HMS434 update

support settings
toolchange settings

resources/definitions/hms434.def.json

@@ -164,7 +164,8 @@
         "support_interface_pattern": {"value": "'lines'"},
         "support_roof_pattern":      {"value": "'concentric'"},
         "support_interface_enable":  {"value": true},
-        "support_interface_height":  {"value": 0.5},
+        "support_interface_height":  {"value": "layer_height * 3"},
+        "support_bottom_height":     {"value": "layer_height"},
 
         "adhesion_type":             {"value": "'skirt'"},
         "skirt_gap":                 {"value": 1},

resources/extruders/hms434_tool_1.def.json

@@ -16,7 +16,7 @@
         "machine_nozzle_offset_y": { "default_value": 0.0 },
         "material_diameter": { "default_value": 1.75 },
         "machine_extruder_start_code": {
-          "default_value": "\n;changing to tool1\nM83\nM109 T0 S{material_print_temperature}\nG1 E{switch_extruder_extra_prime_amount} F480\nG1 E{switch_extruder_extra_prime_amount} F480\nG1 E{switch_extruder_extra_prime_amount} F480\nG1 E{switch_extruder_extra_prime_amount} F480\nG1 Y120 F3000\nG1 X10 F12000\nG1 E-{switch_extruder_retraction_amount} F2400\n\n"
+          "default_value": "\n;changing to tool1\nM83\nM109 T0 S{material_print_temperature}\nG1 E{switch_extruder_extra_prime_amount} F360\nG1 E{switch_extruder_extra_prime_amount} F360\nG1 E{switch_extruder_extra_prime_amount} F360\nG1 E{switch_extruder_extra_prime_amount} F360\nG1 Y120 F3000\nG1 X10 F12000\nG1 E-{switch_extruder_retraction_amount} F2400\n\n"
         },
         "machine_extruder_end_code": {
            "default_value": "\nG1 X10 Y120 F12000\nG1 X-40 F12000\nM109 T0 R{material_standby_temperature}\nG1 Y100 F3000\n; ending tool1\n\n"

resources/extruders/hms434_tool_2.def.json

@@ -16,7 +16,7 @@
         "machine_nozzle_offset_y": { "default_value": 0.0 },
         "material_diameter": { "default_value": 1.75 },
         "machine_extruder_start_code": {
-          "default_value": "\n;changing to tool2\nM83\nM109 T1 S{material_print_temperature}\nG1 E{switch_extruder_extra_prime_amount} F480\nG1 E{switch_extruder_extra_prime_amount} F480\nG1 E{switch_extruder_extra_prime_amount} F480\nG1 E{switch_extruder_extra_prime_amount} F480\nG1 Y120 F3000\nG1 X10 F12000\nG1 E-{switch_extruder_retraction_amount} F2400\n\n"
+          "default_value": "\n;changing to tool2\nM83\nM109 T1 S{material_print_temperature}\nG1 E{switch_extruder_extra_prime_amount} F360\nG1 E{switch_extruder_extra_prime_amount} F360\nG1 E{switch_extruder_extra_prime_amount} F360\nG1 E{switch_extruder_extra_prime_amount} F360\nG1 Y120 F3000\nG1 X10 F12000\nG1 E-{switch_extruder_retraction_amount} F2400\n\n"
         },
         "machine_extruder_end_code": {
            "default_value": "\nG1 X10 Y120 F12000\nG1 X-40 F12000\nM109 T1 R{material_standby_temperature}\nG1 Y100 F3000\n; ending tool2\n\n"