Adding_08_Nozzle_&_fine_tuning_profiles

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_HIPS_A.inst.cfg

@@ -38,10 +38,12 @@ retraction_extra_prime_amount = 0.1
 retraction_min_travel = =3*line_width
 retraction_hop_only_when_collides = True
 skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
 support_z_distance = =layer_height-layer_height
 support_bottom_distance = =support_z_distance
-support_xy_distance = =line_width*3/4
-support_xy_distance_overhang = =line_width*0.175/line_width
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
 support_offset = 3
 support_pattern = grid
 support_interface_density = 100

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_HIPS_B.inst.cfg

@@ -38,10 +38,12 @@ retraction_extra_prime_amount = 0.1
 retraction_min_travel = =3*line_width
 retraction_hop_only_when_collides = True
 skin_overlap = 15
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
 support_z_distance = =layer_height-layer_height
 support_bottom_distance = =support_z_distance
-support_xy_distance = =line_width*3/4
-support_xy_distance_overhang = ==line_width*0.175/line_width
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
 support_offset = 3
 support_pattern = grid
 support_interface_density = 100

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_HIPS_C.inst.cfg

@@ -28,7 +28,7 @@ cool_fan_speed = 50
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
-cool_fan_full_at_height = =layer_height_0 + 19 * layer_height
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_min_speed = 10
 support_angle = 55
 material_print_temperature = =default_material_print_temperature + 5
@@ -38,10 +38,12 @@ retraction_extra_prime_amount = 0.1
 retraction_min_travel = =3*line_width
 retraction_hop_only_when_collides = True
 skin_overlap = 20
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
 support_z_distance = =layer_height-layer_height
 support_bottom_distance = =support_z_distance
-support_xy_distance = =line_width*3/4
-support_xy_distance_overhang = =line_width*0.175/line_width
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
 support_offset = 3
 support_pattern = grid
 support_interface_density = 100

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg

@@ -28,20 +28,22 @@ cool_fan_speed = 50
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
 cool_min_speed = 10
-support_angle = 65
+support_angle = 55
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature
-material_flow = 95
+material_flow = 97
 retraction_extra_prime_amount = 0.1
 retraction_min_travel = =3*line_width
 retraction_hop_only_when_collides = True
 skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
 support_z_distance = =layer_height-layer_height
 support_bottom_distance = =support_z_distance
-support_xy_distance = =line_width*3/4
-support_xy_distance_overhang = =line_width*0.175/line_width
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
 support_offset = 3
 support_pattern = grid
 support_interface_density = 100

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg

@@ -28,20 +28,22 @@ cool_fan_speed = 50
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
 cool_min_speed = 10
-support_angle = 60
+support_angle = 55
 material_print_temperature = =default_material_print_temperature + 3
 material_print_temperature_layer_0 = =default_material_print_temperature
-material_flow = 95
+material_flow = 97
 retraction_extra_prime_amount = 0.1
 retraction_min_travel = =3*line_width
 retraction_hop_only_when_collides = True
 skin_overlap = 15
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
 support_z_distance = =layer_height-layer_height
 support_bottom_distance = =support_z_distance
-support_xy_distance = =line_width*3/4
-support_xy_distance_overhang = =line_width*0.175/line_width
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
 support_offset = 3
 support_pattern = grid
 support_interface_density = 100

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg

@@ -33,15 +33,17 @@ cool_min_speed = 10
 support_angle = 55
 material_print_temperature = =default_material_print_temperature + 5
 material_print_temperature_layer_0 = =default_material_print_temperature
-material_flow = 95
+material_flow = 97
 retraction_extra_prime_amount = 0.1
 retraction_min_travel = =3*line_width
 retraction_hop_only_when_collides = True
 skin_overlap = 20
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
 support_z_distance = =layer_height-layer_height
 support_bottom_distance = =support_z_distance
-support_xy_distance = =line_width*3/4
-support_xy_distance_overhang = =line_width*0.175/line_width
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
 support_offset = 3
 support_pattern = grid
 support_interface_density = 100

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg

@@ -28,20 +28,22 @@ cool_fan_speed = 50
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
 cool_min_speed = 10
-support_angle = 65
+support_angle = 55
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature
-material_flow = 95
+material_flow = 97
 retraction_extra_prime_amount = 0.1
 retraction_min_travel = =3*line_width
 retraction_hop_only_when_collides = True
 skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
 support_z_distance = =layer_height-layer_height
 support_bottom_distance = =support_z_distance
-support_xy_distance = =line_width*3/4
-support_xy_distance_overhang = =line_width*0.175/line_width
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
 support_offset = 3
 support_pattern = grid
 support_interface_density = 100

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg

@@ -28,20 +28,22 @@ cool_fan_speed = 50
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
 cool_min_speed = 10
-support_angle = 60
+support_angle = 55
 material_print_temperature = =default_material_print_temperature + 3
 material_print_temperature_layer_0 = =default_material_print_temperature
-material_flow = 95
+material_flow = 97
 retraction_extra_prime_amount = 0.1
 retraction_min_travel = =3*line_width
 retraction_hop_only_when_collides = True
 skin_overlap = 15
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
 support_z_distance = =layer_height-layer_height
 support_bottom_distance = =support_z_distance
-support_xy_distance = =line_width*3/4
-support_xy_distance_overhang = ==line_width*0.175/line_width
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
 support_offset = 3
 support_pattern = grid
 support_interface_density = 100

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg

@@ -33,15 +33,17 @@ cool_min_speed = 10
 support_angle = 55
 material_print_temperature = =default_material_print_temperature + 5
 material_print_temperature_layer_0 = =default_material_print_temperature
-material_flow = 95
+material_flow = 97
 retraction_extra_prime_amount = 0.1
 retraction_min_travel = =3*line_width
 retraction_hop_only_when_collides = True
 skin_overlap = 20
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
 support_z_distance = =layer_height-layer_height
 support_bottom_distance = =support_z_distance
-support_xy_distance = =line_width*3/4
-support_xy_distance_overhang = =line_width*0.175/line_width
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
 support_offset = 3
 support_pattern = grid
 support_interface_density = 100

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg

@@ -28,20 +28,22 @@ cool_fan_speed = 50
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
 cool_min_speed = 10
-support_angle = 65
+support_angle = 55
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature
-material_flow = 95
+material_flow = 97
 retraction_extra_prime_amount = 0.1
 retraction_min_travel = =3*line_width
 retraction_hop_only_when_collides = True
 skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
 support_z_distance = =layer_height-layer_height
 support_bottom_distance = =support_z_distance
-support_xy_distance = =line_width*3/4
-support_xy_distance_overhang = =line_width*0.175/line_width
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
 support_offset = 3
 support_pattern = grid
 support_interface_density = 100