Increase bridging flowrate on AA 0.8 at 0.2 layers

resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg

@@ -24,8 +24,10 @@ acceleration_topbottom = =acceleration_wall
 acceleration_wall = =acceleration_infill
 acceleration_wall_0 = 1500
 acceleration_wall_x = =acceleration_wall
+bridge_skin_material_flow = 200
 bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = 200
 bridge_wall_speed = 30
 cool_min_layer_time = 4
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'

resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg

@@ -24,8 +24,10 @@ acceleration_topbottom = =acceleration_wall
 acceleration_wall = =acceleration_infill
 acceleration_wall_0 = 1500
 acceleration_wall_x = =acceleration_wall
+bridge_skin_material_flow = 200
 bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = 200
 bridge_wall_speed = 30
 cool_min_layer_time = 6
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'

resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg

@@ -24,8 +24,10 @@ acceleration_topbottom = =acceleration_wall
 acceleration_wall = =acceleration_infill
 acceleration_wall_0 = 1500
 acceleration_wall_x = =acceleration_wall
+bridge_skin_material_flow = 200
 bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = 200
 bridge_wall_speed = 30
 cool_min_layer_time = 6
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'

resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg

@@ -24,8 +24,10 @@ acceleration_topbottom = =acceleration_wall
 acceleration_wall = =acceleration_infill
 acceleration_wall_0 = 1500
 acceleration_wall_x = =acceleration_wall
+bridge_skin_material_flow = 200
 bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = 200
 bridge_wall_speed = 30
 cool_min_layer_time = 4
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'

resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg

@@ -24,8 +24,10 @@ acceleration_topbottom = =acceleration_wall
 acceleration_wall = =acceleration_infill
 acceleration_wall_0 = 1500
 acceleration_wall_x = =acceleration_wall
+bridge_skin_material_flow = 200
 bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = 200
 bridge_wall_speed = 30
 cool_min_layer_time = 6
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'

resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg

@@ -24,8 +24,10 @@ acceleration_topbottom = =acceleration_wall
 acceleration_wall = =acceleration_infill
 acceleration_wall_0 = 1500
 acceleration_wall_x = =acceleration_wall
+bridge_skin_material_flow = 200
 bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = 200
 bridge_wall_speed = 30
 cool_min_layer_time = 6
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'