JSON fix: new resolve functions (CURA-2410)

resources/definitions/fdmprinter.def.json

@@ -550,6 +550,7 @@
                     "unit": "mm",
                     "type": "float",
                     "default_value": 0.3,
+                    "resolve": "sum(extruderValues('layer_height_0')) / len(extruderValues('layer_height_0'))",
                     "minimum_value": "0.001",
                     "minimum_value_warning": "0.04",
                     "maximum_value_warning": "0.8 * min(extruderValues('machine_nozzle_size'))",
@@ -1640,6 +1641,7 @@
                     "description": "The first few layers are printed slower than the rest of the model, to get better adhesion to the build plate and improve the overall success rate of prints. The speed is gradually increased over these layers.",
                     "type": "int",
                     "default_value": 2,
+                    "resolve": "sum(extruderValues('speed_slowdown_layers')) / len(extruderValues('speed_slowdown_layers'))",
                     "minimum_value": "0",
                     "maximum_value_warning": "1.0 / layer_height",
                     "settable_per_mesh": false,
@@ -1675,6 +1677,7 @@
                     "description": "Enables adjusting the print head acceleration. Increasing the accelerations can reduce printing time at the cost of print quality.",
                     "type": "bool",
                     "default_value": false,
+                    "resolve": "any(extruderValues('acceleration_enabled'))",
                     "settable_per_mesh": false,
                     "settable_per_extruder": false
                 },
@@ -1896,6 +1899,7 @@
                     "description": "Enables adjusting the jerk of print head when the velocity in the X or Y axis changes. Increasing the jerk can reduce printing time at the cost of print quality.",
                     "type": "bool",
                     "default_value": false,
+                    "resolve": "any(extruderValues('jerk_enabled'))",
                     "settable_per_mesh": false,
                     "settable_per_extruder": false
                 },
@@ -2133,6 +2137,7 @@
                         "noskin": "No Skin"
                     },
                     "default_value": "all",
+                    "resolve": "'noskin' if 'noskin' in extruderValues('retraction_combing') else ('all' if 'all' in extruderValues('retraction_combing') else 'off')",
                     "settable_per_mesh": true
                 },
                 "travel_avoid_other_parts":
@@ -2326,6 +2331,7 @@
                         "everywhere": "Everywhere"
                     },
                     "default_value": "everywhere",
+                    "resolve": "'everywhere' if 'everywhere' in extruderValues('support_type') else buildplate",
                     "enabled": "support_enable",
                     "settable_per_mesh": false,
                     "settable_per_extruder": false
@@ -3348,6 +3354,7 @@
                     "enabled": "resolveOrValue('prime_tower_enable')",
                     "default_value": 15,
                     "value": "15 if resolveOrValue('prime_tower_enable') else 0",
+                    "resolve": "max(extruderValues('prime_tower_size'))",
                     "minimum_value": "0",
                     "maximum_value": "min(0.5 * machine_width, 0.5 * machine_depth)",
                     "maximum_value_warning": "20",
@@ -3405,6 +3412,7 @@
                     "type": "bool",
                     "enabled": "resolveOrValue('prime_tower_enable')",
                     "default_value": true,
+                    "resolve": "any(extruderValues('prime_tower_wipe_enabled'))",
                     "settable_per_mesh": false,
                     "settable_per_extruder": false
                 },
@@ -3424,6 +3432,7 @@
                     "label": "Enable Ooze Shield",
                     "description": "Enable exterior ooze shield. This will create a shell around the model which is likely to wipe a second nozzle if it's at the same height as the first nozzle.",
                     "type": "bool",
+                    "resolve": "any(extruderValues('ooze_shield_enabled'))",
                     "default_value": false,
                     "settable_per_mesh": false,
                     "settable_per_extruder": false
@@ -3436,6 +3445,7 @@
                     "unit": "°",
                     "enabled": "ooze_shield_enabled",
                     "default_value": 60,
+                    "resolve": "min(extruderValues('ooze_shield_angle'))",
                     "minimum_value": "0",
                     "maximum_value": "90",
                     "settable_per_mesh": false,
@@ -3449,6 +3459,7 @@
                     "unit": "mm",
                     "enabled": "ooze_shield_enabled",
                     "default_value": 2,
+                    "resolve": "max(extruderValues('ooze_shield_dist'))",
                     "minimum_value": "0",
                     "maximum_value_warning": "30",
                     "settable_per_mesh": false,
@@ -3596,6 +3607,7 @@
                     "minimum_value": "0",
                     "maximum_value_warning": "100",
                     "default_value": 10,
+                    "resolve": "max(extruderValues('draft_shield_dist'))",
                     "enabled": "draft_shield_enabled",
                     "settable_per_mesh": false,
                     "settable_per_extruder": false
@@ -3611,6 +3623,7 @@
                         "limited": "Limited"
                     },
                     "default_value": "full",
+                    "resolve": "'full' if 'full' in extruderValues('draft_shield_height_limitation') else 'limited'",
                     "enabled": "draft_shield_enabled",
                     "settable_per_mesh": false,
                     "settable_per_extruder": false