TPU temperatures update

Removal of all final and initial print temperature offsets, and huge increase in first layer print temperature. These changes should greatly improve first layer extrusion.

resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg

@@ -31,11 +31,11 @@ line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature - 21
+material_final_print_temperature = =material_print_temperature
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature - 16
+material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2
-material_print_temperature_layer_0 = =default_material_print_temperature + 2
+material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True

resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg

@@ -31,11 +31,11 @@ line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature - 21
+material_final_print_temperature = =material_print_temperature
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature - 16
+material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2
-material_print_temperature_layer_0 = =default_material_print_temperature + 2
+material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True

resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg

@@ -30,10 +30,10 @@ line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature - 21
+material_final_print_temperature = =material_print_temperature
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature - 16
-material_print_temperature_layer_0 = =default_material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature + 17
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True

resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg

@@ -25,11 +25,11 @@ jerk_support = =math.ceil(jerk_print * 25 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature - 21
+material_final_print_temperature = =material_print_temperature
 material_flow = 105
-material_initial_print_temperature = =material_print_temperature - 16
+material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature - 2
-material_print_temperature_layer_0 = =material_print_temperature + 4
+material_print_temperature_layer_0 = =material_print_temperature + 19
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True

resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg

@@ -26,11 +26,11 @@ jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 layer_height = 0.4
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature - 21
+material_final_print_temperature = =material_print_temperature
 material_flow = 105
-material_initial_print_temperature = =material_print_temperature - 16
+material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2
-material_print_temperature_layer_0 = =material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature +15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True

resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg

@@ -26,10 +26,10 @@ jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 layer_height = 0.3
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature - 21
+material_final_print_temperature = =material_print_temperature
 material_flow = 105
-material_initial_print_temperature = =material_print_temperature - 16
-material_print_temperature_layer_0 = =material_print_temperature + 2
+material_initial_print_temperature = =material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature + 17
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True

resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg

@@ -30,11 +30,11 @@ line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature - 21
+material_final_print_temperature = =material_print_temperature
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature - 16
+material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2
-material_print_temperature_layer_0 = =default_material_print_temperature + 2
+material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True

resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg

@@ -30,11 +30,11 @@ line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature - 21
+material_final_print_temperature = =material_print_temperature
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature - 16
+material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2
-material_print_temperature_layer_0 = =default_material_print_temperature + 2
+material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True

resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg

@@ -30,10 +30,10 @@ line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature - 21
+material_final_print_temperature = =material_print_temperature
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature - 16
-material_print_temperature_layer_0 = =default_material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature + 17
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True

resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg

@@ -23,11 +23,11 @@ jerk_support = =math.ceil(jerk_print * 25 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature - 21
+material_final_print_temperature = =material_print_temperature
 material_flow = 105
-material_initial_print_temperature = =material_print_temperature - 16
+material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature - 2
-material_print_temperature_layer_0 = =material_print_temperature + 4
+material_print_temperature_layer_0 = =material_print_temperature + 19
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True