Update nwa3d_a5_best.inst.cfg

Changed True and False syntax

resources/quality/nwa3d_a5/nwa3d_a5_best.inst.cfg

@@ -27,30 +27,30 @@ bottom_layers = 3
 top_bottom_pattern = lines
 top_bottom_pattern_0 = lines
 wall_0_inset = 0
-optimize_wall_printing_order = false
-outer_inset_first = false
-alternate_extra_perimeter = false
-travel_compensate_overlapping_walls_enabled = true
-travel_compensate_overlapping_walls_0_enabled = true
-travel_compensate_overlapping_walls_x_enabled = true
+optimize_wall_printing_order = False
+outer_inset_first = False
+alternate_extra_perimeter = False
+travel_compensate_overlapping_walls_enabled = True
+travel_compensate_overlapping_walls_0_enabled = True
+travel_compensate_overlapping_walls_x_enabled = True
 wall_min_flow = 0
 fill_perimeter_gaps = everywhere
-filter_out_tiny_gaps = true
-fill_outline_gaps = true
+filter_out_tiny_gaps = True
+fill_outline_gaps = True
 xy_offset = 0
-skin_no_small_gaps_heuristic = true
+skin_no_small_gaps_heuristic = True
 skin_outline_count = 1
-ironing_enabled = false
+ironing_enabled = False
 infill_sparse_density = 20
-zig_zaggify_infill = false
+zig_zaggify_infill = False
 infill_multiplier = 1
 infill_wall_line_count = 0
 infill_overlap = 10
 skin_overlap = 5
 infill_wipe_dist = 0.1
 gradual_infill_steps = 0
-infill_before_walls = false
-infill_support_enabled = false
+infill_before_walls = False
+infill_support_enabled = False
 max_skin_angle_for_expansion = 90
 material_diameter = 1.75
 default_material_print_temperature = 220
@@ -61,15 +61,15 @@ material_final_print_temperature = 220
 default_material_bed_temperature = 0
 material_bed_temperature = 0
 material_flow = 100
-retraction_enable = true
-retract_at_layer_change = false
+retraction_enable = True
+retract_at_layer_change = False
 retraction_amount = 5
 retraction_speed = 45
 retraction_extra_prime_amount = 0
 retraction_min_travel = 0.8
 retraction_count_max = 90
 retraction_extrusion_window = 5
-limit_support_retractions = true
+limit_support_retractions = True
 switch_extruder_retraction_amount = 16
 switch_extruder_retraction_speeds = 20
 speed_print = 30
@@ -78,28 +78,28 @@ speed_layer_0 = 10
 speed_travel_layer_0 = 50
 max_feedrate_z_override = 0
 speed_slowdown_layers = 2
-speed_equalize_flow_enabled = false
-acceleration_enabled = false
+speed_equalize_flow_enabled = False
+acceleration_enabled = False
 acceleration_roofing = 3000
-jerk_enabled = false
+jerk_enabled = False
 retraction_combing = off
-travel_retract_before_outer_wall = false
-retraction_hop_enabled = false
-cool_fan_enabled = true
+travel_retract_before_outer_wall = False
+retraction_hop_enabled = False
+cool_fan_enabled = True
 cool_fan_speed = 100
 cool_fan_speed_0 = 0
 cool_fan_full_at_height = 0.24
 cool_fan_full_at_layer = 3
-cool_lift_head = false
-support_enable = true
+cool_lift_head = False
+support_enable = True
 support_type = everywhere
 support_angle = 50
 support_pattern = grid
 support_wall_count = 0
-zig_zaggify_support = false
+zig_zaggify_support = False
 support_infill_rate = 20
 support_infill_angle = 0
-support_brim_enable = true
+support_brim_enable = True
 support_brim_line_count = 5
 support_z_distance = 0.18
 support_xy_distance = 0.7
@@ -109,24 +109,24 @@ support_bottom_stair_step_width = 5.0
 support_join_distance = 2.0
 support_offset = 0.2
 gradual_support_infill_steps = 0
-support_roof_enable = true
-support_bottom_enable = false
+support_roof_enable = True
+support_bottom_enable = False
 support_roof_height = 0.45
 support_roof_density = 45
 support_roof_pattern = lines
-support_fan_enable = false
-support_use_towers = true
+support_fan_enable = False
+support_use_towers = True
 support_tower_diameter = 3
 support_tower_roof_angle = 65
 adhesion_type = skirt
 skirt_line_count = 2
 skirt_gap = 3
-meshfix_union_all = true
-meshfix_union_all_remove_holes = false
-meshfix_extensive_stitching = false
-meshfix_keep_open_polygons = false
+meshfix_union_all = True
+meshfix_union_all_remove_holes = False
+meshfix_extensive_stitching = False
+meshfix_keep_open_polygons = False
 multiple_mesh_overlap = 0.16
-carve_multiple_volumes = false
+carve_multiple_volumes = False