|
|
@@ -19,7 +19,14 @@
|
|
|
"machine_nozzle_gantry_distance": { "default": 55 },
|
|
|
"machine_nozzle_offset_x_1": { "default": 18.0 },
|
|
|
"machine_nozzle_offset_y_1": { "default": 0.0 },
|
|
|
- "machine_gcode_flavor": { "default": "RepRap (Marlin/Sprinter)" }
|
|
|
+ "machine_gcode_flavor": { "default": "RepRap (Marlin/Sprinter)" },
|
|
|
+
|
|
|
+ "machine_start_gcode": {
|
|
|
+ "default": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
|
|
|
+ },
|
|
|
+ "machine_end_gcode": {
|
|
|
+ "default": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
|
|
|
+ }
|
|
|
},
|
|
|
|
|
|
"categories": {
|
Arjen Hiemstra