Merge branch 'fix/creawsomemod' of https://github.com/trouch/Cura into trouch-fix/creawsomemod

resources/definitions/creawsome_base.def.json

@@ -0,0 +1,158 @@
+{
+    "id": "creawsome_base",
+    "name": "Custom Machine",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome CR-10" },
+        "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"},
+        "machine_end_gcode": { "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
+
+        "machine_max_feedrate_x": { "value": 500 },
+        "machine_max_feedrate_y": { "value": 500 },
+        "machine_max_feedrate_z": { "value": 5 },
+        "machine_max_feedrate_e": { "value": 50 },
+
+        "machine_max_acceleration_x": { "value": 500 },
+        "machine_max_acceleration_Y": { "value": 500 },
+        "machine_max_acceleration_z": { "value": 100 },
+        "machine_max_acceleration_e": { "value": 5000 },
+        "machine_acceleration": { "value": 500 },
+
+        "machine_max_jerk_xy": { "value": 10 },
+        "machine_max_jerk_z": { "value": 0.4 },
+        "machine_max_jerk_e": { "value": 5 },
+
+        "machine_heated_bed": { "default_value": true },
+
+        "material_diameter": { "default_value": 1.75 },
+
+        "acceleration_print": { "value": 500 },
+        "acceleration_travel": { "value": 500 },
+        "acceleration_travel_layer_0": { "value": "acceleration_travel" },
+        "acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
+
+        "jerk_print": { "value": 8 },
+        "jerk_travel": { "value": "jerk_print" },
+        "jerk_travel_layer_0": { "value": "jerk_travel" },
+
+        "acceleration_enabled": { "value": false },
+        "jerk_enabled": { "value": false },
+
+        "speed_print": { "value": 50.0 } ,
+        "speed_infill": { "value": "speed_print" },
+        "speed_wall": { "value": "speed_print / 2" },
+        "speed_wall_0": { "value": "speed_wall" },
+        "speed_wall_x": { "value": "speed_wall" },
+        "speed_topbottom": { "value": "speed_print / 2" },
+        "speed_roofing": { "value": "speed_topbottom" },
+        "speed_travel": { "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" },
+        "speed_layer_0": { "value": 20.0 },
+        "speed_print_layer_0": { "value": "speed_layer_0" },
+        "speed_travel_layer_0": { "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
+        "speed_prime_tower": { "value": "speed_topbottom" },
+        "speed_support": { "value": "speed_wall_0" },
+        "speed_support_interface": { "value": "speed_topbottom" },
+
+        "skirt_brim_speed": { "value": "speed_layer_0" },
+
+        "line_width": { "value": "machine_nozzle_size * 1.25"},
+
+        "material_initial_print_temperature": { "value": "material_print_temperature"},
+        "material_final_print_temperature": { "value": "material_print_temperature"},
+        "material_flow": { "value": 100},
+
+        "z_seam_type": { "value": "'back'"},
+        "z_seam_corner": { "value": "'z_seam_corner_none'"},
+        
+        "infill_before_walls": { "value": false },
+        "infill_overlap": { "value": 30.0 },
+        "skin_overlap": { "value": 10.0 },
+        "infill_wipe_dist": { "value": 0.0 },
+
+        "retraction_speed": {
+            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
+            "maximum_value": 200
+        },
+        "retraction_retract_speed": {
+            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
+            "maximum_value": 200
+        },
+        "retraction_prime_speed": {
+            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
+            "maximum_value": 200
+        },
+        "retraction_combing": { "value": "'off'"},
+        "retraction_enable": { "value": true },
+        "retraction_count_max": { "value": 100 },
+        "retraction_extrusion_window": { "value": 10 },
+        "retraction_min_travel": { "value": 1.5 },
+        "retraction_hop_enabled": { "value": true },
+        "retraction_hop": { "value": 0.2 },
+
+        "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
+        "cool_fan_enabled": { "value": true },
+        "cool_min_layer_time": { "value": 10 },
+
+        "adhesion_type": { "value": "'none' if support_enable else 'skirt'" },
+        "brim_replaces_support": { "value": false},
+        "skirt_gap": { "value": 10.0 },
+        "skirt_line_count": { "value": 4 },
+
+        "adaptive_layer_height_variation": { "value": 0.04},
+        "adaptive_layer_height_variation_step": { "value": 0.04 },
+
+        "meshfix_maximum_resolution": { "value": "0.05" },
+        "meshfix_maximum_travel_resolution": { "value": "meshfix_maximum_resolution" },
+
+        "support_type": { "value": "'buildplate'"},
+        "support_angle": { "value": 65 },
+        "support_pattern": { "value": "'zigzag'" },
+        "support_infill_rate": { "value": "0 if support_tree_enable else 20" },
+        "support_use_towers": { "value": false },
+        "support_xy_distance": { "value": "wall_line_width_0 * 2" },
+        "support_xy_distance_overhang": { "value": "wall_line_width_0" },
+        "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
+        "support_wall_count": { "value": 1},
+        "support_brim_enable": { "value": true},
+        "support_brim_width": { "value": 4},
+
+        "support_interface_enable": { "value": true },
+        "support_interface_height": { "value": "layer_height * 4" },
+        "support_interface_density": { "value": 33.333 },
+        "support_interface_pattern": { "value": "'grid'" },
+        "support_interface_skip_height": { "value": 0.2},
+        "minimum_support_area": { "value": 10},
+        "minimum_interface_area": { "value": 10}
+
+    },
+    "metadata": {
+        "visible": true,
+        "author": "trouch.com",
+        "manufacturer": "CreawsomeMod",
+        "category": "CreawsomeMod",
+        "file_formats": "text/x-gcode",
+        "first_start_actions": ["MachineSettingsAction"],
+
+        "machine_extruder_trains": {
+            "0": "creawsome_base_extruder_0"
+        },
+
+        "has_materials": true,
+        "has_variants": true,
+        "has_machine_quality": true,
+        "has_machine_materials": true,
+        "variants_name": "Nozzle Size",
+
+        "preferred_variant_name": "0.4mm Nozzle",
+        "preferred_quality_type": "standard",
+        "preferred_material": "generic_pla",
+        "exclude_materials": [
+            "generic_cpe","generic_cpe_175",
+            "generic_hips","generic_hips_175",
+            "generic_nylon","generic_nylon_175",
+            "generic_pc","generic_pc_175",
+            "generic_pva","generic_pva_175"
+        ]
+    }
+}

resources/definitions/creawsome_cr10.def.json

@@ -0,0 +1,33 @@
+{
+    "id": "creawsome_cr10",
+    "name": "Creality CR-10",
+    "version": 2,
+    "inherits": "creawsome_base",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome CR-10" },
+        "machine_width": { "default_value": 300 },
+        "machine_depth": { "default_value": 300 },
+        "machine_height": { "default_value": 400 },
+        "machine_head_polygon": { "default_value": [
+                [-26, 34],
+                [-26, -32],
+                [22, -32],
+                [22, 34]
+            ]
+        },
+        "machine_head_with_fans_polygon": { "default_value": [
+                [-26, 34],
+                [-26, -32],
+                [32, -32],
+                [32, 34]
+            ]
+        },
+
+        "gantry_height": { "value": 25 }
+
+    },
+    "metadata": {
+        "quality_definition": "creawsome_base"
+        
+    }
+}

resources/definitions/creawsome_cr10mini.def.json

@@ -0,0 +1,33 @@
+{
+    "id": "creawsome_cr10mini",
+    "name": "Creality CR-10 Mini",
+    "version": 2,
+    "inherits": "creawsome_base",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome CR-10 Mini" },
+        "machine_width": { "default_value": 300 },
+        "machine_depth": { "default_value": 220 },
+        "machine_height": { "default_value": 300 },
+        "machine_head_polygon": { "default_value": [
+                [-26, 34],
+                [-26, -32],
+                [22, -32],
+                [22, 34]
+            ]
+        },
+        "machine_head_with_fans_polygon": { "default_value": [
+                [-26, 34],
+                [-26, -32],
+                [32, -32],
+                [32, 34]
+            ]
+        },
+
+        "gantry_height": { "value": 25 }
+
+    },
+    "metadata": {
+        "quality_definition": "creawsome_base"
+
+    }
+}

resources/definitions/creawsome_cr10s.def.json

@@ -0,0 +1,13 @@
+{
+    "id": "creawsome_cr10s",
+    "name": "Creality CR-10S",
+    "version": 2,
+    "inherits": "creawsome_cr10",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome CR-10S" }
+    },
+    "metadata": {
+        "quality_definition": "creawsome_base"
+
+    }
+}

resources/definitions/creawsome_cr10s4.def.json

@@ -0,0 +1,33 @@
+{
+    "id": "creawsome_cr10s4",
+    "name": "Creality CR-10S4",
+    "version": 2,
+    "inherits": "creawsome_base",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome CR-10S4" },
+        "machine_width": { "default_value": 400 },
+        "machine_depth": { "default_value": 400 },
+        "machine_height": { "default_value": 400 },
+        "machine_head_polygon": { "default_value": [
+                [-26, 34],
+                [-26, -32],
+                [22, -32],
+                [22, 34]
+            ]
+        },
+        "machine_head_with_fans_polygon": { "default_value": [
+                [-26, 34],
+                [-26, -32],
+                [32, -32],
+                [32, 34]
+            ]
+        },
+
+        "gantry_height": { "value": 25 }
+
+    },
+    "metadata": {
+        "quality_definition": "creawsome_base"
+
+    }
+}

resources/definitions/creawsome_cr10s5.def.json

@@ -0,0 +1,33 @@
+{
+    "id": "creawsome_cr10s5",
+    "name": "Creality CR-10S5",
+    "version": 2,
+    "inherits": "creawsome_base",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome CR-10S5" },
+        "machine_width": { "default_value": 500 },
+        "machine_depth": { "default_value": 500 },
+        "machine_height": { "default_value": 500 },
+        "machine_head_polygon": { "default_value": [
+                [-26, 34],
+                [-26, -32],
+                [22, -32],
+                [22, 34]
+            ]
+        },
+        "machine_head_with_fans_polygon": { "default_value": [
+                [-26, 34],
+                [-26, -32],
+                [32, -32],
+                [32, 34]
+            ]
+        },
+
+        "gantry_height": { "value": 25 }
+
+    },
+    "metadata": {
+        "quality_definition": "creawsome_base"
+
+    }
+}

resources/definitions/creawsome_cr10spro.def.json

@@ -0,0 +1,32 @@
+{
+    "id": "creawsome_cr10spro",
+    "name": "Creality CR-10S Pro",
+    "version": 2,
+    "inherits": "creawsome_cr10",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome CR-10S Pro" },
+        "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\nM420 S1 Z2 ;Enable ABL using saved Mesh and Fade Height\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"},
+        "machine_head_polygon": { "default_value": [
+                [-44, 34],
+                [-44, -34],
+                [18, -34],
+                [18, 34]
+            ]
+        },
+        "machine_head_with_fans_polygon": { "default_value": [
+                [-44, 34],
+                [-44, -34],
+                [38, -34],
+                [38, 34]
+            ]
+        },
+
+        "gantry_height": { "value": 30 }
+
+    },
+    "metadata": {
+        "quality_definition": "creawsome_base",
+        "platform": "creawsome_cr10spro.stl",
+        "platform_offset": [ -150, 0, 150]
+    }
+}

resources/definitions/creawsome_cr20.def.json

@@ -0,0 +1,33 @@
+{
+    "id": "creawsome_cr20",
+    "name": "Creality CR-20",
+    "version": 2,
+    "inherits": "creawsome_base",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome CR-20" },
+        "machine_width": { "default_value": 220 },
+        "machine_depth": { "default_value": 220 },
+        "machine_height": { "default_value": 250 },
+        "machine_head_polygon": { "default_value": [
+                [-26, 34],
+                [-26, -32],
+                [22, -32],
+                [22, 34]
+            ]
+        },
+        "machine_head_with_fans_polygon": { "default_value": [
+                [-26, 34],
+                [-26, -32],
+                [32, -32],
+                [32, 34]
+            ]
+        },
+
+        "gantry_height": { "value": 25 }
+
+    },
+    "metadata": {
+        "quality_definition": "creawsome_base"
+
+    }
+}

resources/definitions/creawsome_cr20pro.def.json

@@ -0,0 +1,15 @@
+{
+    "id": "creawsome_cr20pro",
+    "name": "Creality CR-20 Pro",
+    "version": 2,
+    "inherits": "creawsome_cr20",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome CR-20 Pro" },
+        "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\nM420 S1 Z2 ;Enable ABL using saved Mesh and Fade Height\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"}
+
+    },
+    "metadata": {
+        "quality_definition": "creawsome_base"
+
+    }
+}

resources/definitions/creawsome_ender2.def.json

@@ -0,0 +1,34 @@
+{
+    "id": "creawsome_ender2",
+    "name": "Creality Ender-2",
+    "version": 2,
+    "inherits": "creawsome_base",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome Ender-2" },
+        "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y100.0 Z0.28 F1500.0 E8 ;Draw the first line\nG1 X10.4 Y100.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"},
+        "machine_width": { "default_value": 150 },
+        "machine_depth": { "default_value": 150 },
+        "machine_height": { "default_value": 200 },
+        "machine_head_polygon": { "default_value": [
+                [-26, 34],
+                [-26, -32],
+                [22, -32],
+                [22, 34]
+            ]
+        },
+        "machine_head_with_fans_polygon": { "default_value": [
+                [-26, 34],
+                [-26, -32],
+                [32, -32],
+                [32, 34]
+            ]
+        },
+
+        "gantry_height": { "value": 25 }
+
+    },
+    "metadata": {
+        "quality_definition": "creawsome_base"
+
+    }
+}