Fix incorrectly setting material_print_temperature

If this is set to an absolute value, the material settings wont have any effect anymore.
A much better way is to just set the default temperature, which is what the intent is

resources/definitions/SV02.def.json

@@ -28,7 +28,7 @@
         "retraction_speed": { "default_value": 50},
         "gantry_height": { "value": "30" },
         "speed_print": { "default_value": 50 },		
-	    "material_print_temperature": { "value": 195 },
+	    "default_material_print_temperature": { "value": 195 },
         "material_print_temperature_layer_0": { "value": "material_print_temperature" },
         "material_initial_print_temperature": { "value": "material_print_temperature" },
         "material_final_print_temperature": { "value": 195 },		
@@ -41,11 +41,9 @@
         "machine_max_acceleration_z": { "value": 100 },
         "machine_max_acceleration_e": { "value": 500 },
         "machine_acceleration": { "value": 500 },
-        "machine_max_jerk_xy": { "value": 8 },
-        "machine_max_jerk_z": { "value": 0.4 },
-        "machine_max_jerk_e": { "value": 5 },
+
         "material_diameter": { "default_value": 1.75 },
-        "infill_overlap": { "default_value": 15	},
+
         "acceleration_print": { "value": 500 },
         "acceleration_travel": { "value": 500 },
         "acceleration_travel_layer_0": { "value": "acceleration_travel" },

resources/definitions/crazy3dprint_cz_300.def.json

@@ -36,9 +36,8 @@
 		"min_infill_area": {  "default_value": 2.0 },
 		"retract_at_layer_change": { "default_value": true },
 		"default_material_print_temperature": {  "default_value": 210 },
-		"material_print_temperature": { "value": 210 },
 		"material_final_print_temperature": {  "value": 210 },
-		"material_bed_temperature": { "value": 70 },
+		"default_material_bed_temperature": { "value": 70 },
         "material_bed_temperature_layer_0": {  "value": 70 },
 		"material_flow_layer_0": {"value": 140},
 		"retraction_amount": {  "default_value": 10 },

resources/definitions/creality_ender6.def.json

@@ -14,8 +14,8 @@
         "infill_sparse_density": { "value": "10"},
         "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'grid'"},
         "infill_overlap":{"value": 10},    
-        "material_print_temperature":{"value": 220},
-        "material_bed_temperature":{"value": 50},
+        "default_material_print_temperature":{"value": 220},
+        "default_material_bed_temperature":{"value": 50},
         "retraction_amount":{"value": 10},  
         "speed_travel": { "value": 80.0 },
         "coasting_enable": { "value": true},

resources/definitions/cremaker_common.def.json

@@ -24,7 +24,6 @@
     "xy_offset": { "value": 0.1 },
     "xy_offset_layer_0": { "value": -0.1 },
     "hole_xy_offset": { "value": 0.15 },
-    "material_print_temperature": { "value": 200 },
     "speed_travel": { "value": 100 },
     "speed_layer_0": { "value": 25 },
     "acceleration_enabled": { "value": true },

resources/definitions/eryone_er20.def.json

@@ -53,7 +53,7 @@
         "machine_end_gcode": {
             "default_value": "G91 ;Relative positioning\nG1 Z5 F720 ;Raise Z\nG1 E-5 F300 ;Retract a bit to protect nozzle\nM104 S0 ;Turn off extruder\nM140 S0 ;Turn off bed\nM107 ;Turn off all fans\nG90 ;Absolute positioning\nG1 X230 Y200 F4800 ;Parking the hotend\nM84 X Y E ;All steppers off but left Z\n"
         },
-        "material_print_temperature": {
+        "default_material_print_temperature": {
             "value": 205
         },
         "material_print_temperature_layer_0": {
@@ -103,7 +103,7 @@
         "infill_before_walls": {
             "value": false
         },
-        "material_bed_temperature": {
+        "default_material_bed_temperature": {
             "value": 60
         },
         "material_bed_temperature_layer_0": {

resources/definitions/eryone_thinker.def.json

@@ -138,7 +138,6 @@
             "value": "material_print_temperature"
         },
         "material_bed_temperature": {
-            "value": "default_material_bed_temperature",
             "maximum_value_warning": 100
         },
         "material_bed_temperature_layer_0": {

resources/definitions/hms434.def.json

@@ -113,7 +113,6 @@
         "material_initial_print_temperature":     {"value": "material_print_temperature",
                                                    "maximum_value_warning": "material_print_temperature + 15",
                                                    "maximum_value": "401" },
-        "material_initial_print_temperature":     {"maximum_value": "401" },
         "material_final_print_temperature":       {"value": "material_print_temperature",
                                                    "maximum_value": "401" },
         "material_break_preparation_temperature": {"maximum_value": "401" },

resources/definitions/koonovo_base.def.json

@@ -58,7 +58,7 @@
         "infill_sparse_density": { "value": "15" },
         "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },
     
-        "material_print_temperature": { "value": "195" }, 
+        "default_material_print_temperature": { "value": "195" },
         "material_print_temperature_layer_0": { "value": "material_print_temperature" },       
         "material_initial_print_temperature": { "value": "material_print_temperature" },
         "material_final_print_temperature": { "value": "material_print_temperature" },

resources/definitions/koonovo_kn3.def.json

@@ -75,12 +75,11 @@
         "infill_sparse_density": { "value": "15" },
         "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },
     
-        "material_print_temperature": { "value": "195" }, 
+        "default_material_print_temperature": { "value": "195" },
         "material_print_temperature_layer_0": { "value": "material_print_temperature" },       
         "material_initial_print_temperature": { "value": "material_print_temperature" },
         "material_final_print_temperature": { "value": "material_print_temperature" },
-        "material_bed_temperature": { "value": "55" },       
-        "material_bed_temperature_layer_0": { "value": "material_bed_temperature" },
+        "default_material_bed_temperature": { "value": "55" },
         "material_flow": { "value": 100 },
         "material_standby_temperature": { "value": "material_print_temperature" },
 

resources/definitions/koonovo_kn5.def.json

@@ -77,13 +77,12 @@
         "infill_sparse_density": { "value": "15" },
         "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },
     
-        "material_print_temperature": { "value": "195" }, 
+        "default_material_print_temperature": { "value": "195" },
         "material_print_temperature_layer_0": { "value": "material_print_temperature" },       
         "material_initial_print_temperature": { "value": "material_print_temperature" },
         "material_final_print_temperature": { "value": "material_print_temperature" },
         "material_standby_temperature": { "value": "material_print_temperature" },
-        "material_bed_temperature": { "value": "45" },       
-        "material_bed_temperature_layer_0": { "value": "material_bed_temperature" },
+        "default_material_bed_temperature": { "value": "45" },
         "material_flow": { "value": 100 },
 
         "speed_print": { "value": 50.0 } ,