- Removed step correction from z shrinkage compensation for the Method X

- Changed step size tfrom 0.2mm to 0.203mm for Method X
- Added material compensations for ABS-R and ABS-CF
- New resolve formula in fdmprinter.def.json to not use the shrinkage factors of support materials

resources/definitions/fdmprinter.def.json

@@ -2602,7 +2602,7 @@
                     "maximum_value_warning": "120",
                     "settable_per_mesh": false,
                     "settable_per_extruder": false,
-                    "resolve": "sum(extruderValues(\"material_shrinkage_percentage\")) / len(extruderValues(\"material_shrinkage_percentage\"))",
+                    "resolve": "max(extruderValues(\"material_shrinkage_percentage\")) if any(extruderValues('material_is_support_material')) else sum(extruderValues(\"material_shrinkage_percentage\")) / len(extruderValues(\"material_shrinkage_percentage\"))",
                     "children":
                     {
                         "material_shrinkage_percentage_xy":
@@ -2618,7 +2618,7 @@
                             "maximum_value_warning": "120",
                             "settable_per_mesh": false,
                             "settable_per_extruder": false,
-                            "resolve": "sum(extruderValues(\"material_shrinkage_percentage_xy\")) / len(extruderValues(\"material_shrinkage_percentage_xy\"))",
+                            "resolve": "max(extruderValues(\"material_shrinkage_percentage\")) if any(extruderValues('material_is_support_material')) else sum(extruderValues(\"material_shrinkage_percentage_xy\")) / len(extruderValues(\"material_shrinkage_percentage_xy\"))",
                             "value": "material_shrinkage_percentage"
                         },
                         "material_shrinkage_percentage_z":
@@ -2634,7 +2634,7 @@
                             "maximum_value_warning": "120",
                             "settable_per_mesh": false,
                             "settable_per_extruder": false,
-                            "resolve": "sum(extruderValues(\"material_shrinkage_percentage_z\")) / len(extruderValues(\"material_shrinkage_percentage_z\"))",
+                            "resolve": "max(extruderValues(\"material_shrinkage_percentage_z\")) if any(extruderValues('material_is_support_material')) else sum(extruderValues(\"material_shrinkage_percentage_z\")) / len(extruderValues(\"material_shrinkage_percentage_z\"))",
                             "value": "material_shrinkage_percentage"
                         }
                     }

resources/definitions/ultimaker_method_base.def.json

@@ -337,7 +337,6 @@
         "material_initial_print_temperature": { "value": "material_print_temperature-10" },
         "material_print_temperature": { "value": "default_material_print_temperature" },
         "material_shrinkage_percentage": { "enabled": true },
-        "material_shrinkage_percentage_z": { "resolve": "0.9852*sum(extruderValues(\"material_shrinkage_percentage_z\")) / len(extruderValues(\"material_shrinkage_percentage_z\"))" },
         "min_wall_line_width": { "value": 0.4 },
         "minimum_support_area": { "value": 0.1 },
         "multiple_mesh_overlap": { "value": 0 },

resources/definitions/ultimaker_methodxl.def.json

@@ -66,7 +66,6 @@
         "machine_height": { "default_value": 320 },
         "machine_name": { "default_value": "UltiMaker Method XL" },
         "machine_width": { "default_value": 410 },
-        "material_shrinkage_percentage_z": { "resolve": "sum(extruderValues(\"material_shrinkage_percentage_z\")) / len(extruderValues(\"material_shrinkage_percentage_z\"))" },
         "prime_tower_position_x": { "value": "(305 - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_x'))), 1)) - (305 / 2)" },
         "prime_tower_position_y": { "value": "305 - prime_tower_size - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_y'))), 1) - (305 / 2)" },
         "speed_travel": { "value": 500 }

resources/quality/ultimaker_methodx/um_methodx_global_Draft_Quality.inst.cfg

@@ -11,5 +11,5 @@ type = quality
 weight = -2
 
 [values]
-layer_height = 0.2  ## in reality this is 0.203, compensate this in the z scaling factor of the extruder
+layer_height = 0.203