Merge remote-tracking branch 'origin/PP-108_Improved_support_settings' into PP-108_Improved_support_settings

# Conflicts:
#	resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg
#	resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg
#	resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
#	resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg
#	resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg
#	resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg
#	resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
#	resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
#	resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
#	resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg

resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg

@@ -58,7 +58,6 @@ speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
 support_z_distance = =layer_height * 2
 support_bottom_distance = =support_z_distance / 2
-support_xy_distance_overhang = =wall_line_width_0
 travel_avoid_distance = 3
 wall_0_inset = 0
 speed_wall_x = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg

@@ -17,7 +17,6 @@ layer_height = 0.4
 material_standby_temperature = 100
 retraction_count_max = 5
 support_brim_enable = True
-support_interface_height = 0.9
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))

resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg

@@ -19,7 +19,6 @@ prime_tower_enable = False
 retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
-support_interface_height = 1.2
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))