|
|
@@ -0,0 +1,59 @@
|
|
|
+{
|
|
|
+ "version": 2,
|
|
|
+ "name": "Felix Tec 4 Dual",
|
|
|
+ "inherits": "fdmprinter",
|
|
|
+ "metadata": {
|
|
|
+ "visible": true,
|
|
|
+ "author": "kerog777@gmail.com",
|
|
|
+ "manufacturer": "Felix",
|
|
|
+ "platform": "FelixTec4_platform.stl",
|
|
|
+ "platform_offset": [-128,0, 102],
|
|
|
+ "machine_extruder_trains":
|
|
|
+ {
|
|
|
+ "0": "felixtec4_dual_extruder_0",
|
|
|
+ "1": "felixtec4_dual_extruder_1"
|
|
|
+ },
|
|
|
+ "file_formats": "text/x-gcode",
|
|
|
+ "has_variants": true,
|
|
|
+ "has_materials": true,
|
|
|
+ "preferred_variant_name": "0.35 mm",
|
|
|
+ "variants_name": "Nozzle Diam"
|
|
|
+ },
|
|
|
+ "overrides": {
|
|
|
+ "machine_name": { "default_value": "FelixTec4Dual" },
|
|
|
+
|
|
|
+ "layer_height": { "default_value": 0.2 },
|
|
|
+ "layer_height_0": { "default_value": 0.3 },
|
|
|
+ "infill_sparse_density": { "default_value": 20 },
|
|
|
+ "wall_thickness": { "default_value": 1 },
|
|
|
+ "top_bottom_thickness": { "default_value": 1 },
|
|
|
+
|
|
|
+ "infill_pattern": { "value": "'tetrahedral'" },
|
|
|
+
|
|
|
+ "machine_width": { "default_value": 255 },
|
|
|
+ "machine_depth": { "default_value": 205 },
|
|
|
+ "machine_height": { "default_value": 225 },
|
|
|
+
|
|
|
+ "machine_heated_bed": { "default_value": true },
|
|
|
+ "machine_gcode_flavor": { "default_value": "Repetier" },
|
|
|
+ "machine_center_is_zero": { "default_value": false },
|
|
|
+
|
|
|
+ "speed_print": { "default_value": 60 },
|
|
|
+ "speed_travel": { "default_value": 200 },
|
|
|
+
|
|
|
+ "retraction_amount": { "default_value": 1 },
|
|
|
+ "retraction_speed": { "default_value": 50},
|
|
|
+ "material_flow": { "default_value": 87 },
|
|
|
+ "machine_nozzle_size": { "default_value": 0.35 },
|
|
|
+ "adhesion_type": { "default_value": "skirt" },
|
|
|
+ "skirt_brim_minimal_length": { "default_value": 130},
|
|
|
+
|
|
|
+ "material_diameter": { "default_value": 1.75 },
|
|
|
+ "machine_start_gcode": {
|
|
|
+ "default_value": "; FELIXprinters | www.FELIXprinters.com | Zeemanlaan 15 3401 MV IJsselstein The Netherlands\n; FELIX Tec 4 | Start Code Dual Extruders v1.0\n; Modified by kerog777@gmail.com\n;================================ \n;Initializing\nM80 ; Turn on the power supply\nM107 ; Turn off fans\nM117 Heating up\nM104 T0 S120\nM104 T1 S120\nM140 S{print_bed_temperature} ; Heatup Bed and continue\nG28 ; Home all\nM109 T0 S{print_temperature} ; Heatup hot-end and continue\nM117 Purging\nT0 ; Select extruder 1\nG92 E0 ; Reset extruder\nG1 X10.0 Y1.1 Z5.0 F15240 ; Move to start-line position\nG1 Z0.3 F15240 ; Move z up\nG1 X127.0 Y1.1 Z0.3 F1500.0 E15 ; Purge 1st line\nG92 E0 ; Reset extruder\n\n;================================ ; Initializing done\nM117 FELIXprinting"
|
|
|
+ },
|
|
|
+ "machine_end_gcode": {
|
|
|
+ "default_value": "; FELIXprinters End Code Tec Series v1.0\n; Modified by kerog777@gmail.com\n; ================================= \n; Move extruder to park position\nG91 ; Make coordinates relative\nG1 Z2 F1000 ; Move z 2mm up\nG90 ; Use absolute coordinates again\n G1 X0 Y0 F15240 ; Move bed and printhead to ergonomic position\n\n; ================================= ; Turn off heaters\nM140 S0 ; Turn off bed heater\nT0 ; Select left extruder\nM104 T0 S0 ; Turn off heater and continue\n G92 E0 ; Reset extruder position\nG1 E-6 ; Retract filament 8mm\nG92 E0 ; Reset extruder position\nT1 ; Select right extruder\nM104 T1 S0 ; Turn off heater and continue\nG92 E0 ; Reset extruder position\nG1 E-6 ; Retract filament 8mm\nG92 E0 ; Reset extruder position\nT0 ; Select left extruder\n\n; ================================= ; Turn the rest off\nM107 ; Turn off fan\nM84 ; Disable steppers\nM117 Finished Printing!"
|
|
|
+ }
|
|
|
+ }
|
|
|
+}
|
Lipu Fei