|
|
@@ -635,16 +635,16 @@
|
|
|
"settable_per_mesh": false,
|
|
|
"settable_per_extruder": true
|
|
|
},
|
|
|
- "support_roof_line_width":
|
|
|
+ "support_interface_line_width":
|
|
|
{
|
|
|
- "label": "Support Roof Line Width",
|
|
|
- "description": "Width of a single support roof line.",
|
|
|
+ "label": "Support Interface Line Width",
|
|
|
+ "description": "Width of a single support interface line.",
|
|
|
"unit": "mm",
|
|
|
"default_value": 0.4,
|
|
|
"minimum_value": "0.0001",
|
|
|
"maximum_value_warning": "machine_nozzle_size * 2",
|
|
|
"type": "float",
|
|
|
- "enabled": "support_roof_enable",
|
|
|
+ "enabled": "support_interface_enable",
|
|
|
"value": "line_width",
|
|
|
"settable_per_mesh": false,
|
|
|
"settable_per_extruder": true
|
|
|
@@ -1463,17 +1463,17 @@
|
|
|
"settable_per_mesh": false,
|
|
|
"settable_per_extruder": true
|
|
|
},
|
|
|
- "speed_support_roof":
|
|
|
+ "speed_support_interface":
|
|
|
{
|
|
|
- "label": "Support Roof Speed",
|
|
|
- "description": "The speed at which the roofs of support are printed. Printing the support roof at lower speeds can improve overhang quality.",
|
|
|
+ "label": "Support Interface Speed",
|
|
|
+ "description": "The speed at which the roofs and bottoms of support are printed. Printing the them at lower speeds can improve overhang quality.",
|
|
|
"unit": "mm/s",
|
|
|
"type": "float",
|
|
|
"default_value": 40,
|
|
|
"minimum_value": "0.1",
|
|
|
"maximum_value": "299792458000",
|
|
|
"maximum_value_warning": "150",
|
|
|
- "enabled": "support_roof_enable and support_enable",
|
|
|
+ "enabled": "support_interface_enable and support_enable",
|
|
|
"value": "speed_support / 1.5",
|
|
|
"settable_per_mesh": false,
|
|
|
"settable_per_extruder": true
|
|
|
@@ -1694,9 +1694,9 @@
|
|
|
"settable_per_mesh": false,
|
|
|
"settable_per_extruder": true
|
|
|
},
|
|
|
- "acceleration_support_roof": {
|
|
|
- "label": "Support Roof Acceleration",
|
|
|
- "description": "The acceleration with which the roofs of support are printed. Printing the support roof at lower accelerations can improve overhang quality.",
|
|
|
+ "acceleration_support_interface": {
|
|
|
+ "label": "Support Interface Acceleration",
|
|
|
+ "description": "The acceleration with which the roofs and bottoms of support are printed. Printing them at lower accelerations can improve overhang quality.",
|
|
|
"unit": "mm/s²",
|
|
|
"type": "float",
|
|
|
"default_value": 3000,
|
|
|
@@ -1704,7 +1704,7 @@
|
|
|
"minimum_value": "0.1",
|
|
|
"minimum_value_warning": "100",
|
|
|
"maximum_value_warning": "10000",
|
|
|
- "enabled": "acceleration_enabled and support_roof_enable and support_enable",
|
|
|
+ "enabled": "acceleration_enabled and support_interface_enable and support_enable",
|
|
|
"settable_per_mesh": false,
|
|
|
"settable_per_extruder": true
|
|
|
}
|
|
|
@@ -1913,9 +1913,9 @@
|
|
|
"settable_per_mesh": false,
|
|
|
"settable_per_extruder": true
|
|
|
},
|
|
|
- "jerk_support_roof": {
|
|
|
- "label": "Support Roof Jerk",
|
|
|
- "description": "The maximum instantaneous velocity change with which the roofs of support are printed.",
|
|
|
+ "jerk_support_interface": {
|
|
|
+ "label": "Support Interface Jerk",
|
|
|
+ "description": "The maximum instantaneous velocity change with which the roofs and bottoms of support are printed.",
|
|
|
"unit": "mm/s",
|
|
|
"type": "float",
|
|
|
"default_value": 20,
|
|
|
@@ -1923,7 +1923,7 @@
|
|
|
"minimum_value": "0.1",
|
|
|
"minimum_value_warning": "5",
|
|
|
"maximum_value_warning": "50",
|
|
|
- "enabled": "jerk_enabled and support_roof_enable and support_enable",
|
|
|
+ "enabled": "jerk_enabled and support_interface_enable and support_enable",
|
|
|
"settable_per_mesh": false,
|
|
|
"settable_per_extruder": true
|
|
|
}
|
|
|
@@ -2437,62 +2437,94 @@
|
|
|
"enabled": "support_enable",
|
|
|
"settable_per_mesh": true
|
|
|
},
|
|
|
- "support_roof_enable":
|
|
|
+ "support_interface_enable":
|
|
|
{
|
|
|
- "label": "Enable Support Roof",
|
|
|
- "description": "Generate a dense top skin at the top of the support on which the model is printed.",
|
|
|
+ "label": "Enable Support Interface",
|
|
|
+ "description": "Generate a dense interface between the model and the support. This will create a skin at the top of the support on which the model is printed and at the bottom of the support, where it rests on the model.",
|
|
|
"type": "bool",
|
|
|
"default_value": false,
|
|
|
"global_inherits_stack": "support_extruder_nr",
|
|
|
"enabled": "support_enable",
|
|
|
"settable_per_mesh": true
|
|
|
},
|
|
|
- "support_roof_height":
|
|
|
+ "support_interface_height":
|
|
|
{
|
|
|
- "label": "Support Roof Thickness",
|
|
|
- "description": "The thickness of the support roofs.",
|
|
|
+ "label": "Support Interface Thickness",
|
|
|
+ "description": "The thickness of the interface of the support where it touches with the model on the bottom or the top.",
|
|
|
"unit": "mm",
|
|
|
"type": "float",
|
|
|
"default_value": 1,
|
|
|
"minimum_value": "0",
|
|
|
"global_inherits_stack": "support_extruder_nr",
|
|
|
"maximum_value_warning": "10",
|
|
|
- "enabled": "support_roof_enable and support_enable",
|
|
|
- "settable_per_mesh": true
|
|
|
+ "enabled": "support_interface_enable and support_enable",
|
|
|
+ "settable_per_mesh": true,
|
|
|
+ "children":
|
|
|
+ {
|
|
|
+ "support_roof_height":
|
|
|
+ {
|
|
|
+ "label": "Support Roof Thickness",
|
|
|
+ "description": "The thickness of the support roofs. This controls the amount of dense layers at the top of the support on which the model rests.",
|
|
|
+ "unit": "mm",
|
|
|
+ "type": "float",
|
|
|
+ "default_value": 1,
|
|
|
+ "value": "support_interface_height",
|
|
|
+ "minimum_value": "0",
|
|
|
+ "global_inherits_stack": "support_extruder_nr",
|
|
|
+ "maximum_value_warning": "10",
|
|
|
+ "enabled": "support_interface_enable and support_enable",
|
|
|
+ "settable_per_mesh": true
|
|
|
+ },
|
|
|
+ "support_bottom_height":
|
|
|
+ {
|
|
|
+ "label": "Support Bottom Thickness",
|
|
|
+ "description": "The thickness of the support bottoms. This controls the number of dense layers are printed on top of places of a model on which support rests.",
|
|
|
+ "unit": "mm",
|
|
|
+ "type": "float",
|
|
|
+ "default_value": 1,
|
|
|
+ "value": "support_interface_height",
|
|
|
+ "minimum_value": "0",
|
|
|
+ "minimum_value_warning": "support_bottom_stair_step_height",
|
|
|
+ "global_inherits_stack": "support_extruder_nr",
|
|
|
+ "maximum_value_warning": "10",
|
|
|
+ "enabled": "support_interface_enable and support_enable",
|
|
|
+ "settable_per_mesh": true
|
|
|
+ }
|
|
|
+ }
|
|
|
},
|
|
|
- "support_roof_density":
|
|
|
+ "support_interface_density":
|
|
|
{
|
|
|
- "label": "Support Roof Density",
|
|
|
- "description": "Adjusts the density of the roof of the support structure. A higher value results in better overhangs, but the supports are harder to remove.",
|
|
|
+ "label": "Support Interface Density",
|
|
|
+ "description": "Adjusts the density of the roofs and bottoms of the support structure. A higher value results in better overhangs, but the supports are harder to remove.",
|
|
|
"unit": "%",
|
|
|
"type": "float",
|
|
|
"default_value": 100,
|
|
|
"minimum_value": "0",
|
|
|
"maximum_value_warning": "100",
|
|
|
- "enabled":"support_roof_enable and support_enable",
|
|
|
+ "enabled":"support_interface_enable and support_enable",
|
|
|
"settable_per_mesh": false,
|
|
|
"settable_per_extruder": true,
|
|
|
"children":
|
|
|
{
|
|
|
- "support_roof_line_distance":
|
|
|
+ "support_interface_line_distance":
|
|
|
{
|
|
|
- "label": "Support Roof Line Distance",
|
|
|
- "description": "Distance between the printed support roof lines. This setting is calculated by the support roof Density, but can be adjusted separately.",
|
|
|
+ "label": "Support Interface Line Distance",
|
|
|
+ "description": "Distance between the printed support interface lines. This setting is calculated by the Support Interface Density, but can be adjusted separately.",
|
|
|
"unit": "mm",
|
|
|
"type": "float",
|
|
|
"default_value": 0.4,
|
|
|
"minimum_value": "0",
|
|
|
- "value": "0 if support_roof_density == 0 else (support_roof_line_width * 100) / support_roof_density * (2 if support_roof_pattern == \"grid\" else (3 if support_roof_pattern == \"triangles\" else 1))",
|
|
|
- "enabled": "support_roof_enable and support_enable",
|
|
|
+ "value": "0 if support_interface_density == 0 else (support_interface_line_width * 100) / support_interface_density * (2 if support_interface_pattern == \"grid\" else (3 if support_interface_pattern == \"triangles\" else 1))",
|
|
|
+ "enabled": "support_interface_enable and support_enable",
|
|
|
"settable_per_mesh": false,
|
|
|
"settable_per_extruder": true
|
|
|
}
|
|
|
}
|
|
|
},
|
|
|
- "support_roof_pattern":
|
|
|
+ "support_interface_pattern":
|
|
|
{
|
|
|
- "label": "Support Roof Pattern",
|
|
|
- "description": "The pattern with which the top of the support is printed.",
|
|
|
+ "label": "Support Interface Pattern",
|
|
|
+ "description": "The pattern with which the interface of the support with the model is printed.",
|
|
|
"type": "enum",
|
|
|
"options":
|
|
|
{
|
|
|
@@ -2503,7 +2535,7 @@
|
|
|
"zigzag": "Zig Zag"
|
|
|
},
|
|
|
"default_value": "concentric",
|
|
|
- "enabled": "support_roof_enable and support_enable",
|
|
|
+ "enabled": "support_interface_enable and support_enable",
|
|
|
"settable_per_mesh": false,
|
|
|
"settable_per_extruder": true
|
|
|
},
|
|
|
@@ -3138,14 +3170,14 @@
|
|
|
"settable_per_mesh": false,
|
|
|
"settable_per_extruder": false
|
|
|
},
|
|
|
- "support_roof_extruder_nr":
|
|
|
+ "support_interface_extruder_nr":
|
|
|
{
|
|
|
- "label": "Support Roof Extruder",
|
|
|
- "description": "The extruder train to use for printing the roof of the support. This is used in multi-extrusion.",
|
|
|
+ "label": "Support Interface Extruder",
|
|
|
+ "description": "The extruder train to use for printing the roofs and bottoms of the support. This is used in multi-extrusion.",
|
|
|
"type": "extruder",
|
|
|
"default_value": "0",
|
|
|
"value": "support_extruder_nr",
|
|
|
- "enabled": "support_enable and support_roof_enable",
|
|
|
+ "enabled": "support_enable and support_interface_enable",
|
|
|
"settable_per_mesh": false,
|
|
|
"settable_per_extruder": false
|
|
|
}
|
fieldOfView