Copy 0.8mm variants of UM3 to UM3E

They share the same profiles. They should also have the same settings in the variants, but this is not automatically shared for some reason.

Contributes to issue CURA-3650.

resources/variants/ultimaker3_extended_aa0.8.inst.cfg

@@ -10,15 +10,15 @@ type = variant
 [values]
 acceleration_enabled = True
 acceleration_print = 4000
-brim_line_count = 7
 brim_width = 7
-cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
-cool_fan_speed = 100
+cool_fan_speed = 7
 cool_fan_speed_max = 100
+cool_min_speed = 5
 default_material_print_temperature = 200
 infill_before_walls = False
+infill_line_width = =round(line_width * 0.6 / 0.7, 2)
 infill_overlap = 0
-infill_pattern = cubic
+infill_pattern = triangles
 infill_wipe_dist = 0
 jerk_enabled = True
 jerk_print = 25
@@ -26,17 +26,20 @@ jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
 jerk_wall = =math.ceil(jerk_print * 25 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
 layer_height = 0.2
+line_width = =machine_nozzle_size
 machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_size = 0.8
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
-ooze_shield_angle = 40
-raft_acceleration = =acceleration_layer_0
-raft_margin = 10
+prime_tower_enable = False
+prime_tower_size = 16
+prime_tower_wipe_enabled = True
 retract_at_layer_change = True
+retraction_amount = 6.5
 retraction_count_max = 25
 retraction_extrusion_window = 1
 retraction_hop = 2
@@ -48,17 +51,14 @@ speed_layer_0 = 20
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 25 / 35)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
-support_angle = 70
+support_angle = 60
 support_bottom_distance = =support_z_distance / 2
-support_line_width = =line_width * 0.75
+support_pattern = zigzag
 support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 1.5
 support_z_distance = =layer_height * 2
-switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 16.5
 top_bottom_thickness = 1.4
 travel_avoid_distance = 3
 wall_0_inset = 0
-wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
+wall_line_width_x = =wall_line_width
 wall_thickness = 2
-

resources/variants/ultimaker3_extended_bb0.8.inst.cfg

@@ -28,6 +28,8 @@ machine_nozzle_size = 0.8
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_wipe_enabled = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0
 raft_base_speed = 20
@@ -41,6 +43,7 @@ raft_speed = 25
 raft_surface_layers = 1
 retraction_amount = 4.5
 retraction_count_max = 15
+retraction_extrusion_window = =retraction_amount
 retraction_hop = 2
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
@@ -70,5 +73,5 @@ switch_extruder_retraction_amount = 12
 top_bottom_thickness = 1
 travel_avoid_distance = 3
 wall_0_inset = 0
+wall_line_width_x = =wall_line_width
 wall_thickness = 1
-