Applied printer-linter format

resources/definitions/anycubic_kobra_go.def.json

@@ -2,42 +2,28 @@
     "version": 2,
     "name": "Anycubic Kobra Go",
     "inherits": "fdmprinter",
-    "metadata": {
+    "metadata":
+    {
         "visible": true,
         "author": "Kolja Lampe",
         "manufacturer": "Anycubic",
         "file_formats": "text/x-gcode",
+        "firmware_file": "MarlinChiron.hex",
+        "has_machine_quality": true,
         "has_materials": true,
+        "machine_extruder_trains": { "0": "anycubic_kobra_go_extruder_0" },
         "preferred_material": "generic_pla",
-        "has_machine_quality": true,
-        "quality_definition": "anycubic_kobra_go",
         "preferred_quality_type": "pla",
-        "machine_extruder_trains": {
-            "0": "anycubic_kobra_go_extruder_0"
-        },
-        "firmware_file": "MarlinChiron.hex"
+        "quality_definition": "anycubic_kobra_go"
     },
-    "overrides": {
-        "machine_name": {
-            "default_value": "Anycubic Kobra Go"
-        },
-        "machine_heated_bed": {
-            "default_value": true
-        },
-        "machine_width": {
-            "default_value": 222
-        },
-        "machine_height": {
-            "default_value": 250
-        },
-        "machine_depth": {
-            "default_value": 222
-        },
-        "machine_start_gcode": {
-            "default_value": "M140 S[first_layer_bed_temperature]; Heat bed\nM104 S[first_layer_temperature\n            ]; Heat extruder\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG28 ; Home all axes\nG92 E0 ; Reset Extruder\nM420 S1 ; Enable Bed Levelling Mesh\nM190 S[first_layer_bed_temperature\n            ]; Wait for bed to get up to temperature\nM109 S[first_layer_temperature\n            ]; Wait for extruder to get up to temperature\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X2 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X2 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X2.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X2.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 F2400 E-1\nG1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish"
-        },
-        "machine_end_gcode": {
-            "default_value": "M400 ; Wait for current moves to finish\nM220 S100 ; Reset Speed factor override percentage to default (100%)\nM221 S100 ; Reset Extrude factor override percentage to default (100%)\nG91 ; Set coordinates to relative\nG1 F2400 E-1 ; Retract filament 3mm at 40mm/s to prevent stringing\nG0 F5000 Z20 ; Move Z Axis up 20mm to allow filament ooze freely\nG90 ; Set coordinates to absolute\nG0 X0 Y220 F5000 ; Move Heat Bed to the front for easy print removal\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; Disable stepper motors\n; End of custom end GCode"
-        }
+    "overrides":
+    {
+        "machine_depth": { "default_value": 222 },
+        "machine_end_gcode": { "default_value": "M400 ; Wait for current moves to finish\nM220 S100 ; Reset Speed factor override percentage to default (100%)\nM221 S100 ; Reset Extrude factor override percentage to default (100%)\nG91 ; Set coordinates to relative\nG1 F2400 E-1 ; Retract filament 3mm at 40mm/s to prevent stringing\nG0 F5000 Z20 ; Move Z Axis up 20mm to allow filament ooze freely\nG90 ; Set coordinates to absolute\nG0 X0 Y220 F5000 ; Move Heat Bed to the front for easy print removal\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; Disable stepper motors\n; End of custom end GCode" },
+        "machine_heated_bed": { "default_value": true },
+        "machine_height": { "default_value": 250 },
+        "machine_name": { "default_value": "Anycubic Kobra Go" },
+        "machine_start_gcode": { "default_value": "M140 S[first_layer_bed_temperature]; Heat bed\nM104 S[first_layer_temperature\n            ]; Heat extruder\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG28 ; Home all axes\nG92 E0 ; Reset Extruder\nM420 S1 ; Enable Bed Levelling Mesh\nM190 S[first_layer_bed_temperature\n            ]; Wait for bed to get up to temperature\nM109 S[first_layer_temperature\n            ]; Wait for extruder to get up to temperature\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X2 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X2 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X2.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X2.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 F2400 E-1\nG1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish" },
+        "machine_width": { "default_value": 222 }
     }
 }

resources/extruders/anycubic_kobra_go_extruder_0.def.json

@@ -2,16 +2,14 @@
     "version": 2,
     "name": "Extruder 1",
     "inherits": "fdmextruder",
-    "metadata": {
+    "metadata":
+    {
         "machine": "anycubic_kobra_go",
         "position": "0"
     },
-    "overrides": {
-        "extruder_nr": {
-            "default_value": 0
-        },
-        "material_diameter": {
-            "default_value": 1.75
-        }
+    "overrides":
+    {
+        "extruder_nr": { "default_value": 0 },
+        "material_diameter": { "default_value": 1.75 }
     }
 }

resources/quality/anycubic_kobra_go/anycubic_kobra_go_abs.inst.cfg

@@ -1,15 +1,15 @@
 [general]
-version = 4
-name = Normal
 definition = anycubic_kobra_go
+name = Normal
+version = 4
 
 [metadata]
+global_quality = True
+material = generic_abs
+quality_type = abs
 setting_version = 20
 type = quality
-quality_type = abs
 weight = 0
-global_quality = True
-material = generic_abs
 
 [values]
 acceleration_print = 1000.0
@@ -18,6 +18,8 @@ bottom_layers = 6
 brim_width = 4.0
 infill_pattern = lines
 infill_sparse_density = 25
+inset_direction = ='outside_in' if (True) else 'inside_out'
+layer_height = 0.2
 material_final_print_temperature = 230
 material_initial_print_temperature = 230
 material_print_temperature = 235.0
@@ -29,5 +31,3 @@ z_seam_corner = z_seam_corner_inner
 z_seam_type = sharpest_corner
 z_seam_x = 111
 
-inset_direction = ='outside_in' if (True) else 'inside_out'
-layer_height = 0.2

resources/quality/anycubic_kobra_go/anycubic_kobra_go_pla.inst.cfg

@@ -1,21 +1,23 @@
 [general]
-version = 4
-name = Normal
 definition = anycubic_kobra_go
+name = Normal
+version = 4
 
 [metadata]
+global_quality = True
+material = generic_pla
+quality_type = pla
 setting_version = 20
 type = quality
-quality_type = pla
 weight = -2
-global_quality = True
-material = generic_pla
 
 [values]
 bottom_layers = 6
 brim_width = 7.0
 infill_pattern = lines
 infill_sparse_density = 15
+inset_direction = ='outside_in' if (True) else 'inside_out'
+layer_height = 0.2
 material_final_print_temperature = 185
 material_initial_print_temperature = 185
 material_print_temperature = 190
@@ -26,5 +28,3 @@ z_seam_corner = z_seam_corner_any
 z_seam_type = sharpest_corner
 z_seam_x = 111
 
-inset_direction = ='outside_in' if (True) else 'inside_out'
-layer_height = 0.2

resources/quality/anycubic_kobra_go/anycubic_kobra_go_tpu.inst.cfg

@@ -1,15 +1,15 @@
 [general]
-version = 4
-name = Normal
 definition = anycubic_kobra_go
+name = Normal
+version = 4
 
 [metadata]
+global_quality = True
+material = generic_tpu
+quality_type = tpu
 setting_version = 20
 type = quality
-quality_type = tpu
 weight = 1
-global_quality = True
-material = generic_tpu
 
 [values]
 acceleration_print = 1000.0
@@ -18,6 +18,8 @@ bottom_layers = 6
 brim_width = 7.0
 infill_pattern = lines
 infill_sparse_density = 15
+inset_direction = ='outside_in' if (False) else 'inside_out'
+layer_height = 0.2
 material_final_print_temperature = 190
 material_initial_print_temperature = 190
 material_print_temperature = 190
@@ -31,5 +33,3 @@ z_seam_corner = z_seam_corner_inner
 z_seam_type = sharpest_corner
 z_seam_x = 111
 
-inset_direction = ='outside_in' if (False) else 'inside_out'
-layer_height = 0.2