Remove all references to Wall Compensation from the resources/

CURA-7559

resources/definitions/anet3d.def.json

@@ -74,7 +74,6 @@
         "material_initial_print_temperature": { "value": "material_print_temperature" },
         "material_final_print_temperature": { "value": "material_print_temperature" },
         "material_flow": { "value": 100 },
-        "travel_compensate_overlapping_walls_0_enabled": { "value": "False" },
 
         "z_seam_type": { "value": "'back'" },
         "z_seam_corner": { "value": "'z_seam_corner_weighted'" },

resources/definitions/creality_base.def.json

@@ -183,7 +183,6 @@
         "material_initial_print_temperature": { "value": "material_print_temperature" },
         "material_final_print_temperature": { "value": "material_print_temperature" },
         "material_flow": { "value": 100 },
-        "travel_compensate_overlapping_walls_0_enabled": { "value": "False" },
 
         "z_seam_type": { "value": "'back'" },
         "z_seam_corner": { "value": "'z_seam_corner_weighted'" },

resources/definitions/cubicon_common.def.json

@@ -20,9 +20,6 @@
         "machine_heated_bed": {
             "default_value": true
         },
-        "travel_compensate_overlapping_walls_enabled": {
-            "default_value": false
-        },
         "layer_height": {
             "default_value": 0.2
         },

resources/definitions/fdmprinter.def.json

@@ -1283,38 +1283,6 @@
                     "limit_to_extruder": "infill_extruder_nr",
                     "settable_per_mesh": true
                 },
-                "travel_compensate_overlapping_walls_enabled":
-                {
-                    "label": "Compensate Wall Overlaps",
-                    "description": "Compensate the flow for parts of a wall being printed where there is already a wall in place.",
-                    "type": "bool",
-                    "default_value": true,
-                    "limit_to_extruder": "wall_x_extruder_nr",
-                    "settable_per_mesh": true,
-                    "children":
-                    {
-                        "travel_compensate_overlapping_walls_0_enabled":
-                        {
-                            "label": "Compensate Outer Wall Overlaps",
-                            "description": "Compensate the flow for parts of an outer wall being printed where there is already a wall in place.",
-                            "type": "bool",
-                            "default_value": true,
-                            "value": "travel_compensate_overlapping_walls_enabled",
-                            "limit_to_extruder": "wall_0_extruder_nr",
-                            "settable_per_mesh": true
-                        },
-                        "travel_compensate_overlapping_walls_x_enabled":
-                        {
-                            "label": "Compensate Inner Wall Overlaps",
-                            "description": "Compensate the flow for parts of an inner wall being printed where there is already a wall in place.",
-                            "type": "bool",
-                            "default_value": true,
-                            "value": "travel_compensate_overlapping_walls_enabled",
-                            "limit_to_extruder": "wall_x_extruder_nr",
-                            "settable_per_mesh": true
-                        }
-                    }
-                },
                 "wall_min_flow":
                 {
                     "label": "Minimum Wall Flow",
@@ -1324,7 +1292,6 @@
                     "maximum_value": "100",
                     "default_value": 0,
                     "type": "float",
-                    "enabled": "travel_compensate_overlapping_walls_0_enabled or travel_compensate_overlapping_walls_x_enabled",
                     "settable_per_mesh": true
                 },
                 "wall_min_flow_retract":
@@ -1333,7 +1300,7 @@
                     "description": "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold.",
                     "type": "bool",
                     "default_value": false,
-                    "enabled": "(travel_compensate_overlapping_walls_0_enabled or travel_compensate_overlapping_walls_x_enabled) and wall_min_flow > 0",
+                    "enabled": "wall_min_flow > 0",
                     "settable_per_mesh": true
                 },
                 "fill_perimeter_gaps":

resources/definitions/flyingbear_base.def.json

@@ -48,7 +48,6 @@
 		"wall_0_wipe_dist": 			{ "value": 0.0 },
 		"top_bottom_thickness": 		{ "value":  "layer_height_0 + layer_height * 3 if layer_height > 0.15 else 0.8" },
 		"optimize_wall_printing_order": 	{ "value": true },
-		"travel_compensate_overlapping_walls_0_enabled": { "value": false },
 		"fill_perimeter_gaps": 			{ "value": "'everywhere'" },
 		"filter_out_tiny_gaps": 		{ "value": false },
 		"fill_outline_gaps": 			{ "value": false },

resources/definitions/hms434.def.json

@@ -91,7 +91,6 @@
         "wall_0_inset":              {"value": "0" },
         "outer_inset_first":         {"value": true },
         "alternate_extra_perimeter": {"value": false },
-        "travel_compensate_overlapping_walls_enabled": {"value": false },
         "filter_out_tiny_gaps":      {"value": true },
         "fill_outline_gaps":         {"value": true },
         "z_seam_type":               {"value": "'shortest'"},

resources/definitions/peopoly_moai.def.json

@@ -176,15 +176,6 @@
         "skin_outline_count": {
             "value": 0
         },
-        "travel_compensate_overlapping_walls_enabled": {
-            "value": "False"
-        },
-        "travel_compensate_overlapping_walls_0_enabled": {
-            "value": "False"
-        },
-        "travel_compensate_overlapping_walls_x_enabled": {
-            "value": "False"
-        },
         "wall_0_wipe_dist": {
             "value": "machine_nozzle_size / 3"
         },

resources/definitions/skriware_2.def.json

@@ -107,9 +107,6 @@
         "switch_extruder_retraction_speed": {
             "value": "30"
         },
-        "travel_compensate_overlapping_walls_enabled": {
-            "default_value": false
-        },
         "raft_base_acceleration": {
             "value": "400"
         },
@@ -383,9 +380,6 @@
         "acceleration_support_infill": {
             "value": "400"
         },
-        "travel_compensate_overlapping_walls_0_enabled": {
-            "value": "False"
-        },
         "support_bottom_material_flow": {
             "value": "99"
         },
@@ -638,9 +632,6 @@
         "skirt_line_count": {
             "default_value": 2
         },
-        "travel_compensate_overlapping_walls_x_enabled": {
-            "value": "False"
-        },
         "jerk_wall_0": {
             "value": "10"
         },

resources/definitions/tronxy_x.def.json

@@ -83,7 +83,6 @@
         "material_initial_print_temperature": { "value": "material_print_temperature" },
         "material_final_print_temperature": { "value": "material_print_temperature" },
         "material_flow": { "value": 100 },
-        "travel_compensate_overlapping_walls_0_enabled": { "value": "False" },
 
         "z_seam_type": { "value": "'back'" },
         "z_seam_corner": { "value": "'z_seam_corner_weighted'" },

resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg

@@ -21,9 +21,6 @@ wall_0_wipe_dist = 0.2
 top_bottom_thickness = 0.8
 top_bottom_pattern = lines
 optimize_wall_printing_order = True
-travel_compensate_overlapping_walls_enabled = True
-travel_compensate_overlapping_walls_0_enabled = True
-travel_compensate_overlapping_walls_x_enabled = True
 fill_perimeter_gaps = everywhere
 filter_out_tiny_gaps = True
 z_seam_type = sharpest_corner