Fix source typos

plugins/PostProcessingPlugin/scripts/ChangeAtZ.py

@@ -1367,11 +1367,11 @@ class ChangeAtZProcessor:
         # handle extruder temp changes
         if command.command == "M104" or command.command == "M109":
 
-            # get our tempurature
-            tempurature = command.getArgumentAsFloat("S")
+            # get our temperature
+            temperature = command.getArgumentAsFloat("S")
 
-            # don't bother if we don't have a tempurature
-            if tempurature is None:
+            # don't bother if we don't have a temperature
+            if temperature is None:
                 return
 
             # get our extruder, default to extruder one
@@ -1379,10 +1379,10 @@ class ChangeAtZProcessor:
 
             # set our extruder temp based on the extruder
             if extruder is None or extruder == 0:
-                self.lastValues["extruderOne"] = tempurature
+                self.lastValues["extruderOne"] = temperature
 
             if extruder is None or extruder == 1:
-                self.lastValues["extruderTwo"] = tempurature
+                self.lastValues["extruderTwo"] = temperature
 
             # move to the next command
             return
@@ -1401,10 +1401,10 @@ class ChangeAtZProcessor:
         if command.command == "M221":
 
             # get our flow rate
-            tempurature = command.getArgumentAsFloat("S")
+            temperature = command.getArgumentAsFloat("S")
 
             # don't bother if we don't have a flow rate (for some reason)
-            if tempurature is None:
+            if temperature is None:
                 return
 
             # get our extruder, default to global
@@ -1412,11 +1412,11 @@ class ChangeAtZProcessor:
 
             # set our extruder temp based on the extruder
             if extruder is None:
-                self.lastValues["flowrate"] = tempurature
+                self.lastValues["flowrate"] = temperature
             elif extruder == 1:
-                self.lastValues["flowrateOne"] = tempurature
+                self.lastValues["flowrateOne"] = temperature
             elif extruder == 1:
-                self.lastValues["flowrateTwo"] = tempurature
+                self.lastValues["flowrateTwo"] = temperature
 
             # move to the next command
             return

plugins/SimulationView/LayerSlider.qml

@@ -300,7 +300,7 @@ Item
             // don't allow the upper handle to be lower than the lower handle
             if (y - (upperHandle.y + upperHandle.height) < sliderRoot.minimumRangeHandleSize)
             {
-                upperHandle.y = y - (upperHandle.heigth + sliderRoot.minimumRangeHandleSize)
+                upperHandle.y = y - (upperHandle.height + sliderRoot.minimumRangeHandleSize)
             }
 
             // update the range handle

resources/definitions/two_trees_base.def.json

@@ -26,7 +26,7 @@
     "overrides": {
         "machine_name": { "default_value": "Two Trees Base Printer" },
         "machine_start_gcode": { "default_value": "G28 ;Home\nM420 S1 ;Enable ABL using saved Mesh and Fade Height\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move bed down\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Bed up" },
-        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
      
         "machine_heated_bed": { "default_value": true },
 

resources/quality/uni_base/layer_0.20.inst.cfg

@@ -1,6 +1,6 @@
 [general]
 version = 4
-name = Standart Quality
+name = Standard Quality
 definition = uni_base
 
 [metadata]

resources/quality/uni_base/layer_0.25.inst.cfg

@@ -1,6 +1,6 @@
 [general]
 version = 4
-name = Fast Standart Quality
+name = Fast Standard Quality
 definition = uni_base
 
 [metadata]

resources/quality/zav_base/zav_layer_0.20.inst.cfg

@@ -1,6 +1,6 @@
 [general]
 version = 4
-name = Standart Quality
+name = Standard Quality
 definition = zav_base
 
 [metadata]

resources/quality/zav_base/zav_layer_0.25.inst.cfg

@@ -1,6 +1,6 @@
 [general]
 version = 4
-name = Fast Standart Quality
+name = Fast Standard Quality
 definition = zav_base
 
 [metadata]

tests/Settings/TestSettingVisibilityPresets.py

@@ -19,7 +19,7 @@ def test_createVisibilityPresetFromLocalFile():
     # of the other profiles, since they might change over time.
     visibility_preset = SettingVisibilityPreset()
 
-    visibility_preset.loadFromFile(os.path.join(os.path.dirname(os.path.abspath(__file__)), "setting_visiblity_preset_test.cfg"))
+    visibility_preset.loadFromFile(os.path.join(os.path.dirname(os.path.abspath(__file__)), "setting_visibility_preset_test.cfg"))
     assert setting_visibility_preset_test_settings == set(visibility_preset.settings)
 
     assert visibility_preset.name == "test"