Removed unneeded calls to extruder value

CURA-3738

resources/definitions/fdmprinter.def.json

@@ -1953,7 +1953,7 @@
                                     "minimum_value": "0.1",
                                     "maximum_value": "math.sqrt(machine_max_feedrate_x ** 2 + machine_max_feedrate_y ** 2)",
                                     "maximum_value_warning": "150",
-                                    "enabled": "extruderValue(support_interface_extruder_nr, 'support_interface_enable') and support_enable",
+                                    "enabled": "support_interface_enable and support_enable",
                                     "limit_to_extruder": "support_interface_extruder_nr",
                                     "value": "speed_support / 1.5",
                                     "settable_per_mesh": false,
@@ -1970,7 +1970,7 @@
                                             "minimum_value": "0.1",
                                             "maximum_value": "math.sqrt(machine_max_feedrate_x ** 2 + machine_max_feedrate_y ** 2)",
                                             "maximum_value_warning": "150",
-                                            "enabled": "extruderValue(support_roof_extruder_nr, 'support_roof_enable') and support_enable",
+                                            "enabled": "support_roof_enable and support_enable",
                                             "limit_to_extruder": "support_roof_extruder_nr",
                                             "value": "speed_support_interface",
                                             "settable_per_mesh": false,
@@ -1986,7 +1986,7 @@
                                             "minimum_value": "0.1",
                                             "maximum_value": "math.sqrt(machine_max_feedrate_x ** 2 + machine_max_feedrate_y ** 2)",
                                             "maximum_value_warning": "150",
-                                            "enabled": "extruderValue(support_bottom_extruder_nr, 'support_bottom_enable') and support_enable",
+                                            "enabled": "support_bottom_enable and support_enable",
                                             "limit_to_extruder": "support_bottom_extruder_nr",
                                             "value": "speed_support_interface",
                                             "settable_per_mesh": false,
@@ -2275,7 +2275,7 @@
                                     "minimum_value": "0.1",
                                     "minimum_value_warning": "100",
                                     "maximum_value_warning": "10000",
-                                    "enabled": "resolveOrValue('acceleration_enabled') and extruderValue(support_interface_extruder_nr, 'support_interface_enable') and support_enable",
+                                    "enabled": "resolveOrValue('acceleration_enabled') and support_interface_enable and support_enable",
                                     "limit_to_extruder": "support_interface_extruder_nr",
                                     "settable_per_mesh": false,
                                     "settable_per_extruder": true,
@@ -2292,7 +2292,7 @@
                                             "minimum_value": "0.1",
                                             "minimum_value_warning": "100",
                                             "maximum_value_warning": "10000",
-                                            "enabled": "resolveOrValue('acceleration_enabled') and extruderValue(support_roof_extruder_nr, 'support_roof_enable') and support_enable",
+                                            "enabled": "resolveOrValue('acceleration_enabled') and support_roof_enable and support_enable",
                                             "limit_to_extruder": "support_roof_extruder_nr",
                                             "settable_per_mesh": false,
                                             "settable_per_extruder": true
@@ -2308,7 +2308,7 @@
                                             "minimum_value": "0.1",
                                             "minimum_value_warning": "100",
                                             "maximum_value_warning": "10000",
-                                            "enabled": "resolveOrValue('acceleration_enabled') and extruderValue(support_bottom_extruder_nr, 'support_bottom_enable') and support_enable",
+                                            "enabled": "resolveOrValue('acceleration_enabled') and support_bottom_enable and support_enable",
                                             "limit_to_extruder": "support_bottom_extruder_nr",
                                             "settable_per_mesh": false,
                                             "settable_per_extruder": true
@@ -2540,7 +2540,7 @@
                                     "value": "jerk_support",
                                     "minimum_value": "0.1",
                                     "maximum_value_warning": "50",
-                                    "enabled": "resolveOrValue('jerk_enabled') and extruderValue(support_interface_extruder_nr, 'support_interface_enable') and support_enable",
+                                    "enabled": "resolveOrValue('jerk_enabled') and support_interface_enable and support_enable",
                                     "limit_to_extruder": "support_interface_extruder_nr",
                                     "settable_per_mesh": false,
                                     "settable_per_extruder": true,
@@ -2556,7 +2556,7 @@
                                             "value": "jerk_support_interface",
                                             "minimum_value": "0.1",
                                             "maximum_value_warning": "50",
-                                            "enabled": "resolveOrValue('jerk_enabled') and extruderValue(support_roof_extruder_nr, 'support_roof_enable') and support_enable",
+                                            "enabled": "resolveOrValue('jerk_enabled') and support_roof_enable and support_enable",
                                             "limit_to_extruder": "support_roof_extruder_nr",
                                             "settable_per_mesh": false,
                                             "settable_per_extruder": true
@@ -2571,7 +2571,7 @@
                                             "value": "jerk_support_interface",
                                             "minimum_value": "0.1",
                                             "maximum_value_warning": "50",
-                                            "enabled": "resolveOrValue('jerk_enabled') and extruderValue(support_bottom_extruder_nr, 'support_bottom_enable') and support_enable",
+                                            "enabled": "resolveOrValue('jerk_enabled') and support_bottom_enable and support_enable",
                                             "limit_to_extruder": "support_bottom_extruder_nr",
                                             "settable_per_mesh": false,
                                             "settable_per_extruder": true
@@ -3330,9 +3330,9 @@
                             "minimum_value": "0",
                             "minimum_value_warning": "0.2 + layer_height",
                             "maximum_value_warning": "10",
-                            "value": "extruderValue(support_roof_extruder_nr, 'support_interface_height')",
+                            "value": "support_interface_height",
                             "limit_to_extruder": "support_roof_extruder_nr",
-                            "enabled": "extruderValue(support_roof_extruder_nr, 'support_roof_enable') and support_enable",
+                            "enabled": "support_roof_enable and support_enable",
                             "settable_per_mesh": true
                         },
                         "support_bottom_height":
@@ -3342,12 +3342,12 @@
                             "unit": "mm",
                             "type": "float",
                             "default_value": 1,
-                            "value": "extruderValue(support_bottom_extruder_nr, 'support_interface_height')",
+                            "value": "support_interface_height",
                             "minimum_value": "0",
-                            "minimum_value_warning": "min(0.2 + layer_height, extruderValue(support_bottom_extruder_nr, 'support_bottom_stair_step_height'))",
+                            "minimum_value_warning": "min(0.2 + layer_height, support_bottom_stair_step_height)",
                             "maximum_value_warning": "10",
                             "limit_to_extruder": "support_bottom_extruder_nr",
-                            "enabled": "extruderValue(support_bottom_extruder_nr, 'support_bottom_enable') and support_enable",
+                            "enabled": "support_bottom_enable and support_enable",
                             "settable_per_mesh": true
                         }
                     }
@@ -3785,7 +3785,7 @@
                     "value": "resolveOrValue('layer_height')",
                     "minimum_value": "0.001",
                     "minimum_value_warning": "0.04",
-                    "maximum_value_warning": "0.75 * extruderValue(adhesion_extruder_nr, 'machine_nozzle_size')",
+                    "maximum_value_warning": "0.75 * machine_nozzle_size",
                     "enabled": "resolveOrValue('adhesion_type') == 'raft'",
                     "settable_per_mesh": false,
                     "settable_per_extruder": true,
@@ -3800,8 +3800,8 @@
                     "default_value": 0.4,
                     "value": "line_width",
                     "minimum_value": "0.001",
-                    "minimum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 0.1",
-                    "maximum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 2",
+                    "minimum_value_warning": "machine_nozzle_size * 0.1",
+                    "maximum_value_warning": "machine_nozzle_size * 2",
                     "enabled": "resolveOrValue('adhesion_type') == 'raft'",
                     "settable_per_mesh": false,
                     "settable_per_extruder": true,
@@ -3815,8 +3815,8 @@
                     "type": "float",
                     "default_value": 0.4,
                     "minimum_value": "0",
-                    "minimum_value_warning": "extruderValue(adhesion_extruder_nr, 'raft_surface_line_width')",
-                    "maximum_value_warning": "extruderValue(adhesion_extruder_nr, 'raft_surface_line_width') * 3",
+                    "minimum_value_warning": "raft_surface_line_width",
+                    "maximum_value_warning": "raft_surface_line_width * 3",
                     "enabled": "resolveOrValue('adhesion_type') == 'raft'",
                     "value": "raft_surface_line_width",
                     "settable_per_mesh": false,
@@ -3833,7 +3833,7 @@
                     "value": "resolveOrValue('layer_height') * 1.5",
                     "minimum_value": "0.001",
                     "minimum_value_warning": "0.04",
-                    "maximum_value_warning": "0.75 * extruderValue(adhesion_extruder_nr, 'machine_nozzle_size')",
+                    "maximum_value_warning": "0.75 * machine_nozzle_size",
                     "enabled": "resolveOrValue('adhesion_type') == 'raft'",
                     "settable_per_mesh": false,
                     "settable_per_extruder": true,
@@ -3848,8 +3848,8 @@
                     "default_value": 0.7,
                     "value": "line_width * 2",
                     "minimum_value": "0.001",
-                    "minimum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 0.5",
-                    "maximum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 3",
+                    "minimum_value_warning": "machine_nozzle_size * 0.5",
+                    "maximum_value_warning": "machine_nozzle_size * 3",
                     "enabled": "resolveOrValue('adhesion_type') == 'raft'",
                     "settable_per_mesh": false,
                     "settable_per_extruder": true,
@@ -3864,7 +3864,7 @@
                     "default_value": 0.9,
                     "value": "raft_interface_line_width + 0.2",
                     "minimum_value": "0",
-                    "minimum_value_warning": "extruderValue(adhesion_extruder_nr, 'raft_interface_line_width')",
+                    "minimum_value_warning": "raft_interface_line_width",
                     "maximum_value_warning": "15.0",
                     "enabled": "resolveOrValue('adhesion_type') == 'raft'",
                     "settable_per_mesh": false,
@@ -3881,7 +3881,7 @@
                     "value": "resolveOrValue('layer_height_0') * 1.2",
                     "minimum_value": "0.001",
                     "minimum_value_warning": "0.04",
-                    "maximum_value_warning": "0.75 * extruderValue(adhesion_extruder_nr, 'raft_base_line_width')",
+                    "maximum_value_warning": "0.75 * raft_base_line_width",
                     "enabled": "resolveOrValue('adhesion_type') == 'raft'",
                     "settable_per_mesh": false,
                     "settable_per_extruder": true,
@@ -3895,9 +3895,9 @@
                     "type": "float",
                     "default_value": 0.8,
                     "minimum_value": "0.001",
-                    "value": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 2",
-                    "minimum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 0.5",
-                    "maximum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 3",
+                    "value": "machine_nozzle_size * 2",
+                    "minimum_value_warning": "machine_nozzle_size * 0.5",
+                    "maximum_value_warning": "machine_nozzle_size * 3",
                     "enabled": "resolveOrValue('adhesion_type') == 'raft'",
                     "settable_per_mesh": false,
                     "settable_per_extruder": true,