Update translation templates

These are the translation templates for Cura 3.3.

Contributes to issue CURA-5166.

resources/i18n/fdmextruder.def.json.pot

@@ -5,9 +5,9 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 3.2\n"
+"Project-Id-Version: Cura 3.3\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2017-08-02 16:53+0000\n"
+"POT-Creation-Date: 2018-03-29 08:36+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: TEAM\n"
@@ -207,3 +207,25 @@ msgid ""
 "The Y coordinate of the position where the nozzle primes at the start of "
 "printing."
 msgstr ""
+
+#: fdmextruder.def.json
+msgctxt "material label"
+msgid "Material"
+msgstr ""
+
+#: fdmextruder.def.json
+msgctxt "material description"
+msgid "Material"
+msgstr ""
+
+#: fdmextruder.def.json
+msgctxt "material_diameter label"
+msgid "Diameter"
+msgstr ""
+
+#: fdmextruder.def.json
+msgctxt "material_diameter description"
+msgid ""
+"Adjusts the diameter of the filament used. Match this value with the "
+"diameter of the used filament."
+msgstr ""

resources/i18n/fdmprinter.def.json.pot

@@ -5,9 +5,9 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 3.2\n"
+"Project-Id-Version: Cura 3.3\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2017-08-02 16:53+0000\n"
+"POT-Creation-Date: 2018-03-29 08:36+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: TEAM\n"
@@ -50,25 +50,25 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_start_gcode label"
-msgid "Start GCode"
+msgid "Start G-code"
 msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_start_gcode description"
 msgid ""
-"Gcode commands to be executed at the very start - separated by \n"
+"G-code commands to be executed at the very start - separated by \n"
 "."
 msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_end_gcode label"
-msgid "End GCode"
+msgid "End G-code"
 msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_end_gcode description"
 msgid ""
-"Gcode commands to be executed at the very end - separated by \n"
+"G-code commands to be executed at the very end - separated by \n"
 "."
 msgstr ""
 
@@ -171,6 +171,26 @@ msgctxt "machine_shape option elliptic"
 msgid "Elliptic"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "machine_buildplate_type label"
+msgid "Build Plate Material"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_buildplate_type description"
+msgid "The material of the build plate installed on the printer."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_buildplate_type option glass"
+msgid "Glass"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_buildplate_type option aluminum"
+msgid "Aluminum"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "machine_height label"
 msgid "Machine Height"
@@ -215,6 +235,17 @@ msgid ""
 "bowden tube, and nozzle."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "extruders_enabled_count label"
+msgid "Number of Extruders that are enabled"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "extruders_enabled_count description"
+msgid ""
+"Number of extruder trains that are enabled; automatically set in software"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "machine_nozzle_tip_outer_diameter label"
 msgid "Outer nozzle diameter"
@@ -324,12 +355,12 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_gcode_flavor label"
-msgid "Gcode flavour"
+msgid "G-code flavour"
 msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_gcode_flavor description"
-msgid "The type of gcode to be generated."
+msgid "The type of g-code to be generated."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -617,6 +648,90 @@ msgctxt "machine_max_jerk_e description"
 msgid "Default jerk for the motor of the filament."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "machine_steps_per_mm_x label"
+msgid "Steps per Millimeter (X)"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_steps_per_mm_x description"
+msgid ""
+"How many steps of the stepper motor will result in one millimeter of "
+"movement in the X direction."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_steps_per_mm_y label"
+msgid "Steps per Millimeter (Y)"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_steps_per_mm_y description"
+msgid ""
+"How many steps of the stepper motor will result in one millimeter of "
+"movement in the Y direction."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_steps_per_mm_z label"
+msgid "Steps per Millimeter (Z)"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_steps_per_mm_z description"
+msgid ""
+"How many steps of the stepper motor will result in one millimeter of "
+"movement in the Z direction."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_steps_per_mm_e label"
+msgid "Steps per Millimeter (E)"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_steps_per_mm_e description"
+msgid ""
+"How many steps of the stepper motors will result in one millimeter of "
+"extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_endstop_positive_direction_x label"
+msgid "X Endstop in Positive Direction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_endstop_positive_direction_x description"
+msgid ""
+"Whether the endstop of the X axis is in the positive direction (high X "
+"coordinate) or negative (low X coordinate)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_endstop_positive_direction_y label"
+msgid "Y Endstop in Positive Direction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_endstop_positive_direction_y description"
+msgid ""
+"Whether the endstop of the Y axis is in the positive direction (high Y "
+"coordinate) or negative (low Y coordinate)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_endstop_positive_direction_z label"
+msgid "Z Endstop in Positive Direction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_endstop_positive_direction_z description"
+msgid ""
+"Whether the endstop of the Z axis is in the positive direction (high Z "
+"coordinate) or negative (low Z coordinate)."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "machine_minimum_feedrate label"
 msgid "Minimum Feedrate"
@@ -627,6 +742,16 @@ msgctxt "machine_minimum_feedrate description"
 msgid "The minimal movement speed of the print head."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "machine_feeder_wheel_diameter label"
+msgid "Feeder Wheel Diameter"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_feeder_wheel_diameter description"
+msgid "The diameter of the wheel that drives the material in the feeder."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
@@ -1952,6 +2077,19 @@ msgid ""
 "used to signify the heat up speed lost when heating up while extruding."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "default_material_bed_temperature label"
+msgid "Default Build Plate Temperature"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "default_material_bed_temperature description"
+msgid ""
+"The default temperature used for the heated build plate. This should be the "
+"\"base\" temperature of a build plate. All other print temperatures should "
+"use offsets based on this value"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature label"
 msgid "Build Plate Temperature"
@@ -2006,6 +2144,16 @@ msgctxt "material_surface_energy description"
 msgid "Surface energy."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage label"
+msgid "Shrinkage Ratio"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage description"
+msgid "Shrinkage ratio in percentage."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "material_flow label"
 msgid "Flow"
@@ -2018,6 +2166,18 @@ msgid ""
 "value."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "material_flow_layer_0 label"
+msgid "Initial Layer Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_flow_layer_0 description"
+msgid ""
+"Flow compensation for the first layer: the amount of material extruded on "
+"the initial layer is multiplied by this value."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "retraction_enable label"
 msgid "Enable Retraction"
@@ -3372,6 +3532,19 @@ msgctxt "support_pattern option cross"
 msgid "Cross"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "zig_zaggify_support label"
+msgid "Connect Support Lines"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "zig_zaggify_support description"
+msgid ""
+"Connect the ends of the support lines together. Enabling this setting can "
+"make your support more sturdy and reduce underextrusion, but it will cost "
+"more material."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "support_connect_zigzags label"
 msgid "Connect Support ZigZags"
@@ -4438,6 +4611,16 @@ msgid ""
 "each nozzle switch."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "prime_tower_circular label"
+msgid "Circular Prime Tower"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "prime_tower_circular description"
+msgid "Make the prime tower as a circular shape."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "prime_tower_size label"
 msgid "Prime Tower Size"
@@ -4638,7 +4821,7 @@ msgid ""
 "Normally Cura tries to stitch up small holes in the mesh and remove parts of "
 "a layer with big holes. Enabling this option keeps those parts which cannot "
 "be stitched. This option should be used as a last resort option when "
-"everything else fails to produce proper GCode."
+"everything else fails to produce proper g-code."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -4903,11 +5086,11 @@ msgstr ""
 msgctxt "relative_extrusion description"
 msgid ""
 "Use relative extrusion rather than absolute extrusion. Using relative E-"
-"steps makes for easier post-processing of the Gcode. However, it's not "
+"steps makes for easier post-processing of the g-code. However, it's not "
 "supported by all printers and it may produce very slight deviations in the "
 "amount of deposited material compared to absolute E-steps. Irrespective of "
-"this setting, the extrusion mode will always be set to absolute before any "
-"Gcode script is output."
+"this setting, the extrusion mode will always be set to absolute before any g-"
+"code script is output."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -5929,6 +6112,240 @@ msgid ""
 "the tan of the steepest slope in a layer."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "bridge_settings_enabled label"
+msgid "Enable Bridge Settings"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_settings_enabled description"
+msgid ""
+"Detect bridges and modify print speed, flow and fan settings while bridges "
+"are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_wall_min_length label"
+msgid "Minimum Bridge Wall Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_wall_min_length description"
+msgid ""
+"Unsupported walls shorter than this will be printed using the normal wall "
+"settings. Longer unsupported walls will be printed using the bridge wall "
+"settings."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_support_threshold label"
+msgid "Bridge Skin Support Threshold"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_support_threshold description"
+msgid ""
+"If a skin region is supported for less than this percentage of its area, "
+"print it using the bridge settings. Otherwise it is printed using the normal "
+"skin settings."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_wall_max_overhang label"
+msgid "Bridge Wall Max Overhang"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_wall_max_overhang description"
+msgid ""
+"The maximum allowed width of the region of air below a wall line before the "
+"wall is printed using bridge settings. Expressed as a percentage of the wall "
+"line width. When the air gap is wider than this, the wall line is printed "
+"using the bridge settings. Otherwise, the wall line is printed using the "
+"normal settings. The lower the value, the more likely it is that overhung "
+"wall lines will be printed using bridge settings."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_wall_coast label"
+msgid "Bridge Wall Coasting"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_wall_coast description"
+msgid ""
+"This controls the distance the extruder should coast immediately before a "
+"bridge wall begins. Coasting before the bridge starts can reduce the "
+"pressure in the nozzle and may produce a flatter bridge."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_wall_speed label"
+msgid "Bridge Wall Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_wall_speed description"
+msgid "The speed at which the bridge walls are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_wall_material_flow label"
+msgid "Bridge Wall Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_wall_material_flow description"
+msgid ""
+"When printing bridge walls, the amount of material extruded is multiplied by "
+"this value."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_speed label"
+msgid "Bridge Skin Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_speed description"
+msgid "The speed at which bridge skin regions are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_material_flow label"
+msgid "Bridge Skin Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_material_flow description"
+msgid ""
+"When printing bridge skin regions, the amount of material extruded is "
+"multiplied by this value."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_density label"
+msgid "Bridge Skin Density"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_density description"
+msgid ""
+"The density of the bridge skin layer. Values less than 100 will increase the "
+"gaps between the skin lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_fan_speed label"
+msgid "Bridge Fan Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_fan_speed description"
+msgid "Percentage fan speed to use when printing bridge walls and skin."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_enable_more_layers label"
+msgid "Bridge Has Multiple Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_enable_more_layers description"
+msgid ""
+"If enabled, the second and third layers above the air are printed using the "
+"following settings. Otherwise, those layers are printed using the normal "
+"settings."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_speed_2 label"
+msgid "Bridge Second Skin Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_speed_2 description"
+msgid "Print speed to use when printing the second bridge skin layer."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_material_flow_2 label"
+msgid "Bridge Second Skin Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_material_flow_2 description"
+msgid ""
+"When printing the second bridge skin layer, the amount of material extruded "
+"is multiplied by this value."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_density_2 label"
+msgid "Bridge Second Skin Density"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_density_2 description"
+msgid ""
+"The density of the second bridge skin layer. Values less than 100 will "
+"increase the gaps between the skin lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_fan_speed_2 label"
+msgid "Bridge Second Skin Fan Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_fan_speed_2 description"
+msgid "Percentage fan speed to use when printing the second bridge skin layer."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_speed_3 label"
+msgid "Bridge Third Skin Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_speed_3 description"
+msgid "Print speed to use when printing the third bridge skin layer."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_material_flow_3 label"
+msgid "Bridge Third Skin Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_material_flow_3 description"
+msgid ""
+"When printing the third bridge skin layer, the amount of material extruded "
+"is multiplied by this value."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_density_3 label"
+msgid "Bridge Third Skin Density"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_skin_density_3 description"
+msgid ""
+"The density of the third bridge skin layer. Values less than 100 will "
+"increase the gaps between the skin lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_fan_speed_3 label"
+msgid "Bridge Third Skin Fan Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bridge_fan_speed_3 description"
+msgid "Percentage fan speed to use when printing the third bridge skin layer."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"