Added profiles for PLA / PVA on Method, MethodX and Method XL

PP-475

resources/extruders/ultimaker_method_extruder_left.def.json

@@ -0,0 +1,29 @@
+{
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "ultimaker_method",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 0,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_offset_x": { "default_value": 0 },
+        "machine_nozzle_offset_y": { "default_value": 0 },
+        "machine_extruder_start_code": {
+            "default_value": "G0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000\nM104 S{material_print_temperature}\nG4 S5\nG91\nG0 Z-0.4 F600\nG90\nM107 P{(extruder_nr+1)%2}\nM106 P{extruder_nr} S{cool_fan_speed_0/100}"
+        },
+        "machine_extruder_end_code": {
+            "default_value": "M106 P{extruder_nr} S1.0\nG91\nG0 Z0.4 F600\nG90\nG0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000"
+        },
+        "machine_extruder_start_code_duration": {
+            "default_value":8
+        }
+    }
+}

resources/extruders/ultimaker_method_extruder_right.def.json

@@ -0,0 +1,29 @@
+{
+    "version": 2,
+    "name": "Extruder 2",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "ultimaker_method",
+        "position": "1"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 1,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_offset_x": { "default_value": 0 },
+        "machine_nozzle_offset_y": { "default_value": 0 },
+        "machine_extruder_start_code": {
+            "default_value": "G0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000\nM104 S{material_print_temperature}\nG4 S5\nG91\nG0 Z-0.4 F600\nG90\nM107 P{(extruder_nr+1)%2}\nM106 P{extruder_nr} S{cool_fan_speed_0/100}"
+        },
+        "machine_extruder_end_code": {
+            "default_value": "M106 P{extruder_nr} S1.0\nG91\nG0 Z0.4 F600\nG90\nG0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000"
+        },
+        "machine_extruder_start_code_duration": {
+            "default_value":8
+        }
+    }
+}

resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1A
+material = ultimaker_pla_175
+quality_type = draft
+intent_category = solid
+type = intent
+
+[values]
+build_volume_temperature = 47
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1C
+material = ultimaker_pla_175
+quality_type = draft
+intent_category = solid
+type = intent
+
+[values]
+build_volume_temperature = 47
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+setting_version = 23
+variant = LABS
+material = ultimaker_pla_175
+quality_type = draft
+intent_category = solid
+type = intent
+
+[values]
+build_volume_temperature = 47
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,19 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1A
+material = ultimaker_pla_175
+quality_type = draft
+intent_category = solid
+type = intent
+
+[values]
+build_plate_temperature = 45
+build_volume_temperature = 45
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,19 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1C
+material = ultimaker_pla_175
+quality_type = draft
+intent_category = solid
+type = intent
+
+[values]
+build_plate_temperature = 45
+build_volume_temperature = 45
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,19 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+setting_version = 23
+variant = LABS
+material = ultimaker_pla_175
+quality_type = draft
+intent_category = solid
+type = intent
+
+[values]
+build_plate_temperature = 45
+build_volume_temperature = 45
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/quality/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm.inst.cfg

@@ -0,0 +1,84 @@
+[general]
+definition = ultimaker_methodx
+name = Fast
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1A
+material = ultimaker_pla_175
+quality_type = draft
+type = quality
+weight = -2
+
+[values]
+bottom_layers = 4
+cool_fan_enabled = True
+cool_fan_full_layer = 4
+cool_fan_speed = 100
+cool_fan_speed_0 = 0
+cool_min_layer_time = 10
+cool_min_speed = 5
+cool_min_temperature = 205
+infill_sparse_density = 15
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_print_temperature = 210
+material_print_temperature_layer_0 = 225
+material_standby_temperature = 160
+min_bead_width = =line_width * 0.75
+min_wall_line_width = =line_width * 0.75
+raft_airgap = 0.18
+raft_base_line_spacing = 4
+raft_base_line_width = 1.2
+raft_base_speed = =raft_speed
+raft_base_thickness = 0.6
+raft_interface_fan_speed = 0
+raft_interface_layers = 1
+raft_interface_line_spacing = 0.75
+raft_interface_speed = 60
+raft_interface_thickness = 0.2
+raft_speed = 30
+raft_surface_fan_speed = 0
+raft_surface_line_spacing = 0.425
+raft_surface_speed = 90
+raft_surface_wall_count = 2
+retract_at_layer_change = True
+skin_material_flow_layer_0 = =material_flow
+speed_layer_0 = 15
+speed_print = 150
+speed_roofing = =speed_print / 3
+speed_support = =speed_print
+speed_support_interface = 65
+speed_topbottom = =speed_print * 0.6
+speed_wall = =speed_print / 6
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+support_angle = 50.0
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_fan_enable = True
+support_infill_angles = [45 ]
+support_infill_rate = 12
+support_infill_sparse_thickness = =layer_height
+support_interface_density = 83
+support_interface_height = =layer_height * 4
+support_interface_material_flow = =material_flow * 0.9
+support_interface_offset = 1
+support_interface_wall_count = 0
+support_line_width = line_width * 0.75
+support_material_flow = =material_flow * 0.8
+support_offset = 3
+support_roof_density = =support_interface_density
+support_roof_height = =layer_height * 4
+support_roof_line_width = =line_width
+support_roof_material_flow = =support_interface_material_flow
+support_roof_wall_count = 1
+support_xy_distance = 0.3
+support_xy_distance_overhang = 0.1
+support_xy_overrides_z = xy_overrides_z
+support_z_distance = 0.15
+switch_extruder_retraction_amount = 0.5
+wall_0_material_flow_layer_0 = =material_flow
+wall_x_material_flow_layer_0 = =material_flow
+

resources/quality/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm.inst.cfg

@@ -0,0 +1,84 @@
+[general]
+definition = ultimaker_methodx
+name = Fast
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1C
+material = ultimaker_pla_175
+quality_type = draft
+type = quality
+weight = -2
+
+[values]
+bottom_layers = 4
+cool_fan_enabled = True
+cool_fan_full_layer = 4
+cool_fan_speed = 100
+cool_fan_speed_0 = 0
+cool_min_layer_time = 10
+cool_min_speed = 5
+cool_min_temperature = 205
+infill_sparse_density = 15
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_print_temperature = 210
+material_print_temperature_layer_0 = 225
+material_standby_temperature = 160
+min_bead_width = =line_width * 0.75
+min_wall_line_width = =line_width * 0.75
+raft_airgap = 0.18
+raft_base_line_spacing = 4
+raft_base_line_width = 1.2
+raft_base_speed = =raft_speed
+raft_base_thickness = 0.6
+raft_interface_fan_speed = 0
+raft_interface_layers = 1
+raft_interface_line_spacing = 0.75
+raft_interface_speed = 60
+raft_interface_thickness = 0.2
+raft_speed = 30
+raft_surface_fan_speed = 0
+raft_surface_line_spacing = 0.425
+raft_surface_speed = 90
+raft_surface_wall_count = 2
+retract_at_layer_change = True
+skin_material_flow_layer_0 = =material_flow
+speed_layer_0 = 15
+speed_print = 150
+speed_roofing = =speed_print / 3
+speed_support = =speed_print
+speed_support_interface = 65
+speed_topbottom = =speed_print * 0.6
+speed_wall = =speed_print / 6
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+support_angle = 50.0
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_fan_enable = True
+support_infill_angles = [45 ]
+support_infill_rate = 12
+support_infill_sparse_thickness = =layer_height
+support_interface_density = 83
+support_interface_height = =layer_height * 4
+support_interface_material_flow = =material_flow * 0.9
+support_interface_offset = 1
+support_interface_wall_count = 0
+support_line_width = line_width * 0.75
+support_material_flow = =material_flow * 0.8
+support_offset = 3
+support_roof_density = =support_interface_density
+support_roof_height = =layer_height * 4
+support_roof_line_width = =line_width
+support_roof_material_flow = =support_interface_material_flow
+support_roof_wall_count = 1
+support_xy_distance = 0.3
+support_xy_distance_overhang = 0.1
+support_xy_overrides_z = xy_overrides_z
+support_z_distance = 0.15
+switch_extruder_retraction_amount = 0.5
+wall_0_material_flow_layer_0 = =material_flow
+wall_x_material_flow_layer_0 = =material_flow
+