|
|
@@ -45,11 +45,11 @@
|
|
|
"machine_max_feedrate_y": { "value": 500 },
|
|
|
"machine_max_feedrate_z": { "value": 30 },
|
|
|
"machine_name": { "default_value": "Creality Ender-3 V3 SE" },
|
|
|
- "machine_start_gcode": { "default_value": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\nM420 S1; Enable mesh leveling\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S{material_print_temperature_layer_0}\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800 \n" },
|
|
|
+ "machine_start_gcode": { "default_value": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\nM420 S1; Use saved mesh leveling data\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nM109 S{material_print_temperature_layer_0} ; Set hotend temperature and wait\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800 \n" },
|
|
|
"machine_width": { "default_value": 220 },
|
|
|
"retraction_amount": { "value": 0.8 },
|
|
|
"retraction_speed": { "default_value": 40 },
|
|
|
"speed_layer_0": { "value": 30 },
|
|
|
"speed_print": { "value": 180 }
|
|
|
}
|
|
|
-}
|
|
|
+}
|
sheep007