Remove superfluous profile duplicates of all GreenTecPro colours for Weedo

We match these profiles by material type. Since they are all the same, we only need to retain one.

All other profiles than the black one weren't being loaded because all of these quality profiles had their 'material' metadata field set to be the black one.

Contributes to issue CURA-8469.

resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Anthrazit_Draft.inst.cfg

@@ -1,25 +0,0 @@
-[general]
-version = 4
-name = Draft
-definition = weedo_x40
-
-[metadata]
-setting_version = 17
-type = quality
-quality_type = draft
-weight = 0
-material = Extrudr_GreenTECPro_Black_175
-variant = 0.4mm Nozzle
-
-[values]
-speed_print = 60
-layer_height_0 = =round(layer_height * 1.25, 2)
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 5
-material_bed_temperature = =default_material_bed_temperature
-material_bed_temperature_layer_0= =material_bed_temperature + 10
-material_flow_layer_0 = =material_flow + 4
-skirt_brim_material_flow= =material_flow + 4
-material_standby_temperature = 100
-support_z_distance = 0.2
-support_xy_distance = 0.8

resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Anthrazit_Extra_Fine.inst.cfg

@@ -1,25 +0,0 @@
-[general]
-version = 4
-name = Extra Fine
-definition = weedo_x40
-
-[metadata]
-setting_version = 17
-type = quality
-quality_type = extra fine
-weight = 0
-material = Extrudr_GreenTECPro_Black_175
-variant = 0.4mm Nozzle
-
-[values]
-speed_print = 30
-material_print_temperature_layer_0 = =material_print_temperature + 10
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 5
-material_bed_temperature = =default_material_bed_temperature
-material_bed_temperature_layer_0= =material_bed_temperature + 10
-material_flow_layer_0 = =material_flow + 4
-skirt_brim_material_flow= =material_flow + 4
-material_standby_temperature = 100
-support_z_distance = 0.2
-support_xy_distance = 0.8

resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Anthrazit_Fine.inst.cfg

@@ -1,26 +0,0 @@
-[general]
-version = 4
-name = Fine
-definition = weedo_x40
-
-[metadata]
-setting_version = 17
-type = quality
-quality_type = fine
-weight = 0
-material = Extrudr_GreenTECPro_Black_175
-variant = 0.4mm Nozzle
-
-[values]
-speed_print = 40
-material_print_temperature_layer_0 = =material_print_temperature + 10
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 5
-material_bed_temperature = =default_material_bed_temperature
-material_bed_temperature_layer_0= =material_bed_temperature + 10
-material_flow_layer_0 = =material_flow + 4
-skirt_brim_material_flow= =material_flow + 4
-material_standby_temperature = 100
-support_z_distance = 0.2
-support_xy_distance = 0.8
-

resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Anthrazit_Normal.inst.cfg

@@ -1,43 +0,0 @@
-[general]
-version = 4
-name = Normal
-definition = weedo_x40
-
-[metadata]
-setting_version = 17
-type = quality
-quality_type = normal
-weight = 0
-material = Extrudr_GreenTECPro_Black_175
-variant = 0.4mm Nozzle
-
-[values]
-speed_print = 50
-material_print_temperature_layer_0 = =material_print_temperature + 10
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 5
-material_bed_temperature = =default_material_bed_temperature
-material_bed_temperature_layer_0= =material_bed_temperature + 10
-material_flow_layer_0 = =material_flow + 4
-skirt_brim_material_flow= =material_flow + 4
-material_standby_temperature = 100
-support_z_distance = 0.2
-support_xy_distance = 0.8
-        
-        
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-

resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Blue_Draft.inst.cfg

@@ -1,26 +0,0 @@
-[general]
-version = 4
-name = Draft
-definition = weedo_x40
-
-[metadata]
-setting_version = 17
-type = quality
-quality_type = draft
-weight = 0
-material = Extrudr_GreenTECPro_Black_175
-variant = 0.4mm Nozzle
-
-[values]
-speed_print = 60
-layer_height_0 = =round(layer_height * 1.25, 2)
-material_print_temperature_layer_0 = =material_print_temperature + 10
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 5
-material_bed_temperature = =default_material_bed_temperature
-material_bed_temperature_layer_0= =material_bed_temperature + 10
-material_flow_layer_0 = =material_flow + 4
-skirt_brim_material_flow= =material_flow + 4
-material_standby_temperature = 100
-support_z_distance = 0.2
-support_xy_distance = 0.8

resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Blue_Extra_Fine.inst.cfg

@@ -1,25 +0,0 @@
-[general]
-version = 4
-name = Extra Fine
-definition = weedo_x40
-
-[metadata]
-setting_version = 17
-type = quality
-quality_type = extra fine
-weight = 0
-material = Extrudr_GreenTECPro_Black_175
-variant = 0.4mm Nozzle
-
-[values]
-speed_print = 30
-material_print_temperature_layer_0 = =material_print_temperature + 10
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 5
-material_bed_temperature = =default_material_bed_temperature
-material_bed_temperature_layer_0= =material_bed_temperature + 10
-material_flow_layer_0 = =material_flow + 4
-skirt_brim_material_flow= =material_flow + 4
-material_standby_temperature = 100
-support_z_distance = 0.2
-support_xy_distance = 0.8

resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Blue_Fine.inst.cfg

@@ -1,27 +0,0 @@
-[general]
-version = 4
-name = Fine
-definition = weedo_x40
-
-[metadata]
-setting_version = 17
-type = quality
-quality_type = fine
-weight = 0
-material = Extrudr_GreenTECPro_Black_175
-variant = 0.4mm Nozzle
-
-[values]
-speed_print = 40
-material_print_temperature_layer_0 = =material_print_temperature + 10
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 5
-material_bed_temperature = =default_material_bed_temperature
-material_bed_temperature_layer_0= =material_bed_temperature + 10
-material_flow_layer_0 = =material_flow + 4
-skirt_brim_material_flow= =material_flow + 4
-material_standby_temperature = 100
-support_z_distance = 0.2
-support_xy_distance = 0.8
-
-

resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Blue_Normal.inst.cfg

@@ -1,39 +0,0 @@
-[general]
-version = 4
-name = Normal
-definition = weedo_x40
-
-[metadata]
-setting_version = 17
-type = quality
-quality_type = normal
-weight = 0
-material = Extrudr_GreenTECPro_Black_175
-variant = 0.4mm Nozzle
-
-[values]
-speed_print = 50
-material_print_temperature_layer_0 = =material_print_temperature + 10
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 5
-material_bed_temperature = =default_material_bed_temperature
-material_bed_temperature_layer_0= =material_bed_temperature + 10
-material_flow_layer_0 = =material_flow + 4
-skirt_brim_material_flow= =material_flow + 4
-material_standby_temperature = 100
-support_z_distance = 0.2
-support_xy_distance = 0.8
-
-
-
-
-
-
-
-
-
-
-
-
-
-

resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Nature_Draft.inst.cfg

@@ -1,26 +0,0 @@
-[general]
-version = 4
-name = Draft
-definition = weedo_x40
-
-[metadata]
-setting_version = 17
-type = quality
-quality_type = draft
-weight = 0
-material = Extrudr_GreenTECPro_Black_175
-variant = 0.4mm Nozzle
-
-[values]
-speed_print = 60
-layer_height_0 = =round(layer_height * 1.25, 2)
-material_print_temperature_layer_0 = =material_print_temperature + 10
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 5
-material_bed_temperature = =default_material_bed_temperature
-material_bed_temperature_layer_0= =material_bed_temperature + 10
-material_flow_layer_0 = =material_flow + 4
-skirt_brim_material_flow= =material_flow + 4
-material_standby_temperature = 100
-support_z_distance = 0.2
-support_xy_distance = 0.8

resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Nature_Extra_Fine.inst.cfg

@@ -1,25 +0,0 @@
-[general]
-version = 4
-name = Extra Fine
-definition = weedo_x40
-
-[metadata]
-setting_version = 17
-type = quality
-quality_type = extra fine
-weight = 0
-material = Extrudr_GreenTECPro_Black_175
-variant = 0.4mm Nozzle
-
-[values]
-speed_print = 30
-material_print_temperature_layer_0 = =material_print_temperature + 10
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 5
-material_bed_temperature = =default_material_bed_temperature
-material_bed_temperature_layer_0= =material_bed_temperature + 10
-material_flow_layer_0 = =material_flow + 4
-skirt_brim_material_flow= =material_flow + 4
-material_standby_temperature = 100
-support_z_distance = 0.2
-support_xy_distance = 0.8