Update translation templates for 3.0 release

These are generated by calling 'make extract-messages' and then modifying the headers a bit.

Contributes to issue CURA-4341.

resources/i18n/fdmextruder.def.json.pot

@@ -5,7 +5,7 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 2.7\n"
+"Project-Id-Version: Cura 3.0\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
 "POT-Creation-Date: 2017-08-02 16:53+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"

resources/i18n/fdmprinter.def.json.pot

@@ -5,7 +5,7 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 2.7\n"
+"Project-Id-Version: Cura 3.0\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
 "POT-Creation-Date: 2017-08-02 16:53+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
@@ -809,18 +809,6 @@ msgctxt "shell description"
 msgid "Shell"
 msgstr ""
 
-#: fdmprinter.def.json
-msgctxt "wall_extruder_nr label"
-msgid "Wall Extruder"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "wall_extruder_nr description"
-msgid ""
-"The extruder train used for printing the walls. This is used in multi-"
-"extrusion."
-msgstr ""
-
 #: fdmprinter.def.json
 msgctxt "wall_0_extruder_nr label"
 msgid "Outer Wall Extruder"
@@ -1248,6 +1236,11 @@ msgctxt "z_seam_type option random"
 msgid "Random"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "z_seam_type option sharpest_corner"
+msgid "Sharpest Corner"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_x label"
 msgid "Z Seam X"
@@ -1272,6 +1265,41 @@ msgid ""
 "layer."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "z_seam_corner label"
+msgid "Seam Corner Preference"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "z_seam_corner description"
+msgid ""
+"Control whether corners on the model outline influence the position of the "
+"seam. None means that corners have no influence on the seam position. Hide "
+"Seam makes the seam more likely to occur on an inside corner. Expose Seam "
+"makes the seam more likely to occur on an outside corner. Hide or Expose "
+"Seam makes the seam more likely to occur at an inside or outside corner."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "z_seam_corner option z_seam_corner_none"
+msgid "None"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "z_seam_corner option z_seam_corner_inner"
+msgid "Hide Seam"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "z_seam_corner option z_seam_corner_outer"
+msgid "Expose Seam"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "z_seam_corner option z_seam_corner_any"
+msgid "Hide or Expose Seam"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_relative label"
 msgid "Z Seam Relative"
@@ -1298,6 +1326,19 @@ msgid ""
 "case, disable the setting."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "skin_outline_count label"
+msgid "Extra Skin Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skin_outline_count description"
+msgid ""
+"Replaces the outermost part of the top/bottom pattern with a number of "
+"concentric lines. Using one or two lines improves roofs that start on infill "
+"material."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
@@ -1351,9 +1392,9 @@ msgctxt "infill_pattern description"
 msgid ""
 "The pattern of the infill material of the print. The line and zig zag infill "
 "swap direction on alternate layers, reducing material cost. The grid, "
-"triangle, cubic, tetrahedral and concentric patterns are fully printed every "
-"layer. Cubic and tetrahedral infill change with every layer to provide a "
-"more equal distribution of strength over each direction."
+"triangle, cubic, octet, quarter cubic and concentric patterns are fully "
+"printed every layer. Cubic, quarter cubic and octet infill change with every "
+"layer to provide a more equal distribution of strength over each direction."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -1383,7 +1424,12 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "infill_pattern option tetrahedral"
-msgid "Tetrahedral"
+msgid "Octet"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "infill_pattern option quarter_cubic"
+msgid "Quarter Cubic"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -1401,6 +1447,31 @@ msgctxt "infill_pattern option zigzag"
 msgid "Zig Zag"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "infill_pattern option cross"
+msgid "Cross"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "infill_pattern option cross_3d"
+msgid "Cross 3D"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "zig_zaggify_infill label"
+msgid "Connect Infill Lines"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "zig_zaggify_infill description"
+msgid ""
+"Connect the ends where the infill pattern meets the inner wall using a lines "
+"which follows the shape of the inner wall. Enabling this setting can make "
+"the infill adhere to the walls better and reduces the effects on infill on "
+"the quality of vertical surfaces. Disabling this setting reduces the amount "
+"of material used."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "infill_angles label"
 msgid "Infill Line Directions"
@@ -1555,42 +1626,45 @@ msgid "Don't generate areas of infill smaller than this (use skin instead)."
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "expand_skins_into_infill label"
-msgid "Expand Skins Into Infill"
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "expand_skins_into_infill description"
+msgctxt "skin_preshrink description"
 msgid ""
-"Expand skin areas of top and/or bottom skin of flat surfaces. By default, "
-"skins stop under the wall lines that surround infill but this can lead to "
-"holes appearing when the infill density is low. This setting extends the "
-"skins beyond the wall lines so that the infill on the next layer rests on "
-"skin."
+"The largest width of skin areas which are to be removed. Every skin area "
+"smaller than this value will disappear. This can help in limiting the amount "
+"of time and material spent on printing top/bottom skin at slanted surfaces "
+"in the model."
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "expand_upper_skins label"
-msgid "Expand Top Skins Into Infill"
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "expand_upper_skins description"
+msgctxt "top_skin_preshrink description"
 msgid ""
-"Expand the top skin areas (areas with air above) so that they support infill "
-"above."
+"The largest width of top skin areas which are to be removed. Every skin area "
+"smaller than this value will disappear. This can help in limiting the amount "
+"of time and material spent on printing top skin at slanted surfaces in the "
+"model."
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "expand_lower_skins label"
-msgid "Expand Bottom Skins Into Infill"
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "expand_lower_skins description"
+msgctxt "bottom_skin_preshrink description"
 msgid ""
-"Expand the bottom skin areas (areas with air below) so that they are "
-"anchored by the infill layers above and below."
+"The largest width of bottom skin areas which are to be removed. Every skin "
+"area smaller than this value will disappear. This can help in limiting the "
+"amount of time and material spent on printing bottom skin at slanted "
+"surfaces in the model."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -1601,10 +1675,37 @@ msgstr ""
 #: fdmprinter.def.json
 msgctxt "expand_skins_expand_distance description"
 msgid ""
-"The distance the skins are expanded into the infill. The default distance is "
-"enough to bridge the gap between the infill lines and will stop holes "
-"appearing in the skin where it meets the wall when the infill density is "
-"low. A smaller distance will often be sufficient."
+"The distance the skins are expanded into the infill. Higher values makes the "
+"skin attach better to the infill pattern and makes the walls on neighboring "
+"layers adhere better to the skin. Lower values save amount of material used."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid ""
+"The distance the top skins are expanded into the infill. Higher values makes "
+"the skin attach better to the infill pattern and makes the walls on the "
+"layer above adhere better to the skin. Lower values save amount of material "
+"used."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid ""
+"The distance the bottom skins are expanded into the infill. Higher values "
+"makes the skin attach better to the infill pattern and makes the skin adhere "
+"better to the walls on the layer below. Lower values save amount of material "
+"used."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2047,16 +2148,6 @@ msgctxt "speed_topbottom description"
 msgid "The speed at which top/bottom layers are printed."
 msgstr ""
 
-#: fdmprinter.def.json
-msgctxt "speed_ironing label"
-msgid "Ironing Speed"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "speed_ironing description"
-msgid "The speed at which to pass over the top surface."
-msgstr ""
-
 #: fdmprinter.def.json
 msgctxt "speed_support label"
 msgid "Support Speed"
@@ -2324,16 +2415,6 @@ msgctxt "acceleration_topbottom description"
 msgid "The acceleration with which top/bottom layers are printed."
 msgstr ""
 
-#: fdmprinter.def.json
-msgctxt "acceleration_ironing label"
-msgid "Ironing Acceleration"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "acceleration_ironing description"
-msgid "The acceleration with which ironing is performed."
-msgstr ""
-
 #: fdmprinter.def.json
 msgctxt "acceleration_support label"
 msgid "Support Acceleration"
@@ -2545,16 +2626,6 @@ msgid ""
 "printed."
 msgstr ""
 
-#: fdmprinter.def.json
-msgctxt "jerk_ironing label"
-msgid "Ironing Jerk"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "jerk_ironing description"
-msgid "The maximum instantaneous velocity change while performing ironing."
-msgstr ""
-
 #: fdmprinter.def.json
 msgctxt "jerk_support label"
 msgid "Support Jerk"
@@ -3165,6 +3236,11 @@ msgctxt "support_pattern option zigzag"
 msgid "Zig Zag"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "support_pattern option cross"
+msgid "Cross"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "support_connect_zigzags label"
 msgid "Connect Support ZigZags"
@@ -3179,25 +3255,38 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_skip_some_zags label"
-msgid "Skip Some ZigZags Connections"
+msgid "Break Up Support In Chunks"
 msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_skip_some_zags description"
 msgid ""
-"Skip some ZigZags connections to make the support structure easier to break."
+"Skip some support line connections to make the support structure easier to "
+"break away. This setting is applicable to the Zig Zag support infill pattern."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_skip_zag_per_mm label"
+msgid "Support Chunk Size"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_skip_zag_per_mm description"
+msgid ""
+"Leave out a connection between support lines once every N millimeter to make "
+"the support structure easier to break away."
 msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_zag_skip_count label"
-msgid "ZigZag Connection Skip Count"
+msgid "Support Chunk Line Count"
 msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_zag_skip_count description"
 msgid ""
 "Skip one in every N connection lines to make the support structure easier to "
-"break."
+"break away."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -3880,6 +3969,32 @@ msgid ""
 "that much."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "z_offset_layer_0 label"
+msgid "Initial Layer Z Offset"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "z_offset_layer_0 description"
+msgid ""
+"The extruder is offset from the normal height of the first layer by this "
+"amount. It can be positive (raised) or negative (lowered). Some filament "
+"types adhere to the build plate better if the extruder is raised slightly."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "z_offset_taper_layers label"
+msgid "Z Offset Taper Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "z_offset_taper_layers description"
+msgid ""
+"When non-zero, the Z offset is reduced to 0 over that many layers. A value "
+"of 0 means that the Z offset remains constant for all the layers in the "
+"print."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "raft_margin label"
 msgid "Raft Extra Margin"
@@ -3893,6 +4008,20 @@ msgid ""
 "while using more material and leaving less area for your print."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "raft_smoothing label"
+msgid "Raft Smoothing"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_smoothing description"
+msgid ""
+"This setting control how much inner corners in the raft outline are rounded. "
+"Inward corners are rounded to a semi circle with a radius equal to the value "
+"given here. This setting also removes holes in the raft outline which are "
+"smaller than such a circle."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "raft_airgap label"
 msgid "Raft Air Gap"
@@ -4683,6 +4812,22 @@ msgid ""
 "layer view). Note that smoothing will tend to blur fine surface details."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "relative_extrusion label"
+msgid "Relative Extrusion"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "relative_extrusion description"
+msgid ""
+"Use relative extrusion rather than absolute extrusion. Using relative E-"
+"steps makes for easier post-processing of the Gcode. However, it's not "
+"supported by all printers and it may produce very slight deviations in the "
+"amount of deposited material compared to absolute E-steps. Irrespective of "
+"this setting, the extrusion mode will always be set to absolute before any "
+"Gcode script is output."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "experimental label"
 msgid "Experimental"
@@ -4693,6 +4838,20 @@ msgctxt "experimental description"
 msgid "experimental!"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "optimize_wall_printing_order label"
+msgid "Optimize Wall Printing Order"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "optimize_wall_printing_order description"
+msgid ""
+"Optimize the order in which walls are printed so as to reduce the number of "
+"retractions and the distance travelled. Most parts will benefit from this "
+"being enabled but some may actually take longer so please compare the print "
+"time estimates with and without optimization."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "draft_shield_enabled label"
 msgid "Enable Draft Shield"
@@ -4828,29 +4987,41 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "skin_outline_count label"
-msgid "Extra Skin Wall Count"
+msgctxt "skin_alternate_rotation label"
+msgid "Alternate Skin Rotation"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "skin_outline_count description"
+msgctxt "skin_alternate_rotation description"
 msgid ""
-"Replaces the outermost part of the top/bottom pattern with a number of "
-"concentric lines. Using one or two lines improves roofs that start on infill "
-"material."
+"Alternate the direction in which the top/bottom layers are printed. Normally "
+"they are printed diagonally only. This setting adds the X-only and Y-only "
+"directions."
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "skin_alternate_rotation label"
-msgid "Alternate Skin Rotation"
+msgctxt "cross_infill_pocket_size label"
+msgid "Cross 3D Pocket Size"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "skin_alternate_rotation description"
+msgctxt "cross_infill_pocket_size description"
 msgid ""
-"Alternate the direction in which the top/bottom layers are printed. Normally "
-"they are printed diagonally only. This setting adds the X-only and Y-only "
-"directions."
+"The size of pockets at four-way crossings in the cross 3D pattern at heights "
+"where the pattern is touching itself."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "cross_infill_apply_pockets_alternatingly label"
+msgid "Alternate Cross 3D Pockets"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "cross_infill_apply_pockets_alternatingly description"
+msgid ""
+"Only apply pockets at half of the four-way crossings in the cross 3D pattern "
+"and alternate the location of the pockets between heights where the pattern "
+"is touching itself."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -5365,6 +5536,18 @@ msgid ""
 "surface."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "ironing_only_highest_layer label"
+msgid "Iron Only Highest Layer"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_only_highest_layer description"
+msgid ""
+"Only perform ironing on the very last layer of the mesh. This saves time if "
+"the lower layers don't need a smooth surface finish."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "ironing_pattern label"
 msgid "Ironing Pattern"
@@ -5421,6 +5604,36 @@ msgid ""
 "edge of the mesh may result in a jagged edge on your print."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "speed_ironing label"
+msgid "Ironing Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "speed_ironing description"
+msgid "The speed at which to pass over the top surface."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "acceleration_ironing label"
+msgid "Ironing Acceleration"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "acceleration_ironing description"
+msgid "The acceleration with which ironing is performed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "jerk_ironing label"
+msgid "Ironing Jerk"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "jerk_ironing description"
+msgid "The maximum instantaneous velocity change while performing ironing."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"