Added print profiles normal, high and draft

resources/quality/tinyboy/tinyboy_fabrikator15_draft.inst.cfg

@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = Draft
+definition = tinyboy_fabrikator15
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = draft
+weight = 0
+global_quality = True
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1800
+acceleration_travel = 3000
+adhesion_type = skirt
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.3
+layer_height_0 = 0.3
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 60
+speed_support = 60
+speed_topbottom = =math.ceil(speed_print * 30 / 60)
+speed_travel = 100
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2

resources/quality/tinyboy/tinyboy_fabrikator15_high.inst.cfg

@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = High
+definition = tinyboy_fabrikator15
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = high
+weight = 2
+global_quality = True
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1800
+acceleration_travel = 3000
+adhesion_type = skirt
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.1
+layer_height_0 = 0.1
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 50
+speed_support = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+speed_travel = 50
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2

resources/quality/tinyboy/tinyboy_fabrikator15_normal.inst.cfg

@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = Normal
+definition = tinyboy_fabrikator15
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+weight = 1
+global_quality = True
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1800
+acceleration_travel = 3000
+adhesion_type = skirt
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.2
+layer_height_0 = 0.2
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 210
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 50
+speed_support = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+speed_travel = 100
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2