Updated PC profiles for um2p

resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg

@@ -16,7 +16,7 @@ cool_min_speed = 15
 cool_fan_speed = 50
 raft_surface_line_width = 0.2
 wall_thickness = 0.88
-raft_airgap = 0.5
+raft_airgap = 0.25
 infill_overlap = 5
 layer_height = 0.06
 raft_interface_line_width = 0.5
@@ -28,10 +28,9 @@ support_enable = True
 raft_margin = 15
 adhesion_type = raft
 infill_sparse_density = 25
-layer_0_z_overlap = 0.22
+layer_0_z_overlap = 0.2
 cool_min_layer_time = 2
 speed_print = 30
 speed_layer_0 = =round(speed_print * 30 / 30)
 raft_base_line_spacing = 1
 raft_base_line_width = 0.5
-

resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg

@@ -16,7 +16,7 @@ cool_min_speed = 15
 cool_fan_speed = 50
 raft_surface_line_width = 0.2
 wall_thickness = 0.88
-raft_airgap = 0.5
+raft_airgap = 0.25
 infill_overlap = 5
 layer_height = 0.1
 raft_interface_line_width = 0.5
@@ -28,10 +28,9 @@ support_enable = True
 raft_margin = 15
 adhesion_type = raft
 infill_sparse_density = 25
-layer_0_z_overlap = 0.22
+layer_0_z_overlap = 0.2
 cool_min_layer_time = 2
 speed_print = 30
 speed_layer_0 = =round(speed_print * 30 / 30)
 raft_base_line_spacing = 1
-raft_base_line_width = 0.5
-
+raft_base_line_width = 0.5

resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg

@@ -12,7 +12,7 @@ quality_type = fast
 [values]
 speed_wall_x = 30
 support_z_distance = 0.19
-raft_airgap = 0.57
+raft_airgap = 0.35
 cool_min_speed = 8
 cool_fan_speed = 50
 raft_interface_line_spacing = 1
@@ -28,11 +28,10 @@ support_enable = True
 raft_margin = 15
 adhesion_type = raft
 infill_sparse_density = 30
-layer_0_z_overlap = 0.22
+layer_0_z_overlap = 0.3
 cool_min_layer_time = 3
 speed_print = 45
 speed_layer_0 = =round(speed_print * 30 / 45)
 support_angle = 45
 raft_base_line_spacing = 1.6
-raft_base_line_width = 0.8
-
+raft_base_line_width = 0.8

resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg

@@ -12,7 +12,7 @@ quality_type = normal
 [values]
 speed_wall_x = 30
 support_z_distance = 0.19
-raft_airgap = 0.57
+raft_airgap = 0.35
 cool_min_speed = 8
 cool_fan_speed = 50
 raft_interface_line_spacing = 1
@@ -28,11 +28,10 @@ support_enable = True
 raft_margin = 15
 adhesion_type = raft
 infill_sparse_density = 30
-layer_0_z_overlap = 0.22
+layer_0_z_overlap = 0.3
 cool_min_layer_time = 3
 speed_print = 45
 speed_layer_0 = =round(speed_print * 30 / 45)
 support_angle = 45
 raft_base_line_spacing = 1.6
-raft_base_line_width = 0.8
-
+raft_base_line_width = 0.8