|
|
@@ -1614,7 +1614,7 @@
|
|
|
"infill_overlap":
|
|
|
{
|
|
|
"label": "Infill Overlap Percentage",
|
|
|
- "description": "The amount of overlap between the infill and the walls. A slight overlap allows the walls to connect firmly to the infill.",
|
|
|
+ "description": "The amount of overlap between the infill and the walls as a percentage of the infill line width. A slight overlap allows the walls to connect firmly to the infill.",
|
|
|
"unit": "%",
|
|
|
"type": "float",
|
|
|
"default_value": 10,
|
|
|
@@ -1635,7 +1635,7 @@
|
|
|
"default_value": 0.04,
|
|
|
"minimum_value_warning": "-0.5 * machine_nozzle_size",
|
|
|
"maximum_value_warning": "machine_nozzle_size",
|
|
|
- "value": "0.5 * ( infill_line_width + (wall_line_width_x if wall_line_count > 1 else wall_line_width_0) ) * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0",
|
|
|
+ "value": "0.5 * (infill_line_width + (wall_line_width_x if wall_line_count > 1 else wall_line_width_0)) * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0",
|
|
|
"enabled": "infill_sparse_density > 0 and infill_pattern != 'concentric'",
|
|
|
"settable_per_mesh": true
|
|
|
}
|
|
|
@@ -1644,7 +1644,7 @@
|
|
|
"skin_overlap":
|
|
|
{
|
|
|
"label": "Skin Overlap Percentage",
|
|
|
- "description": "The amount of overlap between the skin and the walls as a percentage of the line width. A slight overlap allows the walls to connect firmly to the skin. This is a percentage of the average line widths of the skin lines and the innermost wall.",
|
|
|
+ "description": "The amount of overlap between the skin and the walls as a percentage of the skin line width. A slight overlap allows the walls to connect firmly to the skin. This is a percentage of the average line widths of the skin lines and the innermost wall.",
|
|
|
"unit": "%",
|
|
|
"type": "float",
|
|
|
"default_value": 5,
|
|
|
@@ -1665,7 +1665,7 @@
|
|
|
"default_value": 0.02,
|
|
|
"minimum_value_warning": "-0.5 * machine_nozzle_size",
|
|
|
"maximum_value_warning": "machine_nozzle_size",
|
|
|
- "value": "0.5 * ( skin_line_width + (wall_line_width_x if wall_line_count > 1 else wall_line_width_0) ) * skin_overlap / 100 if top_bottom_pattern != 'concentric' else 0",
|
|
|
+ "value": "0.5 * (skin_line_width + (wall_line_width_x if wall_line_count > 1 else wall_line_width_0)) * skin_overlap / 100 if top_bottom_pattern != 'concentric' else 0",
|
|
|
"enabled": "top_bottom_pattern != 'concentric'",
|
|
|
"settable_per_mesh": true
|
|
|
}
|
Ghostkeeper