Fix prime_tower_enable setting use

CURA-11645

resources/definitions/fdmprinter.def.json

@@ -979,7 +979,7 @@
                             "description": "Width of a single prime tower line.",
                             "type": "float",
                             "unit": "mm",
-                            "enabled": "'prime_tower_enable'",
+                            "enabled": "prime_tower_enable",
                             "default_value": 0.4,
                             "value": "line_width",
                             "minimum_value": "0.001",
@@ -3363,7 +3363,7 @@
                             "description": "The speed at which the prime tower is printed. Printing the prime tower slower can make it more stable when the adhesion between the different filaments is suboptimal.",
                             "type": "float",
                             "unit": "mm/s",
-                            "enabled": "'prime_tower_enable'",
+                            "enabled": "prime_tower_enable",
                             "default_value": 60,
                             "value": "speed_print",
                             "minimum_value": "0.1",
@@ -3741,7 +3741,7 @@
                             "maximum_value_warning": "10000",
                             "default_value": 3000,
                             "value": "acceleration_print",
-                            "enabled": "'prime_tower_enable' and resolveOrValue('acceleration_enabled')",
+                            "enabled": "prime_tower_enable and resolveOrValue('acceleration_enabled')",
                             "settable_per_mesh": false
                         }
                     }
@@ -4060,7 +4060,7 @@
                             "maximum_value_warning": "50",
                             "default_value": 20,
                             "value": "jerk_print",
-                            "enabled": "'prime_tower_enable' and resolveOrValue('jerk_enabled')",
+                            "enabled": "prime_tower_enable and resolveOrValue('jerk_enabled')",
                             "settable_per_mesh": false
                         }
                     }
@@ -6827,7 +6827,7 @@
                     "description": "The width of the prime tower.",
                     "type": "float",
                     "unit": "mm",
-                    "enabled": "'prime_tower_enable'",
+                    "enabled": "prime_tower_enable",
                     "default_value": 20,
                     "resolve": "max(extruderValues('prime_tower_size'))",
                     "minimum_value": "0",
@@ -6846,7 +6846,7 @@
                     "default_value": 6,
                     "minimum_value": "0",
                     "maximum_value_warning": "(resolveOrValue('prime_tower_size') * 0.5) ** 2 * 3.14159 * resolveOrValue('layer_height') - sum(extruderValues('prime_tower_min_volume')) + prime_tower_min_volume",
-                    "enabled": "'prime_tower_enable'",
+                    "enabled": "prime_tower_enable",
                     "settable_per_mesh": false,
                     "settable_per_extruder": true
                 },
@@ -6859,7 +6859,7 @@
                     "default_value": 5,
                     "minimum_value": "line_width",
                     "maximum_value_warning": "10.0",
-                    "enabled": "'prime_tower_enable'",
+                    "enabled": "prime_tower_enable",
                     "settable_per_mesh": false,
                     "settable_per_extruder": true
                 },
@@ -6869,7 +6869,7 @@
                     "description": "The x coordinate of the position of the prime tower.",
                     "type": "float",
                     "unit": "mm",
-                    "enabled": "'prime_tower_enable'",
+                    "enabled": "prime_tower_enable",
                     "default_value": 200,
                     "value": "(resolveOrValue('machine_width') / 2 + resolveOrValue('prime_tower_size') / 2) if resolveOrValue('machine_shape') == 'elliptic' else (resolveOrValue('machine_width') - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('machine_nozzle_offset_x')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_x'))), 1)) - (resolveOrValue('machine_width') / 2 if resolveOrValue('machine_center_is_zero') else 0)",
                     "maximum_value": "(machine_width / 2 if machine_center_is_zero else machine_width) - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0)",
@@ -6883,7 +6883,7 @@
                     "description": "The y coordinate of the position of the prime tower.",
                     "type": "float",
                     "unit": "mm",
-                    "enabled": "'prime_tower_enable'",
+                    "enabled": "prime_tower_enable",
                     "default_value": 200,
                     "value": "machine_depth - prime_tower_size - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('machine_nozzle_offset_y')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_y'))), 1) - (resolveOrValue('machine_depth') / 2 if resolveOrValue('machine_center_is_zero') else 0)",
                     "maximum_value": "(machine_depth / 2 - resolveOrValue('prime_tower_size') if machine_center_is_zero else machine_depth - resolveOrValue('prime_tower_size')) - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0)",
@@ -6896,7 +6896,7 @@
                     "label": "Wipe Inactive Nozzle on Prime Tower",
                     "description": "After printing the prime tower with one nozzle, wipe the oozed material from the other nozzle off on the prime tower.",
                     "type": "bool",
-                    "enabled": "'prime_tower_enable'",
+                    "enabled": "prime_tower_enable",
                     "default_value": true,
                     "settable_per_mesh": false,
                     "settable_per_extruder": true
@@ -6907,7 +6907,7 @@
                     "label": "Prime Tower Base",
                     "description": "By enabling this setting, your prime-tower will get a brim, even if the model doesn't. If you want a sturdier base for a high tower, you can increase the base height.",
                     "type": "bool",
-                    "enabled": "'prime_tower_enable' and resolveOrValue('adhesion_type') != 'raft'",
+                    "enabled": "prime_tower_enable and resolveOrValue('adhesion_type') != 'raft'",
                     "default_value": false,
                     "settable_per_mesh": false,
                     "settable_per_extruder": false
@@ -6919,7 +6919,7 @@
                     "description": "The width of the prime tower brim/base. A larger base enhances adhesion to the build plate, but also reduces the effective print area.",
                     "type": "float",
                     "unit": "mm",
-                    "enabled": "'prime_tower_enable' and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')",
+                    "enabled": "prime_tower_enable and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')",
                     "default_value": 1.2,
                     "minimum_value": "0",
                     "maximum_value": "min(0.5 * machine_width, 0.5 * machine_depth)",
@@ -6933,7 +6933,7 @@
                     "description": "The height of the prime tower base. Increasing this value will result in a more sturdy prime tower because the base will be wider. If this setting is too low, the prime tower will not have a sturdy base.",
                     "type": "float",
                     "unit": "mm",
-                    "enabled": "'prime_tower_enable' and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')",
+                    "enabled": "prime_tower_enable and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')",
                     "default_value": 0,
                     "minimum_value": "0",
                     "maximum_value": "machine_height",
@@ -6945,7 +6945,7 @@
                     "label": "Prime Tower Base Slope",
                     "description": "The magnitude factor used for the slope of the prime tower base. If you increase this value, the base will become slimmer. If you decrease it, the base will become thicker.",
                     "type": "float",
-                    "enabled": "'prime_tower_enable' and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')",
+                    "enabled": "prime_tower_enable and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')",
                     "default_value": 4,
                     "minimum_value": "0",
                     "maximum_value": "10",
@@ -6963,7 +6963,7 @@
                     "minimum_value": "0",
                     "minimum_value_warning": "raft_base_line_width",
                     "maximum_value_warning": "100",
-                    "enabled": "'prime_tower_enable' and resolveOrValue('adhesion_type') == 'raft'",
+                    "enabled": "prime_tower_enable and resolveOrValue('adhesion_type') == 'raft'",
                     "settable_per_mesh": false,
                     "settable_per_extruder": true,
                     "limit_to_extruder": "raft_base_extruder_nr"