Set line widths equal to nozzle diameter

and remove line width lines from profiles (PP-13)

resources/definitions/ultimaker2_plus.def.json

@@ -35,7 +35,7 @@
             "value": "round(machine_nozzle_size / 1.5, 2)"
         },
         "line_width": {
-            "value": "round(machine_nozzle_size * 0.875, 2)"
+            "value": "machine_nozzle_size"
         },
         "speed_support": {
             "value": "speed_wall_0"

resources/definitions/ultimaker2_plus_connect.def.json

@@ -59,7 +59,7 @@
         "speed_infill": { "value": "speed_print" },
         "speed_wall_x": { "value": "speed_wall" },
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
-        "line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" },
+        "line_width": { "value": "machine_nozzle_size" },
         "optimize_wall_printing_order": { "value": "True" },
         "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" },
         "speed_support": { "value": "speed_wall_0" },

resources/definitions/ultimaker3.def.json

@@ -97,7 +97,7 @@
         "cool_fan_speed_max": { "value": "100" },
         "cool_min_speed": { "value": "5" },
         "infill_before_walls": { "value": "False" },
-        "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" },
+        "infill_line_width": { "value": "line_width" },
         "infill_overlap": { "value": "0" },
         "infill_pattern": { "value": "'triangles'" },
         "infill_wipe_dist": { "value": "0" },
@@ -114,7 +114,7 @@
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
         "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
-        "line_width": { "value": "round(machine_nozzle_size * 0.875, 3)" },
+        "line_width": { "value": "machine_nozzle_size" },
         "machine_min_cool_heat_time_window": { "value": "15" },
         "default_material_print_temperature": { "value": "200" },
         "material_print_temperature_layer_0": { "value": "material_print_temperature + 5" },
@@ -165,7 +165,7 @@
         "top_bottom_thickness": { "value": "1" },
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
         "wall_0_inset": { "value": "0" },
-        "wall_line_width_x": { "value": "round(wall_line_width * 0.3 / 0.35, 2)" },
+        "wall_line_width_x": { "value": "wall_line_width" },
         "wall_thickness": { "value": "1" },
         "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" }
     }

resources/definitions/ultimaker_s3.def.json

@@ -106,7 +106,7 @@
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
         "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
-        "line_width": { "value": "machine_nozzle_size * 0.875" },
+        "line_width": { "value": "machine_nozzle_size" },
         "machine_min_cool_heat_time_window": { "value": "15" },
         "default_material_print_temperature": { "value": "200" },
         "material_standby_temperature": { "value": "100" },

resources/definitions/ultimaker_s5.def.json

@@ -92,7 +92,7 @@
         "cool_fan_speed_max": { "value": "100" },
         "cool_min_speed": { "value": "5" },
         "infill_before_walls": { "value": "False" },
-        "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" },
+        "infill_line_width": { "value": "line_width" },
         "infill_overlap": { "value": "0" },
         "infill_pattern": { "value": "'triangles'" },
         "infill_wipe_dist": { "value": "0" },
@@ -108,7 +108,7 @@
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
         "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
-        "line_width": { "value": "machine_nozzle_size * 0.875" },
+        "line_width": { "value": "machine_nozzle_size" },
         "machine_min_cool_heat_time_window": { "value": "15" },
         "default_material_print_temperature": { "value": "200" },
         "material_standby_temperature": { "value": "100" },
@@ -158,7 +158,7 @@
         "travel_avoid_supports": { "value": "True" },
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
         "wall_0_inset": { "value": "0" },
-        "wall_line_width_x": { "value": "round(line_width * 0.3 / 0.35, 2)" },
+        "wall_line_width_x": { "value": "line_width" },
         "wall_thickness": { "value": "1" },
         "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" },
         "meshfix_maximum_deviation": { "value": "layer_height / 4" },

resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg

@@ -21,7 +21,7 @@ speed_layer_0 = 20
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
 infill_sparse_density = 15
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -29,5 +29,5 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
-wall_line_width_x = =line_width
+
+

resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_abs
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,6 +29,6 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2

resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_abs
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,6 +29,6 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2

resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 

resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2