Applied printer-linter format

resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.15mm.inst.cfg

@@ -20,11 +20,11 @@ build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 gradual_flow_discretisation_step_size = 0.1
 gradual_flow_enabled = True
-initial_layer_line_width_factor = 125
-max_flow_acceleration = 1
 gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
 jerk_print = 10
 material_flow_layer_0 = 90
+max_flow_acceleration = 1
 minimum_support_area = 4
 prime_tower_flow = 90
 prime_tower_min_volume = 15
@@ -40,3 +40,4 @@ support_offset = 3
 support_xy_distance = 2
 support_z_distance = 0
 switch_extruder_prime_speed = 10.0
+

resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.1mm.inst.cfg

@@ -20,11 +20,11 @@ build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 gradual_flow_discretisation_step_size = 0.1
 gradual_flow_enabled = True
-initial_layer_line_width_factor = 125
-max_flow_acceleration = 1
 gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
 jerk_print = 10
 material_flow_layer_0 = 90
+max_flow_acceleration = 1
 minimum_support_area = 4
 prime_tower_flow = 90
 prime_tower_min_volume = 15

resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.2mm.inst.cfg

@@ -20,11 +20,11 @@ build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 gradual_flow_discretisation_step_size = 0.1
 gradual_flow_enabled = True
-initial_layer_line_width_factor = 125
-max_flow_acceleration = 1
 gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
 jerk_print = 10
 material_flow_layer_0 = 90
+max_flow_acceleration = 1
 minimum_support_area = 4
 prime_tower_flow = 90
 prime_tower_min_volume = 15

resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.3mm.inst.cfg

@@ -20,11 +20,11 @@ build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 gradual_flow_discretisation_step_size = 0.1
 gradual_flow_enabled = True
-initial_layer_line_width_factor = 125
-max_flow_acceleration = 1
 gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
 jerk_print = 10
 material_flow_layer_0 = 90
+max_flow_acceleration = 1
 minimum_support_area = 4
 prime_tower_flow = 90
 prime_tower_min_volume = 15

resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.2mm.inst.cfg

@@ -20,11 +20,11 @@ build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 gradual_flow_discretisation_step_size = 0.1
 gradual_flow_enabled = True
-initial_layer_line_width_factor = 125
-max_flow_acceleration = 1
 gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
 jerk_print = 10
 material_flow_layer_0 = 90
+max_flow_acceleration = 1
 minimum_support_area = 4
 prime_tower_flow = 90
 prime_tower_min_volume = 15

resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.3mm.inst.cfg

@@ -20,11 +20,11 @@ build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 gradual_flow_discretisation_step_size = 0.1
 gradual_flow_enabled = True
-initial_layer_line_width_factor = 125
-max_flow_acceleration = 1
 gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
 jerk_print = 10
 material_flow_layer_0 = 90
+max_flow_acceleration = 1
 minimum_support_area = 4
 prime_tower_flow = 90
 prime_tower_min_volume = 15

resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.4mm.inst.cfg

@@ -20,11 +20,11 @@ build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 gradual_flow_discretisation_step_size = 0.1
 gradual_flow_enabled = True
-initial_layer_line_width_factor = 125
-max_flow_acceleration = 1
 gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
 jerk_print = 10
 material_flow_layer_0 = 90
+max_flow_acceleration = 1
 minimum_support_area = 4
 prime_tower_flow = 90
 prime_tower_min_volume = 15