Add acceleration/jerk data for TEVO Tarantula

Thanks to @SuperBoppy in ticket #3323.

resources/definitions/tevo_tarantula.def.json

@@ -2,7 +2,8 @@
     "version": 2,
     "name": "Tevo Tarantula",
     "inherits": "fdmprinter",
-    "metadata": {
+    "metadata":
+    {
         "visible": true,
         "author": "TheAssassin",
         "manufacturer": "Tevo",
@@ -11,62 +12,39 @@
         "platform": "prusai3_platform.stl"
     },
 
-    "overrides": {
-        "machine_name": {
-            "default_value": "Tevo Tarantula"
-        },
-        "machine_heated_bed": {
-            "default_value": true
-        },
-        "machine_width": {
-            "default_value": 200
-        },
-        "machine_height": {
-            "default_value": 200
-        },
-        "machine_depth": {
-            "default_value": 200
-        },
-        "machine_center_is_zero": {
-            "default_value": false
-        },
-        "machine_nozzle_size": {
-            "default_value": 0.4
-        },
-        "material_diameter": {
-            "default_value": 1.75
-        },
-        "machine_head_polygon": {
-            "default_value": [
+    "overrides":
+    {
+        "machine_name": { "default_value": "Tevo Tarantula" },
+        "machine_heated_bed": { "default_value": true },
+        "machine_width": { "default_value": 200 },
+        "machine_height": { "default_value": 200 },
+        "machine_depth": { "default_value": 200 },
+        "machine_center_is_zero": { "default_value": false },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_head_polygon":
+        {
+            "default_value":
+            [
                 [-75, -18],
                 [-75, 35],
                 [18, 35],
                 [18, -18]
             ]
         },
-        "gantry_height": {
-            "default_value": 55
-        },
-        "machine_gcode_flavor": {
-            "default_value": "RepRap (Marlin/Sprinter)"
-        },
-        "machine_acceleration": {
-            "default_value": 500
-        },
-        "machine_max_jerk_xy": {
-            "default_value": 4.0
-        },
-        "machine_max_jerk_z": {
-            "default_value": 0.2
-        },
-        "machine_max_jerk_e": {
-            "default_value": 2.5
-        },
-        "machine_start_gcode": {
-            "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
-        },
-        "machine_end_gcode": {
-            "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG1 X0 Y200 F3600 ;move extruder out of the way by moving the baseplate to the front for easier access to printed object\nM84 ;steppers off"
-        }
+        "gantry_height": { "default_value": 55 },
+        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
+        "machine_acceleration": { "default_value": 2650 },
+        "machine_max_jerk_xy": { "default_value": 15.0 },
+        "machine_max_jerk_z": { "default_value": 0.4 },
+        "machine_max_jerk_e": { "default_value": 5 },
+        "machine_max_feedrate_x": { "default_value": 255 },
+        "machine_max_feedrate_y": { "default_value": 225 },
+        "machine_max_feedrate_z": { "default_value": 3 },
+        "machine_max_acceleration_x": { "default_value": 2620 },
+        "machine_max_acceleration_y": { "default_value": 2650 },
+        "acceleration_print": { "default_value": 2650 },
+        "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
+        "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG1 X0 Y200 F3600 ;move extruder out of the way by moving the baseplate to the front for easier access to printed object\nM84 ;steppers off" }
     }
 }