Adding_ASA-X_profiles

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ASA-X_A.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 10
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_asax
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 35/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/35)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 20/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 40
+cool_fan_speed_max = 75
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 19 * layer_height
+cool_min_speed = 10
+support_angle = 65
+material_print_temperature = =default_material_print_temperature + 1
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 100
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ASA-X_B.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 10
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_asax
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 55
+speed_wall = =math.ceil(speed_print * 37/55)
+speed_wall_0 = =math.ceil(speed_wall * 33/37)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = =math.ceil(speed_print * 25/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 40
+cool_fan_speed_max = 75
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_flow = 96
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ASA-X_C.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 10
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_asax
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 60
+speed_wall = =math.ceil(speed_print * 40/60)
+speed_wall_0 = =math.ceil(speed_wall * 35/40)
+speed_topbottom = =math.ceil(speed_print * 40/60)
+speed_layer_0 = =math.ceil(speed_print * 30/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 40
+cool_fan_speed_max = 75
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 7
+material_flow = 91
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_B.inst.cfg

@@ -25,22 +25,22 @@ speed_layer_0 = =math.ceil(speed_print * 25/50)
 speed_slowdown_layers = 2
 cool_fan_enabled = True
 cool_fan_speed = 40
-cool_fan_speed_max = 100
+cool_fan_speed_max = 75
 cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
-cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
 cool_min_speed = 10
 support_angle = 60
-material_print_temperature = =default_material_print_temperature + 2
-material_print_temperature_layer_0 = =default_material_print_temperature
-material_flow = 93
-retraction_extra_prime_amount = 0.1
+material_print_temperature = =default_material_print_temperature + 1
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 101
+retraction_extra_prime_amount = 0.2
 retraction_min_travel = =3*line_width
 retraction_hop_only_when_collides = True
 skin_overlap = 5
 support_z_distance = =layer_height
 support_bottom_distance = =support_z_distance
-support_xy_distance = =line_width * 1.7
+support_xy_distance = =line_width * 1.5
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100

resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_C.inst.cfg

@@ -21,20 +21,20 @@ speed_print = 55
 speed_wall = =math.ceil(speed_print * 40/55)
 speed_wall_0 = =math.ceil(speed_wall * 33/40)
 speed_topbottom = =math.ceil(speed_print * 37/55)
-speed_layer_0 = =math.ceil(speed_print * 27/55)
+speed_layer_0 = =math.ceil(speed_print * 25/55)
 speed_slowdown_layers = 2
 cool_fan_enabled = True
 cool_fan_speed = 40
-cool_fan_speed_max = 100
+cool_fan_speed_max = 75
 cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
-cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
 cool_min_speed = 10
 support_angle = 55
-material_print_temperature = =default_material_print_temperature + 5
-material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_flow = 93
-retraction_extra_prime_amount = 0.1
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_flow = 99
+retraction_extra_prime_amount = 0.2
 retraction_min_travel = =3*line_width
 retraction_hop_only_when_collides = True
 skin_overlap = 5

resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_D.inst.cfg

@@ -6,7 +6,7 @@ definition = strateo3d
 [metadata]
 setting_version = 10
 type = quality
-quality_type = d
+quality_type = d 
 weight = -1
 material = emotiontech_asax
 variant = Standard 0.6
@@ -21,20 +21,20 @@ speed_print = 60
 speed_wall = =math.ceil(speed_print * 43/60)
 speed_wall_0 = =math.ceil(speed_wall * 35/45)
 speed_topbottom = =math.ceil(speed_print * 40/60)
-speed_layer_0 = =math.ceil(speed_print * 30/60)
+speed_layer_0 = =math.ceil(speed_print * 25/60)
 speed_slowdown_layers = 2
 cool_fan_enabled = True
 cool_fan_speed = 40
-cool_fan_speed_max = 100
+cool_fan_speed_max = 75
 cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
-cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
 cool_min_speed = 10
 support_angle = 50
-material_print_temperature = =default_material_print_temperature + 8
-material_print_temperature_layer_0 = =default_material_print_temperature + 5
-material_flow = 93
-retraction_extra_prime_amount = 0.1
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 7
+material_flow = 97
+retraction_extra_prime_amount = 0.2
 retraction_min_travel = =3*line_width
 retraction_hop_only_when_collides = True
 skin_overlap = 5

resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ASA-X_C.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 10
+type = quality
+quality_type = c
+weight = 1
+material = emotiontech_asax
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 33/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 40
+cool_fan_speed_max = 75
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 1
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 97
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =layer_height
+support_xy_distance = =line_width * 1.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ASA-X_D.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 10
+type = quality
+quality_type = d
+weight = 0
+material = emotiontech_asax
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 33/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 40
+cool_fan_speed_max = 75
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_flow = 96
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =layer_height
+support_xy_distance = =line_width * 1.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ASA-X_E.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = E
+definition = strateo3d
+
+[metadata]
+setting_version = 10
+type = quality
+quality_type = e
+weight = -1
+material = emotiontech_asax
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 33/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 40
+cool_fan_speed_max = 75
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 7
+material_flow = 95
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =layer_height
+support_xy_distance = =line_width * 1.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True