Update TPU Print setting

resources/quality/twotrees/tpu/two_trees_0.3_TPU_adaptive.inst.cfg

@@ -12,14 +12,14 @@ variant = 0.3mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.2
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7

resources/quality/twotrees/tpu/two_trees_0.3_TPU_standard.inst.cfg

@@ -12,14 +12,14 @@ variant = 0.3mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.4
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7

resources/quality/twotrees/tpu/two_trees_0.3_TPU_super.inst.cfg

@@ -12,14 +12,14 @@ variant = 0.3mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.2
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7

resources/quality/twotrees/tpu/two_trees_0.4_TPU_adaptive.inst.cfg

@@ -12,14 +12,14 @@ variant = 0.4mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.2
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7

resources/quality/twotrees/tpu/two_trees_0.4_TPU_standard.inst.cfg

@@ -12,14 +12,14 @@ variant = 0.4mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.3
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7

resources/quality/twotrees/tpu/two_trees_0.4_TPU_super.inst.cfg

@@ -12,14 +12,14 @@ variant = 0.4mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.2
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7

resources/quality/twotrees/tpu/two_trees_0.5_TPU_adaptive.inst.cfg

@@ -12,14 +12,14 @@ variant = 0.5mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.2
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7

resources/quality/twotrees/tpu/two_trees_0.5_TPU_standard.inst.cfg

@@ -12,14 +12,14 @@ variant = 0.5mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.3
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7

resources/quality/twotrees/tpu/two_trees_0.5_TPU_super.inst.cfg

@@ -12,14 +12,14 @@ variant = 0.5mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.2
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7

resources/quality/twotrees/tpu/two_trees_0.6_TPU_standard.inst.cfg

@@ -12,14 +12,14 @@ variant = 0.6mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.3
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7