1:
             return None
-        m = line.find(' ', n)
+        pattern = re.compile("[;\s]")
+        match = pattern.search(line, n)
+        m = match.start() if math is not None else -1
         try:
             if m < 0:
                 return line[n:]
@@ -66,23 +69,18 @@ class GCodeReader(MeshReader):
             self._cancelled = True
 
     def _onParentChanged(self, node):
-        backend = Application.getInstance().getBackend()
         if self._scene_node is not None and self._scene_node.getParent() is None:
             self._scene_node = None
-            backend.backendStateChange.emit(BackendState.NotStarted)
+            Application.getInstance().getBackend().continueSlicing()
             Application.getInstance().setHideSettings(False)
             Application.getInstance().getPrintInformation().setPreSliced(False)
-        # else:
-        #     backend.backendStateChange.emit(BackendState.SlicingDisabled)
-        #     Application.getInstance().getPrintInformation().setPreSliced(True)
-        #     Application.getInstance().setHideSettings(True)
 
     @staticmethod
     def _getNullBoundingBox():
         return AxisAlignedBox(minimum=Vector(0, 0, 0), maximum=Vector(10, 10, 10))
 
     @staticmethod
-    def _createPolygon(layer_data, path, layer_id, extruder):
+    def _createPolygon(layer_data, path, layer_id, extruder, thickness):
         countvalid = 0
         for point in path:
             if point[3] > 0:
@@ -92,7 +90,7 @@ class GCodeReader(MeshReader):
         try:
             layer_data.addLayer(layer_id)
             layer_data.setLayerHeight(layer_id, path[0][1])
-            layer_data.setLayerThickness(layer_id, 0.25)
+            layer_data.setLayerThickness(layer_id, thickness)
             this_layer = layer_data.getLayer(layer_id)
         except ValueError:
             return False
@@ -128,9 +126,7 @@ class GCodeReader(MeshReader):
         self._scene_node.gcode = True
         self._scene_node.parentChanged.connect(self._onParentChanged)
 
-        backend = Application.getInstance().getBackend()
-        backend.close()
-        backend.backendStateChange.emit(BackendState.SlicingDisabled)
+        Application.getInstance().getBackend().pauseSlicing()
 
         glist = []
         Application.getInstance().getController().getScene().gcode_list = glist
@@ -155,6 +151,7 @@ class GCodeReader(MeshReader):
             current_z = 0
             current_e = 0
             current_layer = 0
+            prev_z = 0
 
             self._message = Message(catalog.i18nc("@info:status", "Parsing GCODE"), lifetime=0)
             self._message.setProgress(0)
@@ -188,6 +185,7 @@ class GCodeReader(MeshReader):
                         if z is not None:
                             if not current_z == z:
                                 z_changed = True
+                                prev_z = current_z
                             current_z = z
                         if e is not None:
                             if e > current_e:
@@ -196,10 +194,10 @@ class GCodeReader(MeshReader):
                                 current_path.append([current_x, current_y, current_z, LayerPolygon.MoveRetractionType])  # retraction
                             current_e = e
                         else:
-                            current_path.append([current_x, current_y, current_z, LayerPolygon.NoneType])
+                            current_path.append([current_x, current_y, current_z, LayerPolygon.MoveCombingType])
                         if z_changed:
                             if len(current_path) > 1 and current_z > 0:
-                                if self._createPolygon(layer_data_builder, current_path, current_layer, current_extruder):
+                                if self._createPolygon(layer_data_builder, current_path, current_layer, current_extruder, math.fabs(current_z - prev_z)):
                                     current_layer += 1
                                 current_path.clear()
                             else:
@@ -231,14 +229,14 @@ class GCodeReader(MeshReader):
                 if T is not None:
                     current_extruder = T
                     if len(current_path) > 1 and current_z > 0:
-                        if self._createPolygon(layer_data_builder, current_path, current_layer, current_extruder):
+                        if self._createPolygon(layer_data_builder, current_path, current_layer, current_extruder, math.fabs(current_z - prev_z)):
                             current_layer += 1
                         current_path.clear()
                     else:
                         current_path.clear()
 
             if len(current_path) > 1 and current_z > 0:
-                if self._createPolygon(layer_data_builder, current_path, current_layer, current_extruder):
+                if self._createPolygon(layer_data_builder, current_path, current_layer, current_extruder, math.fabs(current_z - prev_z)):
                     current_layer += 1
                 current_path.clear()
 

resources/qml/Cura.qml

@@ -275,7 +275,7 @@ UM.MainWindow
                             // There is no endsWith in this version of JS...
                             if ((drop.urls[i].length <= 12) || (drop.urls[i].substring(drop.urls[i].length-12) !== ".curaprofile")) {
                                 // Drop an object
-                                Printer.loadFile(drop.urls[i]);
+                                UM.MeshFileHandler.readLocalFile(drop.urls[i]);
                                 if (imported_model == -1)
                                 {
                                     imported_model = i;
@@ -737,7 +737,7 @@ UM.MainWindow
 
             for(var i in fileUrls)
             {
-                Printer.loadFile(fileUrls[i])
+                UM.MeshFileHandler.readLocalFile(fileUrls[i])
             }
 
             var meshName = backgroundItem.getMeshName(fileUrls[0].toString())

resources/qml/Menus/RecentFilesMenu.qml

@@ -26,7 +26,7 @@ Menu
                 return (index + 1) + ". " + path.slice(path.lastIndexOf("/") + 1);
             }
             onTriggered: {
-                Printer.loadFile(modelData);
+                UM.MeshFileHandler.readLocalFile(modelData);
                 var meshName = backgroundItem.getMeshName(modelData.toString())
                 backgroundItem.hasMesh(decodeURIComponent(meshName))
             }